Page 1
Powerful and ecient with
maintenance-free AC drive
motor
Electronically controlled
hydraulic motor for sensitive
lifting and lowering
Electric tiller and Curve
Control ensure easy steering
Safe travelling position with
side arms (optional)
Additional support arm lift
gives increased ground
clearance
Fast lifting of light loads with
Lift-Plus (optional)
ERC 212z/214z/216z
Electric pedestrian stacker with support arm lift (1,200/1,400/1,600 kg)
The ERC 212z/214z/216z electric pedestrian stacker combines the manoeuvrability of a pedestrian stacker with the
option to work comfortably and quickly
as a stand-on truck. The electronically
controlled lift motor ensures quiet and
gentle lifting and lowering of loads at
the touch of a button. It also features a
powerful 24-volt AC drive motor. The
optimum eciency of this motor ensures
powerful acceleration and high speeds
combined with low consumption levels.
The support arm lift is a special feature:
It ensures eortless operation on uneven
floors and ramps with additional ground
clearance – even with full load. Two
pallets can also be transported at the
same time, thus doubling throughput
compared to transporting one pallet
(optional).
With the ride-on option, the ERC also
oers cost-eective handling/transport of goods over longer distances. The
sprung stand-on platform relieves the
strain on the operator. LiftPlus (optional)
enables the ERC 214/216 to achieve a
significantly higher lift speed when lifting
the forks with a light load (up to 400 kg)
in comparison with the standard version.
Depending on the application, an
additional speed version is available
(optional): The 9-km/h version: This
model of the ERC comes with side arms
which help keep the operator safe on the
stand-on platform even when cornering.
It is ideal for transport over longer distances.
Batteries with capacities of up to 375
Ah plus the option of lateral battery exchange for multishift operation ensure
that the ERC will not run out of power
even when working in the most challenging conditions. A built-in charger
(optional) allows easy and reliable battery
charging at any standard 13 Amp mains
socket.
Page 2
ERC 212z/214z/216z
h
4
h
1
h
14 max.
h
14 min.
Duplex ZT
Duplex ZZ
Triplex DZ
1)
with 100 mm free lift
s
h
3
h
2
h
5
h
13
b
b
b
5
11
12
a
2
1100
c
Q
900
170
383
b
b
10
500
1
l
2
249
Wa
a
2
l
x
m
2
y
l
1
l
6
e
Ast
Standard mast types ERC 212z/214z/216z
Lift
h
Lowered mast height
3
h
1
1)
Free lift
h
2
Extended mast height
h
4
(mm) (mm) (mm) (mm)
ERC 212z ERC 214z ERC 216z ERC 212z ERC 214z ERC 216z ERC 212z ERC 214z ERC 216z
2400 - - 1750 - - 100 - - 2925
2500 1750 1750 - 100 100 - 2975 2975 -
2600 - - 1850 - - 100 - - 3125
2700 1850 1850 - 100 100 - 3175 3175 2800 - - 1950 - - 100 - - 3325
2900 1950 1950 - 100 100 - 3375 3375 -
3100 - - 2100 - - 100 - - 3625
3200 2100 2100 - 100 100 - 3675 3675 -
3500 - - 2300 - - 100 - - 4025
3600 2300 2300 - 100 100 - 4075 4075 3800 - - 2450 - - 100 - - 4325
4000 - - 2550 - - 100 - - 4525
4100 - 2550 - - 100 - - 4575 4200 - - 2650 - - 100 - - 4725
4300 - 2650 - - 100 - - 4775 2400 - - 1700 - - 1175 - - 2925
2500 1700 1700 - 1225 1225 - 2975 2975 2800 - - 1900 - - 1375 - - 3325
2900 1900 1900 - 1425 1425 - 3375 3375 -
3100 - - 2050 - - 1525 - - 3625
3200 2050 2050 - 1575 1575 - 3675 3675 3500 - - 2250 - - 1725 - - 4025
3600 2250 2250 - 1775 1775 - 4075 4075 4000 - - 2500 - - 1975 - - 4525
4100 - 2500 - - 2025 - - 4575 4200 - - 2600 - - 2075 - - 4725
4300 - 2600 - - 2125 - - 4775 3990 - - 1830 - - 1298 - - 4522
4090 - 1830 - - 1341 - - 4579 4200 - - 1900 - - 1368 - - 4732
4300 1915 1900 - 1408 1411 - 4807 4789 4590 - - 2030 - - 1498 - - 5122
4690 - 2030 - - 1541 - - 5179 4700 2050 - - 1543 - - 5212 - -
5250 - - 2250 - - 1718 - - 5782
5350 - 2250 - - 1761 - - 5839 -
Page 3
Issue: 04/2011
Technical data in line with VDI 2198
1.1 Manufacturer (short form) Jungheinrich
1.2 Model ERC 212z ERC 214z ERC 216z
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation pedestrian
1.5 Load capacity/rated load Q t 1.2 1.4 1.6
1.6 Load centre distance c mm 600
Identification
1.8 Load distance x mm 910
1.9 Wheelbase y mm 1571
4)
2.1 Service weight kg 1260 1320 1320
2.2 Axle load, w. load, front / rear kg 1190 / 1270 1260 / 1460 1300 / 1620
2.3 Axle load, w.o. load, front / rear kg 950 / 310 990 / 330 990 / 330
Weights
3.1 Tyres Vulkollan
3.2 Tyre size, at front mm Ø 230 x 77
3.3 Tyre size, at rear mm Ø 85 x 95
3.4 Additional wheels (dimensions) mm Ø 180 x 75
3.5 Wheels, number front/rear (× = driven wheels) 1x +1/2
3.6 Track width, front b
Wheels / chassis
3.7 Track width, rear b
4.2 Mast height (lowered) h
mm 507
10
mm 385
11
mm 1950
1
4.2.1 Total height h15 mm
4.3 Free lift h
4.4 Lift h
4.5 Extended mast height h
4.6 Initial lift h
4.9 Height of tiller in drive position min. / max. h
4.15 Lowered height h
4.19 Overall length l
4.20 Length incl. back of forks l2 mm 910
4.21 Total width b1/b2 mm 800
Basic dimensions
4.22 Fork dimensions s/e/l mm 56 / 185 / 1150
4.25 Width over forks b
4.32 Floor clearance centre wheelbase m
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 2266
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2316
4.35 Turning radius Wa mm 1826
mm 100
2
mm 2900 2900 2800
3
mm 3375 3375 3325
4
mm 122
5
mm 1158 / 1414
14
mm 90
13
mm 2060
1
mm 570
5
mm 20
2
3)
3)
2)
1)
4)
5.1 Travel speed, w. / w.o. load km/h 9 / 9
5.2 Lift speed, w. / w.o. load m/s 0.13 / 0.22 0.16 / 0.25 0.15 / 0.25
5.3 Lower speed, w. / w.o. load m/s 0.43 / 0.37 0.37 / 0.34 0.37 / 0.34
data
5.8 Max. gradeability, laden/unladen % 10 / 16 9 / 16 8 / 16
Performance
5.10 Service brake generated
6.1 Drive motor rating S2 60 min. kW 2.8
6.2 Lift motor, output at S3 (on time) 11 % kW 3 3
6.2 Lift motor, output at S3 (on time) 12 % kW 2
6.3 Battery according to DIN 43531/35/36 A,B,C, no B 43535
6.4 Battery voltage/nominal capacity K5 V/Ah 24 / 375
6.5 Battery weight kg 305
Electrics
6.6 Energy consumption according to VDI cycle kWh/h 1.08 1.25 1.39
6.7 Throughput eciency t/h 65
6.8 Energy consumption at max. throughput kWh/h 0.77
8.1 Type of drive control AC SpeedControl
8.4
Misc.
Sound pressure level at operator’s ear according to EN
12053
dB (A) 68
1592
2081
931
2287
2337
1847
3)4)
4)
5)
3)
3)
2)
1)
4)
6)
1592
2081
931
2287
2337
1847
4)
3)
3)
2)
1)
4)
1)
Diagonal according to VDI: + 204 mm
2)
Diagonal in accordance with VDI: + 368 mm
3)
DZ: x - 42 mm; l1 + 42 mm; l2 + 42 mm
4)
Lowered + 54 mm
5)
Tandem Ø 85 x 75 mm
6)
Without side arms; with/without load 6.0/6.0 km/h
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in
different values.
Page 4
Benefit from the advantages
ERC 216z - pallet sideways entry Double-decker mode (optional) Sideways battery removal
Better performance simultaneously
coupled with reduced operating
costs:
• High level of eciency with excellent
energy management.
• Powerful acceleration.
• Rapid direction change.
• SpeedControl – roll-back protection
on gradients.
• No carbon brushes - maintenance-free
drive motor.
Flexible options
Two variants for a range of dierent applications:
Version 1 - folding stand-on platform
without side arms.
• Travel speed of 6 km/h when stand-on
platform is folded down.
• Travel speed of 4.4 km/h when standon platform is folded up.
Version 2 - folding stand-on platform
with side arms (optional).
• 9 km/h travel speed is ideal for driving
long distances, thus increasing
throughput.
Easy stacking and retrieval
All lifting and lowering functions are
comfortably controlled by the multifunctional tiller arm without having to
reach forward. The lift motor is electronically controlled. It allows the forks
to be positioned precisely when stacking
or retrieving and ensures significantly
reduced noise when lifting. Proportional
hydraulics allow goods to be deposited
precisely and gently. In confined spaces
the stand-on platform and side arms
can simply be folded in and the ERC can
be used as a pedestrian truck. LiftPlus
(optional) enables the ERC 214z/216z to
achieve a significantly higher lift speed
with a light load (up to 400 kg) in comparison with the standard version. For
improving throughput when stacking!
Versatile support arm lift
A second lifting mechanism is used to
raise the support arms independently of
the forks. This allows the ERC 212z/214z/216z to negotiate uneven floors,
ramps, and loading docks eortlessly.
Additional advantage: double-decker
transport of two pallets simultaneously
(optional).
Sturdy design
The ERC is designed for high-throughput
operation:
• 8-mm steel chassis.
• Enclosed chassis perimeter.
• Solid mast with high residual capacities
Comfortable and safe operation
• The electric tiller steering is particularly
precise and allows for easy steering
and fatigue-free operation, even in
confined spaces. Curve Control automatically reduces the speed when
cornering to a safe level.
• The sprung stand-on platform accommodates even major surface unevenness, thus eectively removing strain
on the operator’s spine.
• Customised side arms (optional) ensure
a comfortable posture when cornering.
• The low platform height ensures easy
entry/exit.
Long operating times
Large battery capacities for long operating times:
• MX battery compartment: 2 PzS 250 Ah
• LX battery compartment: 3 PzS 375 Ah
• The built-in charger (24V/30A) for wet
cell batteries and maintenance-free
batteries guarantees easy charging
at any standard 13 Amp mains socket
(optional).
• Standard lateral battery exchange is
best for intensive, multishift operation.
Additional equipment
• CanDis control.
• LiftPlus.
• Twin rollers for support wheel to
reduce wear.
• CanCode access control.
• Cold store version.
• Load guard.
• Gentle depositing of load.
• Wear protection of fork skids
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
info@jungheinrich.co.uk
www.jungheinrich.co.uk
The German production
facilities in Norderstedt and
Moosburg are certified.
Jungheinrich fork lift
trucks meet European
safety requirements.
T_ERC 212z/214z/216z_012014_en_UK_000
Loading...