Jungheinrich EJC-212z, EJC-214z, EJC-216z User Manual

Powerful and ecient with
maintenance-free AC drive
motor

Sensitive lifting and lowering
with quiet, speed-controlled
hydraulic motor

Additional support arm lift
gives increased ground
clearance

High residual capacities
thanks to sturdy design and
four-wheel chassis

Electric tiller steering for
especially easy steering
(optional)

Fast lifting of light loads with
Lift-Plus (optional)

EJC 212z/214z/216z

Electric pedestrian stacker with support arm lift (1,200/1,400/1,600 kg)

The EJC 212z/214z/216z pedestrian
stacker is the professional solution for
stacking and retrieving goods. Designed
for high performance at heights of up
to 5350 mm (EJC 214z), high residual
capacities and long uptimes, it achieves
maximum throughput. The electronically
controlled, powerful lift motor provides
smooth and quiet lifting or lowering of
the load at the touch of a button: From
smooth depositing, rapid lifting/lowering
or precisely approaching the racking ­the operator has everything under con­trol at all times.
There is also a powerful 24-volt. 3-phase
AC drive motor. With its optimum

eciency the motor ensures high speeds
and outstanding acceleration in all
situations. LiftPlus (optional) enables the
EJCz 214/216 to achieve a significantly
higher lift speed with a light load (up to
400 kg) in comparison with the standard
version.
The support arm lift is a special feature
on this truck: It ensures eortless oper­ation on uneven floors, ramps, crossing
plates or loading bridges with additional
ground clearance – even with full load. It
also allows two pallets to be transported
simultaneously, doubling the speed of
operation compared to single pallet
transportation (optional).

The robust and rigid frame made of
8-mm thick steel, the stable 4-point sus­pension and the torsion-resistant mast
ensure high residual capacities.
Electric tiller steering (optional) pro­vides greatly reduced steering force for
fatigue-free steering, especially when
driving with the tiller vertical using the
crawl speed button. A built-in charger
(optional) ensures easy, reliable battery
charging at any standard 240-V socket.
Rapid lateral battery exchange enables
the truck to be used in multi-shift oper­ations.

EJC 212z/214z/216z

Ast

Q

c

h

14 max.

1305

h

900

14 min.

l

2

170

l

x

s

h

2

h

5

h

m

2

y

l

1

13

h

4

h

h

1

3

b

1

b

10

Duplex ZT

Duplex ZZ

Triplex DZ

1)

with 100 mm free lift

Wa

a
2

l

6

e

b

b

11

b

5

12

a
2

Standard mast types EJC 212z/214z/216z

Lift

h

Lowered mast height

3

h

1

1)

Free lift

h

2

Extended mast height

h

4

(mm) (mm) (mm) (mm)

EJC 212z EJC 214z EJC 216z EJC 212z EJC 214z EJC 216z EJC 212z EJC 214z EJC 216z

2400 - - 1750 - - 100 - - 2925
2500 1750 1750 - 100 100 - 2975 2975 -

2600 - - 1850 - - 100 - - 3125

2700 1850 1850 - 100 100 - 3175 3175 ­2800 - - 1950 - - 100 - - 3325
2900 1950 1950 - 100 100 - 3375 3375 -

3100 - - 2100 - - 100 - - 3625

3200 2100 2100 - 100 100 - 3675 3675 -

3500 - - 2300 - - 100 - - 4025
3600 2300 2300 - 100 100 - 4075 4075 ­3800 - - 2450 - - 100 - - 4325
4000 - - 2550 - - 100 - - 4525

4100 - 2550 - - 100 - - 4575 ­4200 - - 2650 - - 100 - - 4725
4300 - 2650 - - 100 - - 4775 ­2400 - - 1700 - - 1175 - - 2925
2500 1700 1700 - 1225 1225 - 2975 2975 ­2800 - - 1900 - - 1375 - - 3325
2900 1900 1900 - 1425 1425 - 3375 3375 -

3100 - - 2050 - - 1525 - - 3625
3200 2050 2050 - 1575 1575 - 3675 3675 ­3500 - - 2250 - - 1725 - - 4025
3600 2250 2250 - 1775 1775 - 4075 4075 ­4000 - - 2500 - - 1975 - - 4525

4100 - 2500 - - 2025 - - 4575 ­4200 - - 2600 - - 2075 - - 4725
4300 - 2600 - - 2125 - - 4775 ­3990 - - 1830 - - 1298 - - 4522
4090 - 1830 - - 1341 - - 4579 ­4200 - - 1900 - - 1368 - - 4732
4300 1915 1900 - 1408 1411 - 4807 4789 ­4590 - - 2030 - - 1498 - - 5122
4690 - 2030 - - 1541 - - 5179 ­4700 2050 - - 1543 - - 5212 - -

5250 - - 2250 - - 1718 - - 5782

5350 - 2250 - - 1761 - - 5839 -

Issue: 05/2011

Technical data in line with VDI 2198

1.1 Manufacturer (short form) Jungheinrich

1.2 Model EJC 212z

6)

EJC 214z

1.3 Drive Electrics

1.4 Manual, pedestrian, stand-on, seated, order picker operation pedestrian

1.5 Load capacity/rated load Q t 1.2 1.4 1.6

1.6 Load centre distance c mm 600

Identification

1.8 Load distance x mm 910

1.9 Wheelbase y mm 1571

4)

2.1.1 Net weight incl. battery (see row 6.5) kg 1180 1240 1260

2.2 Axle load, w. load, front / rear kg 1105 / 1275 1180 / 1460 1250 / 1610

2.3 Axle load, w.o. load, front / rear kg 840 / 340 880 / 360 900 / 360

Weights

3.1 Tyres PU

3.2 Tyre size, at front mm Ø 230 x 70

3.3 Tyre size, at rear mm Ø 85 x 95 / 75

3.4 Additional wheels (dimensions) mm Ø 140 x 54

3.5 Wheels, number front/rear (× = driven wheels) 1x +1/2 4

3.6 Track width, front b

Wheels / chassis

3.7 Track width, rear b

mm 507

10

mm 385

11

4.2 Mast height (lowered) h1 mm 1950

4.2.1 Total height h15 mm

4.3 Free lift h

4.4 Lift h

4.5 Extended mast height h

4.6 Initial lift h

4.9 Height of tiller in drive position min. / max. h

4.15 Lowered height h

4.19 Overall length l

4.20 Length incl. back of forks l2 mm 831

4.21 Total width b1/b2 mm 800

Basic dimensions

4.22 Fork dimensions s/e/l mm 56 / 185 / 1150 56 / 185 / 1150 61 / 185 / 1150

4.25 Width over forks b

4.32 Floor clearance centre wheelbase m

4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 2217

4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2267

4.35 Turning radius Wa mm 1777

mm 100

2

mm 2900 2900 2800

3

mm 3375 3375 3325

4

mm 122

5

mm 850 / 1305 850 / 1305 850 / 1295

14

mm 90

13

mm 1981

1

mm 570

5

mm 20

2

3)

3)

2)

1)

4)5)

5.1 Travel speed, w. / w.o. load km/h 6 / 6

5.2 Lift speed, w. / w.o. load m/s 0.13 / 0.22 0.16 / 0.25 0.15 / 0.25

5.3 Lower speed, w. / w.o. load m/s 0.43 / 0.37 0.37 / 0.34 0.37 / 0.34

data

5.8 Max. gradeability, laden/unladen % 8 / 16 8 / 16 7 / 16

Performance

5.10 Service brake generated

6.1 Drive motor rating S2 60 min. kW 1.6

6.2 Lift motor kW rating at S3 7% kW 2.2

6.2 Lift motor, output at S3 (on time) 11 % kW 3 3

6.3 Battery according to DIN 43531/35/36 A,B,C, no no

6.4 Battery voltage/nominal capacity K5 V/Ah 24 / 375

Electrics

6.5 Battery weight kg 300

6.6 Energy consumption according to VDI cycle kWh/h 1.02 1.25 1.31

8.1 Type of drive control AC SpeedControl

8.4

Misc.

Sound pressure level at operator’s ear according to EN
12053

dB (A) 60 63 63

1592

2002

852

2238

2288

1798

6)

3)4)

4)

3)

3)

2)

1)

4)5)

EJC 216z

1592

2002

3)

852

2238

2288

4)5)

1798

6)

4)

3)

2)

1)

1)

Diagonal according to VDI: + 204 mm

2)

Diagonal in accordance with VDI: + 368 mm

3)

DZ: x - 42 mm; l1 + 42 mm; l2 + 42 mm

4)

Load section lowered: 54 mm

5)

Tiller in upright position (crawl speed)

6)

Values for standard mast 290/280 ZT

In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in
different values.

Benefit from the advantages

Negotiating a ramp with the EJC
212z/214z/216z

Double-decker mode (optional) CanDis and CanCode display

“Intelligent” controls and progressive
drive technology

Jungheinrich three-phase AC motors
oer greater performance whilst reduc­ing operating costs. Make the most of
these advantages:

• High level of eciency with excellent
energy management.

• Powerful acceleration.

• Rapid direction change

• Jungheinrich SpeedControl - roll-back
protection on inclines.

• No carbon brushes – maintenance­free drive motor.

Versatile support arm lift

A second lifting mechanism, the support
arm lift, is used to raise the support arms
independently of the forks. As a result,
the EJC 212z/214z/216z can overcome
uneven ground, ramps and loading
bridges with ease. Support arm and mast
lifts operate independently of each other.
The advantage: Double-decker transport
of two pallets simultaneously is possible
(optional).

Safe and comfortable stacking and
retrieval

All lifting and lowering operations are
easily controlled by the multi-functional
tiller arm. This allows the operator to
concentrate fully on stacking and re­trieving. Other safety features that make
stacking safe and ecient include:

instruments

• Precise, sensitive load lifting by speed
controlled and noise-reduced hy­draulic motor.

• LiftPlus (optional) enables the EJCz
214/216 to achieve a significantly
higher lift speed with a light load (up to
400 kg) in comparison with the stan­dard version. For improving throughput
when stacking!

• Gentle depositing of loads using pro­portional hydraulics.

• Additional reduction of travel speed
from lift heights of approx. 1.8 m.

• Rounded and enclosed truck contours.

• Four-wheel concept for maximum
stability.

High performance in every situation

The EJC 212z/214z/216z has been de­signed for intensive operation. Its power­ful lift motor (2.2/3 kW) and dynamic 1.6
kW drive motor in 3-phase AC technol­ogy ensure maximum throughput. Other
advantages:

• 8 mm thick steel frame.

• Heavy-duty rolled box section forks.

• Torsion-resistant mast with high
residual capacities.

Service-friendly design

• Slow travel with lowered forks reduces
fork wear (optional).

• Service access ports on front apron.

• Support wheel with intelligently de­signed “bayonet” mechanism enables
the wheel to be replaced from the top
without having to raise the truck.

Fully informed at all times

Extensive instruments and setting
options allow the operator to monitor
the situation at a glance:

• Discharge indicator (3-colour LED)
with lift cut-out.

• CanDis information display (optional)
showing operating hours and control
messages.

• Activation of truck via PIN and selec­tion of 3 travel programs via CanCode
(optional).

• Travel parameters can be set via CanDis
and CanCode (optional).

Long uptimes

Large battery capacities ensure long
uptimes:

• MX battery compartment: 2 PzS 250 Ah

• LX battery compartment: 3 PzS 375 Ah

• On-board charger (24V/30A) for wet
cell batteries and maintenance-free
batteries for easy charging at any 230 V
mains socket (optional).

• The standard side battery removal, for
intensive multi-shift operation.

Additional equipment

• Twin rollers for support wheel to
reduce wear

• Cold store version.

• Tandem load rollers.

• Load guard.

• Slow depositing of the load on the
ground.

Jungheinrich UK Ltd.

Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone [phone]
Fax [phone]

[e-mail]
www.jungheinrich.co.uk

The German production

facilities in Norderstedt and

Moosburg are certified.

Jungheinrich fork lift

trucks meet European

safety requirements.

T_EJC 212z/214z/216z_012014_en_UK_000