LZ-2280N
Series
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
LZ-2284C-7
LZ-2280N Series
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
LZ-2282N-7/CP-180A
The sewing machine produces soft seams with
consistency with a low tension applied to
the thread even when it runs at a high speed.
Uneven feed of the upper and lower cloths is totally eliminated
With its newly developed feed mechanism, the machine prevents “uneven feed of the upper
and lower cloths” when sewing girdles and body suits made of slippery, elastic materials.
Simplified mechanism for easy operation
Drop-feed sewing machines are widely said to feed in the lower cloth more quickly than the
upper cloth. However, this machine prevents uneven feed of the upper and lower cloths in
spite of its a drop-feed mechanism. In appearance, the gauge parts are identical to those of
a conventional zigzag stitching machine, and operability is in no way affected by the newly
developed feed mechanism.
Highly reliable models in the LZ-2280N series that
respond to many different kinds of sewing specifications.
LZ-2280NU series Conventional machine
LZ-2282N / LZ-2282N-7
LZ-2284C-7 LZ-2285N
Productivity is dramatically increased
The machine incorporates a built-in lower knife that trims only the lower material. This allows the
machine to simultaneously attach lace to the body of the foundation and trim only the body during
processes to attach lace to the bottoms or tops of slips or to the joint seam lines of shorts.
The pressure provided by the left- and
right-hand sections of the fagoting holder
can be separately adjusted in order to
prevent an uneven material feed.
The machine demonstrates consistent trimming performance
The knife is driven by a motor that runs independently from the sewing machine motor. With this
feature, the knife can continue to run at a high speeds during trimming even when the speed of the
machine is reduced during startup or when sewing curved sections. Furthermore, the knife is placed
just beside the needle to provide a constant trimming width even on the curved sections.
This is a cylinder-bed, lockstitch zigzag stitching machine based on the LZ-2284N-7
model. The cylinder-bed more than adequately facilitates the handling of tubular sewing
products in circular sewing processes, thereby contributing to increased productivity and
upgraded seam quality. This zigzag stitching machine is best suited to the attaching or
counter stitching of elastic tape.
High-speed, 1-needle, Lockstitch, Standard Zigzag Stitching Machine
with Lower Knife
LZ-2282N
High-speed, 1-needle, Lockstitch, Standard Zigzag Stitching Machine
with Lower Knife (with automatic thread trimmer)
LZ-2282N-7
High-speed, 1-needle, Lockstitch, Fagoting Machine
LZ-2285N
High-speed, Cylinder-bed, 1-needle, Lockstitch, Zigzag Stitching Machine
with Automatic Thread Trimmer
(with standard/3-step zigzag stitching pattern changeover function)
LZ-2284C-7
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
with Anti-material-slip type
LZ-2280NU
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
with Anti-material-slip type
(with standard/3-step zigzag stitching pattern changeover function)
LZ-2284NU
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
with Anti-material-slip type (with standard/3-step zigzag stitching
pattern changeover function and automatic thread trimmer)
LZ-2284NU-7
The sewing machine provided with an anti-material-slip
function, which promises more beautifully finished seams,
is included in three different model lineups.
Soft seams can be produced by lowering
the bobbin thread tension.
GRF0100000B0 (asm.)
400-16408 Hook gib VS
Presser foot connecting components
① B1551-586-000
Presser foot connecting foot
② SS-7090910-TP
Screw
The aforementioned parts are used when a lockstitching type presser foot is installed on
the machine. Select a parts set of either the presser-bar changing type or the presser bar
joining type, according to the type of presser foot of your machine.
The device enables the operator to perform reverse feed
stitching using the pedal without using the right hand.
OPTIONS
SPECIFICATIONS
LZ-2282N LZ-2285N
—
LZ-2280NU LZ-2284NU
LZ-2282N-7
—
LZ-2284C-7
—
LZ-2284NU-7
Model
—
M097
Part No.
225-61559
MAM-097000A0
Description
Automatic reverse feed Kit
Fagotting feller asm.
(down-rolled type)
Feature
Model
name
5,000sti/min
＊
Provided as standard
Provided as standard
Provided as standard
Provided as standard
—
—
—
—
4,500sti/min
＊
235-12817
235-12908
235-13062
100-61554
100-64004
225-91564
225-48010
225-48119
225-48671
225-82407
225-81508
235-03162
Without automatic thread trimmer
With automatic thread trimmer
Standard zigzag
10.0mm
1
2
Parts for sewing with thick thread
(recommended needle:
DP×5 #21, 134SUK Nm130)
Pedal-operated reverse feed
stitching device (RF-1)
Presser foot connecting components
Hook gib
225-56054 Knife unit
D1440-583-H00 Needle thread guide
400-17095 Thread tension disk (asm.)
225-80369 Presser foot (asm.)
This device allows a machine without thread trimmer to perform automatic
reverse feed function.
RF-1 GRF-010000B0
The device enables the operator to perform reverse feed stitching using the
pedal without using the right hand. (excluding the LZ-2285N)
This is the exclusive fagot stitch folder for the LZ-2285N, which is applicable to
the sewing of lingerie, foundation garments and baby wear.
(The fagot stitch folder asm. (up-rolled type):
The MAM-09700BA0 has been factory-installed on the machine prior to delivery.)
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Lift of the presser foot
Min. cutting allowance of lower knife
Lower knife driving method
Hook
Thread take-up
Lubrication
Lubricating oil
Needle (at the time of delivery)
Needle position changing mechanism
Reverse feed stitching mechanism
Needle throw pattern cam
Standard Guage
(at the time
of delivery)
Needle plate
Feed dog
Presser foot (asm.)
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
438 (Nm70),
DP×5 (#10)
438 (Nm70),
DP×5 (#10)
5,000sti/min
＊
4.5mm
2.5mm
3.0mm
AC motor
Standard zigzag
(with lower knife)
By hand: 4.0mm
By knee: 8.5mm
Triangular cam Triangular camGrooved cam Grooved cam
4,000sti/min
＊
8.0mm
2.2mm
Fagoting
By hand: 5.5mm
By knee: 8.0mm
By hand: 5.5mm
By knee: 10.0mm
438 (Nm80) 438 (Nm80)
Standard/
3-step zigzag
10.0mm (standard)
10.0mm (3-step)
2.5mm (standard)
2.0mm (3-step)
＊
sti/min stands for Stitches per Minute.
Pedal-operated reverse
feed stitching device
SEWING MACHINERY BUSINESS UNIT
OCTOBER, 2013 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE : (81) 42-357-2254
FAX :
(
81
)
42-357-2274
http://www.juki.com
✽
Specifications and appearance are subject to change without prior notice for improvement.
✽
Read the instruction manual before putting the machine into service to ensure safety.
✽
This catalogue prints with environment-friendly soyink on recycle paper.
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3)
Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
WHEN YOU PLACE ORDERS
Machine head
Type
Standard zigzag (with anti-material-slip type)
Code
0NU
Standard zigzag (with lower knife) 2N
Standard/3-step zigzag (with anti-material-slip type)
4NU
Fagoting 5N
Type Code
Standard zigzag (with lower knife) 2N
Standard/3-step zigzag (anti-material-slip type)
4NU
Power supply Code
single-phase 100~120V S
3-phase 200~240V
D
single-phase 200~240V(for General Export) K
single-phase 200~240V(for CE)
N
single-phase 200~240V(for China)
U
Automatic reverse feed function
Wiper and automatic reverse feed function
Code
Provided WB
Provided
Wiper
Not provided
Provided
0B
LZ228
Automatic reverse feed function
Not provided
Code
Provided
0B
LZ228 7
Auto-lifter Code
Not provided
Provided (AK83)
AK
Automatic reverse feed function
Wiper and automatic reverse feed function
Code
Provided WB
Provided
Wiper
Not provided
Provided
0B
Auto-lifter Code
Not provided
Provided (AK83)
AK
LZ2284C7
Please note when placing orders, that the model name should be written as follows:
LZ-2280N series (without automatic thread trimmer)
Machine head
SC920C
Control box
M92
Motor
CP18A
CP180A
Operation panel
Power supply Code
single-phase 100~120V S
3-phase 200~240V
D
single-phase 200~240V(for General Export) K
single-phase 200~240V(for CE)
N
single-phase 200~240V(for China)
U
SC921C
Control box
M92
Motor
CP18A
CP180A
Operation panel
LZ-2280N-7 series (with automatic thread trimmer)
Machine head
LZ-2284C-7 (Cylinder-bed type)
Loading...