Juki LU-2828V-7, LU-2860V-7 User Manual

SPECIFICATIONS

■

Model name

Type

Max. sewing speed

Max. stitch length

Presser foot

Alternating vertical movement(DL)

Needle thread tension

Presser foot pressure

Hook

Needle

Thread

Machine head weight

"sti/min" stands for "Stitches per Minute."✽

WHEN YOU PLACE ORDERS

Machine head

[

1-needletype]

Shorter - thread remaining type

Head type

2.7 fold-capacity hook /

LU-2828V-7 LU-2860V-7

1-needle, Unison-feed, Lockstitch Sewing System

(Shorter - thread remaining type)

Vertical axis 2.7 fold-capacity hook Vertical axis 2.0 fold-capacity hook

134×35 Nm140（#22）, Nm125〜180（#20〜#24）

60/3 〜 20/3（#30〜#5）

Code

Gauge type

Gauge for europe

Code

Nipper / one-touch type

reverse feed

2-needle, Unison-feed, Lockstitch Sewing System

3,500sti/min

12.0mm9.0mm

20mm

9.0mm

0〜200

134×35 Nm160（#23）, Nm125〜200（#20〜#25）

60/3 〜 10/3（#30〜#0）

68Kg66Kg

DL functionSCode

Attached

Provided

Code

LU-2800V-7 Series

Semi-dry Direct-drive, Unison-feed, Lockstitch Sewing System with automatic thread trimmer

DIGITAL SEWING SYSTEM

Commitment to sewing

Next-generation sewing system

[

2-needletype]

Control box

VA7NBBSLU2828

Digital type

Digital

Head type

2.0 fold-capacity hook / 12mm pitch

Code

Provided (pedal-driven)

Code

Automatic foot lifter

VALLU2860

Digital type

Digital

Code

Gauge type

Gauge for europe

SC952A

Single-phase 100~120V 3-phase 200~240V Single-phase 200~240V (for general export) Single-phase 200~240V (for ce) Single-phase 200~240V (for china)

Power supply

Needle Gauge

6mm 8mm

10mm

Code

S D K N U

Code

Skip stitch detector / Bobbin thread

remaining detector / Cover sensor unit

Code

Nipper / one-touch type

B C

Not provided / Provided

70BBS

DL function

Attached

Option type

Not provided

reverse feed

Code

Skip stitch detector / Bobbin thread

remaining detector / Cover sensor unit

Code

Option type

Not provided

Automatic foot lifter

Provided (pedal-driven)

Code

LU-2828V-7

LU-2860V-7

2-11-1, TSURUMAKI, TAMA-SHI,

TOKYO

206-8551, JAPAN

PHONE : (81) 42-357-2383

)

(

42-357-2274

FAX :

SEWING MACHINERY & SYSTEMS BUSINESS UNIT

Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalogue prints with environment-friendly soyink on recycle paper.

http://www.juki.com

Registered Organization : The Scope of the Registration : The activities of research, development, design, sales, distribution, and maintenance services of industrial sewing machines, household sewing machines and industrial robots, etc., including sales and maintenance services of data entry systems.

DECEMBER, 2017 Printed in Japan(TN)

Head Office

LU-2800V-7 Series

Management of sewing performance and sewing machine with JUKI's next-generation sewing system.

LU-2828V-7

Semi-dry Direct-drive, 1-needle, Unison-feed, Lockstitch Sewing System with automatic thread trimmer (Vertical axis 2.7 fold-capacity hook / Shorter - thread remaining type)

Machine is mounted with inbuilt NFC (Near Field Communication) and communication devices capable of a 2-way data transmission.

Needle thread tension active tension (Digital control)

Needle thread clamping device

Presser foot pressure (Digital control)

Presser foot height (Digital control)

Multi-layered part detection (Digital control)

Bobbin thread spool device

Direct-drive motor

Color touch panel

6-string switch

Jog dial

Standby switch

Shorter - thread remaining type

The shorter-thread remaining type LU-2828V-7 is a high-performance sewing machine. It leaves a shorter thread on the material at the beginning of sewing by means of the needle thread clamp device, as well as at the end of sewing by means of the thread trimmer which is provided with a shorter-thread remaining function. This means that manual thread nipping both at the beginning and at the end of sewing is no longer required, thereby helping reduce operator fatigue. Thanks to the adoption of a 2.7-fold hook, the frequency of bobbin thread changing is reduced and workability is improved.

Beautiful finished seams

Needle thread clamping device

This device pulls the needle thread into the wrong side of the material at the beginning of sewing, thereby ensuring more beautifully-finished seams.

The shorter-thread trimming mechanism (needle thread roll-in and shorter-thread remaining type)

The material at the beginning of sewing

Surface side

The needle thread does not remain on the surface side of the material. (The needle thread clamp is turned ON.)

Back side

LU-2828V-7 can produce the effect of shorter-thread remaining by making condensed stitch. ✽

Remaining-thread length : 5mm

The material at the end of sewing

Stitch length (Digital control)

Alternating vertical movement (Digital control)

Standard equipment

Bobbin thread spool device

Bobbin thread spool device is no necessity of rolling thread manually.

Maintenance work carried out safely (Standby switch)

When the standby switch is pressed, the sewing machine does not start unexpectedly even if the pedal is depressed. When the standby switch is pressed, operations through the operation panel, and with the machine 6-string switch and jog dial are also disabled, thereby allowing sewing-machine maintenance work such as threading, needle replacement, gauge replacement to be carried out safely. (In this case, the pulley can be turned by hand.)

High-torque direct-drive motor is installed

The direct-drive motor system has been adopted by all of the sewing system with a thread trimmer. As a result, the sewing machine starts up swiftly and promises increased stop accuracy, thereby demonstrating improved responsiveness.

LED Light

The LED light can adjust the light intensity to 5 levels, and Off setting is also possible. The operator can set the brightness which is easy to work, improving work efficiency.

The thread trimming mechanism has been completely renewed. The industry's shortest remaining thread length achieved by trimming the thread close to the fixed knife at the last stitch (condensed stitch). (The length of remaining needle thread is 5mm)

Semi-dry Direct-drive, 2-needle, Unison-feed, Lockstitch Sewing System

LU-2860V-7

High and long arm has been adopted. The machine is suited to sew car seats, sofas and bags. It is a sewing machine provided with dramatically improved workability and functions which are required for sewing large products and extra heavy-weight materials.

Car seat

Bag

with automatic thread trimmer (Vertical axis 2.0 fold-capacity hook / 12mm - pitch type)

Sofa

The maximum stitch length is 12 mm

This model is the most-desired sewing machine for sewing furniture such as sofas. It is best-suited to topstitching with a stitch length of maximum 12mm - pitch. During the topstitching process, the longer distance from the machine arm to the bed, in particular, effectively demonstrates the machine's improved workability.

The maximum stitch length is 12 mm

General stitch length is 6mm

+ 2 hidden pages