LU-2800-6 Series
Semi-dry, Unison-feed, Lockstitch Machine
with automatic thread trimmer of V-Belt type
High and long arm has been adopted.
The long distance from the machine arm to the needle contributes to improved workability.
The V-belt type machine head
the machine lineup following the Direct-Drive type.
LU-2810-6
is added to
1-needle, Vertical-axis Large Hook
LU-2810-6
1-needle
type
LU-2860-6
1-needle, Vertical-axis 2.7 Fold-Capacity Hook
(needle thread roll-in and shorter - thread remaining type)
LU-2828-6
2-needle
type
2-needle, Vertical-axis Large Hook
LU-2860-6
Functions for improving seam quality and workability.
LU-2810-6
Semi-dry, 1-needle, Unison-feed, Lockstitch Machine
with Vertical-axis Large Hook
LU-2860-6
Semi-dry, 2-needle, Unison-feed, Lockstitch Machine
with Vertical-axis Large Hook
High and long arm has been adopted. The machine
is suited to the sewing of car seats, sofas and bags.
It is a sewing machine provided with dramatically
improved workability and functions which are
required for sewing large products and extra
heavy-weight materials.
LU-2860-6
The long distance from the machine
arm to the needle contributes to
improved workability
Dramatically advanced availability for material
In addition to the one-touch type reverse
feed switch, a multi-functional 6-string
switch is also provided.
①Alternating vertical movement of the
walking foot and presser foot changeover
②Automatic reverse feed stitching
prohibition ③One-stitch correction ④Stitch
length changeover ⑤Tension disk No.1
open/close ⑥Needle thread clamp
347mm
127
mm
LU-2828-6
2.0 / 2.7 fold-capacity hookMulti-functional 6-string switch
With the adoption of this vertical-axis 2.0 / 2.7
fold-capacity hook, the frequency of bobbin
thread winding is reduced, promising sewing
work of increased efficiency. The hook which
can be adjusted with screw amout of needle
guard contact to needle.
LU-2860-6
LU-2828-6LU-2810-6/
LU-2828-6
Semi-dry, 1-needle, Unison-feed, Lockstitch Machine
with Vertical-axis 2.7 Fold-Capacity Hook
(needle thread roll-in and shorter-thread remaining type)
Beautiful finished seams
The material at
the beginning of sewing
Surface side
The needle thread does not remain on the surfase side of the material.
(The needle thread clamp is turned ON.)
This is a high-performance machine which
no longer requires thread picking at
the beginning and end of sewing.
The shorter-thread trimming mechanism
The material at
the end of sewing
(needle thread roll-in and shorter-thread remaining type)
The thread trimming mechanism has been completely
renewed. The industry's shortest remaining thread
length achieved by trimming the thread close to the
fixed knife at the last stitch (condensed stitch).
(The length of remaining needle thread is 5mm)
LU-2828-6
Double tension provided as :
standard
A dual-tension is provided as standard
responding to the sewing with thick thread
under a higher tension
Walking-foot/presser-foot alternating
vertical movement mechanism
9mm
The adopted feed mechanism makes up
less variance of the balance of the
alternating vertical movement amounts.
The maximum presser foot lift is 9mm
which can be adjusted with ease by the
large dial on top of the machine head.
New bobbin thread spool device New lubrication system
When the needle thread clamp at the beginning
of sewing is turned ON, the needle thread is not
remained on the front side.
Higher lift of the presser bar
A presser bar height of 20mm is achieved
when using the automatic presser bar lifting
lever. Thanks to this feature, the process of
joining leather and heavy-weight sponges,
which are usually used as materials for
expensive sofas, can be carried out with
ease.
Eccentricity of the feed driving
cam is adjustable.
①②③④⑤ ⑥
2.7 fold-capacity hook2 fold-capacity hook
Stitch length can be changed
over among different lengths.
2-pitch dial
20mm
The sewing machine with a thread trimmer
is provided as standard with a 2-pitch dial.
One unit of this sewing machine is able to
sew different sewing lengths since the
sewing length can be instantaneously
changed over.
Adjustable
screw
Back side
Remaining-thread length : 5mm
※LU-2828-7 can produce the effect of shorter-thread remaining by making condensed stitch
New bobbin thread spool device is no
neccessity of winding thread manually.
The spool device easy starts winding
thread just by setting the bobbin.
Adjustment of the eccentricity of the feed
driving cam has been enabled. As a result,
the sewing machine is able to perform
sewing with the feed that is best-suited to
the material and thread used. It is no longer
necessary to prepare other subclass model
sewing machines.
Lubrication system is powerful and stable
even low speed.
Suspended ruler H152
Description
Suspended ruler
(asm.) H152
※
Screw
※The parts is contained in the accessories of a head.
Parts No.
MAH-152010A0
SM6061402TP ×2
Presser foot with center guide
(LU-2860-6 : for europe gauge)
Needle Gauge
B : 6mm
C : 8mm
D : 10mm
E : 12mm
※For standard gauge, please contact your nearest JUKI distributor.
Parts No.
40038810
40038808
40038806
40038802
Slide plate with window
Description
Slide plate with window
(LU-2810/60) (right or left)
Slide plate with window
(LU-2828) (right)
Parts No.
40133312
40155087
SPECIFICATIONSATTACHMENTS
Model name
Type
Max. sewing speed
Max. stitch length
Stitch length dial
Presser foot
Auto lifter
Alternating vertical movement
Alternating vertical movement
adjusting method
DL device
Needle thread tension
Bottom-feed micro-adjustment
mechanism
Hook
Needle
Thread
Lubrication
One-touch type
reverse feed switch
Hand switch
Safety mechanism
Machine head weight
＊"sti/min" stands for "Stitches per Minute."
1-needle
(with automatic thread
trimmer of V-Belt type)
(with automatic thread
trimmer of V-Belt type)
3,000sti/min 3,000sti/min2,700sti/min
Auto: 20mm, By hand: 10mm
Provide as standard
Provide as standard
Single/Double-tension
Provided as standard
Vertical axis
2 fold-capacity hook
135×17 Nm160
(Nm125~Nm180)
#30~#5, B46~B138, Mn=60/3~20/3
Automatic (Tank system)
Provide as standard
Multi-functional 6-string switch
Provided as standard (reset with the push of a button)
62kg 67kg
LU-2860-6
2-needle
9mm
2 pitch dial
1~9mm
Large dial
LU-2828-6LU-2810-6
1-needle
(with automatic thread
trimmer of V-Belt type)
Vertical axis
2.7 fold-capacity hook
134×35 Nm140
(Nm125~Nm180)
62kg
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
Machine head
[
1-needle (with automatic thread trimmer
Head type
Standard type
2.7 fold-capacity hook and
shorter-thread remaining type
Code
10
28
Machine head
[
2-needle (with automatic thread trimmer
※ In case of “ S ” type
in Gauge type, please
choose from below.
Needle Gauge
3.2mm
4.8mm
6.4mm
7.9mm
9.5mm
12.7mm
JUKI ECO PRODUCTS
※ In case of “ A ” type
Needle Gauge
Code
C
D
F
H
K
L
in Gauge type, please
choose from below.
4mm
6mm
8mm
10mm
12mm
The LU-2800-6 Series is an eco-friendly product which complies with
JUKI ECO PRODUCTS standards for protecting the environment.
) ]
Gauge type
Standard gauge
gauge for europe
＊LU-2828 can be select only “ A ”
) ]
Code
A
B
C
D
E
LU28 60BBS
Code
S
A
Gauge type
Standard gauge
gauge for europe
Wiper and one-touch type reverse feed
One-touch type reverse feedWiper
Code
S
A
LU2860 60BBS
Automatic foot lifter
with AK (pedal-driven)
The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of
hazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.
For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco_e/index.html
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.
※Above-mentioned JUKI ECO PRODUCTS is data of LU-2810-6 (with automatic thread timmer).
ProvidedNot provided
Wiper and one-touch type reverse feed
Code
0B
(pedal-driven)
One-touch type reverse feedWiper
ProvidedNot provided
Alternating vertical dial
Code
B
Automatic
foot lifter
with AK
Provided
Code
0B
Code
B
Code
S
Alternating
vertical dial
Provided
Code
S
To order, please contact your nearest JUKI distributor.
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO
206-8551, JAPAN
PHONE : (81) 42-357-2254
(
FAX :
SEWING MACHINERY BUSINESS UNIT
Specifications and appearance are subject to change without prior notice for improvement.
Read the instruction manual before putting the machine into service to ensure safety.
This catalogue prints with environment-friendly soyink on recycle paper.
http://www.juki.com
)
81
42-357-2274
Registered Organization :
The Scope of the Registration : The activities of research,
development, design, sales, distribution, and maintenance
services of industrial sewing machines, household sewing
machines and industrial robots, etc., including sales and
maintenance services of data entry systems.
MARCH, 2015 Printed in Japan(C)
Head Office
Loading...