John Deere 435C, 535, 335C, 437C, 530B Specifications
335C, 435C, 437C, 530B, 535
As Required
• Check air filter restriction indicator and ducting • Drain water and sediment from fuel tank
• Check fire extinguisher • Check and drain fuel/water separator
Every 10 Hours or Daily
• Check engine oil level
• Check air filter restriction indicator and ducting
• Check engine coolant level • Lubricate boom and cylinder pivots
• Check and drain final fuel filter water separator • Lubricate stabilizer and cylinder pins
• Check hydraulic oil level
• Check windshield washer fluid level • Fill fuel tank
• Check hydraulic filter restriction indicator
• Check and clean shroud
• Check swing drive gearbox oil level
Every 50 Hours or weekly
• Check fire extinguisher • Check pump mounting bolts torque
• Check loader mounting bolts torque • Lubricate grapple rotator
• Check engine mounting bolts torque • Check boom and cylinder pin retainers (torque if required)
• Check heel mounting bolts torque • Check stabilizer and cylinder pin retainers torque
Initial Service - 100 Hours**
• Change engine break-in oil
• Change oil in the swing drive gearbox
**Perform initial service once after the first 100 hours of operation
Every 100 Hours
• Check seat belt and belt support • Check battery water level
• Visually inspect swing gearbox mounting cap screws (torque if required)
Every 250 Hours
• Change engine oil
• Change hydraulic oil return filters
• Change engine fuel filter • Drain water and sediment from fuel tank
• Take engine oil analysis sample--250 hours (recommended), 500 hours (maximum)
Every 500 Hours
• Change fuel/water separator filter element
• Check turntable bearing mounting screws (torque if required)
• Take engine oil analysis sample--250 hours (recommended), 500 hours (maximum)
Every 1000 Hours
• Change swing gearbox oil
Every 2000 Hours
• Change hydraulic oil • Clean case drain strainer element
• Change engine coolant and flush cooling system • Check engine belt and tensioner
Every 4500 Hours
• Replace engine crankshaft dampener
• Lubricate grapple
• Lubricate ring gear and turntable bearings
• Check operation of engine gauges and warning lights
• Clean external surfaces and engine compartment
• Check and clean radiator and oil cooler fins
• Change engine oil filter
• Replace engine oil filter
• Take hydraulic oil analysis sample
• Change engine air filters
• Take engine coolant analysis sample
• Take diesel fuel analysis sample• Check engine fan belt tension
F392679 25SEP08
F392680-28 | F392683-63
A
REQUIRED PARTS
Engine Oil Filter
Engine Oil Filter
Final Fuel Filter
Final Fuel Filter
Primary Fuel Filter (Water Separator)
Primary Fuel Filter (Water Separator)
Air Filter (Primary)
Air Filter (Primary)
Air Filter (Safety)
Air Filter (Safety)
Vacuator Valve
Hydraulic Reservoir Return Oil Filter
Element Only
Hydraulic Reservoir Return Oil Filter
Part Number
RE59754
RE57394
RE62419
AR86745
RE62424
RE508633
T191321
F435742
AT175224
T158495
F061786
F309199
T175223
ab
ab
abc
abc
abc
ab
c
ab
c
ab
c
c
c
Initial
Service -
100 Hours
Every 250
Hours
Every 500
Hours
Every 1000
Hours
111111
111111
11111
11111
1111
1111
1111
1111
1111
1111
As Required
22222
As Required
Every 2000
Hours
Every 4500
Assembly. (Includes Filter Element,
Filter Housing, Spring and O-Ring)
Engine Crankshaft Dampener
Engine Crankshaft Dampener
Pilot Pressure Filter
Engine Cold Start Canister
(If Installed)
Hydraulic Reservoir Breather Filter
Engine Crankcase Oil
(John Deere PLUS 50™ Engine Oil)
Engine Crankcase Oil
(John Deere PLUS 50™ Engine Oil)
Swing Drive Oil
RE59355
RE529907
842964900
AT171162
F309181
TY6389*
TY6389*
TY6345*
ab
c
abc
abc
abc
ab
19.0 L 19.0 L 19.0 L 19.0 L 19.0 L 19.0 L
As Required
As Required
As Required
(5 gal) (5 gal) (5 gal) (5 gal) (5 gal) (5 gal)
c
28.5 L 28.5 L 28.5 L 28.5 L 28.5 L 28.5 L
(7.5 gal) (7.5 gal) (7.5 gal) (7.5 gal) (7.5 gal) (7.5 gal)
abc
6.8 L 6.8 L 6.8 L
(7.2 qt) (7.2 qt) (7.2 qt)
Hydraulic Oil
TY25852*
abc
378.0 L
(100.0 gal)
Engine Break-In Oil
Cool-Gard Coolant
TY22041*
TY16036
abc
abc
As Required
21 L
(5.5 gal)
Coolant Conditioner
TY16004
abc
.5 L (1 pint) .5 L (1 pint) .5 L (1 pint) .5 L (1 pint)
Fluid Analysis Kits**
Diesel Engine Oil Test Kit
Hydraulics and Power Train Test Kit
DieselScan™ Test Kit
COOLSCAN PLUS™ Test Kit
3-Way Heavy Duty Coolant Test Kit
AT317904 11111
AT303189 11111
AT180344 1111
AT183016 1111
TY16175 1111
* See operator's manual for recommended oil type and oil viscosities based on operating temperatures
** Based on fluid analysis results, intervals may need to be adjusted for your operating conditions. Consult your local John Deere Dealer.
Hours
1
1
a
For models 335C, 435C
b
For models 437C
c
For models 530B, 535, 535C
F392679 25SEP08
F392680-28 | F392683-63
Loading...