410B BACKHOE LOADER
- -
-----
Model shown may inelude options
ENGINE PERFORMANCE
Nm Ib-ft
244 I 180
w
=>
~ 217 I 160
~
Ii;190 I 140
z
163 I 120
Ibl
glkWh hph
...J 274 0.45
~ 243 0.40
lL
213 0.35
1000 I 1400 I 1800 I 2200 I 261>0
1200 1600 2000 2400
ENGINE SPEED - RPM
.With optional turbocharger
60
hp
IkW
7OT5i
60 I45
50137~
40130~
30 122
1520
FEATURES
62 SAE net hp (46.2 kW)
Backhoe digging depth (SAE) 14 ft. 6 in. (4.42 m)
Unitized frame
Isolated engine and
operator's station
Walk-in front entry
cr
w
Designed for quietness
a.
Closed-center hydraulic system
.....
Weight distributed for working stability
Self-adjusting hydraulic wet-disk brakes
Inboard planetary final drives
Transaxle 1st and 2nd collar shift,
3rd and 4th synchronized
Full-power-shift reverser
Torque converter
Single-lever loader control
Two-lever backhoe control
Two-lever stabilizer control
Stabilizer lockouts-raise and lower
Multi-adjustable swing-around seat
w/high backrest and armrests
Hydrostatic power steering
Soundproofed cab w/integral ROPS/FOPS
Vandal protection w/built-in locks
ADD VERSATILITY WITH:
Mechanical front-wheel drive witH
Wet clutch-engage on the go
Offset driveshaft for better
ground clearance
Extendable dipperstick
fi:
",ith:
go
--- --~-
~_n - --- -
410B BACKHOELOADERSPECIFICATIONS
(Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE Standards. Except where otherwise noted, these specifications
are based on a unit with 17.5L-24, 10 PR, R4 rear tires; 11L-15,10 PR, F3 front tires; 1.0-cu.-yd. (0.76 m3) loader bucket; 24-in. (610 mm) standard duty backhoe bucket, RaPS/FOPS, full
fuel tank and 175-lb. (79 kg) operator.)
Rated Power @2500 rpm: SAE
Net 62hp(46.2kW)
DIN 70 020
49 kW
Gross 66hp(49.2kW)
Net engine power iswith standard equipment including air cleaner, exhaust system, alter-
nator, and cooling fan, at standard conditions per SAE J1349 and DIN70020, using No. 2-
0 fuel @35 API gravity. No derating is required up to 5000 feet (1500 m) altitude. (With
optional ACT", 10,000 feet (3050 m) altitude.) Gross power iswithout cooling fan.
.Altitude compensating turbocharger
Engine: John Deere 4-219D
Type. . . . . . . . . . . . . . . . . . 4-strokecycle,naturallyaspirated diesel
Boreand stroke. . . . . . . . . . . . . . . . 4.02 x 4.33 in. (102x 110 mm)
No.ofcylinders 4
Displacement 219cu.in.(3.589L)
Maximumnettorque @1300rpm ... 156 Ib-ft(212Nm)(21.6kg-m)
(W/ACT). . . . . . 163Ib-ft
Coolingfan Suction
Compressionratio 16.2t01
Lubrication. . . . . . . . . . Pressure system w/full-flowfilterand cooler
Mainbearings 5
Aircleaner Dry
Electricalsystem 12volt
Alternator. . . . . . . . . . . . . . . . . . . 51amps w/cab, 35 amps regular
Torque Converter:
Singlestage, dual phase, overrunning
ter, stall torque ratio 2.78:1.
Reverser:
Modulated,full-powershift withmultiplewet-diskclutches. Reverser
operatingleverat leftofsteering wheel.
Transmission:
Manual shift with first and second speeds having sliding collar
engagement and third and fourth speeds engaged with cone-type
synchronizers.Single shiftlever,floormounted.
Forward
Travel Speeds:
With standard 17.5L-24
rear and 11L-15
front tires
With MFWD and 19.5L-24
(required) rear and 12.00-
16.5 front tires
Gear mph (km/h)
1 3.1 5.0
2 5.3 8.5
3 11.4 18.3
4 20.8 33.5
1 3.3 5.3
2 5.7 9.2
3 12.2 19.6
4 22.3 35.9
FinalDrives Planetary,inboard
Service Brakes:
Hydraulic, applied with separate pedals; hydraulicallyequalized
when both pedals are depressed. Wet disks and facings are fully en-
closed and self-adjusting.
Secondary Brake. . . . . . . . . . . . . . . . . . . . Mechanical "V" groove
Steering: Hydrostatic power
Steering axle, regular:
Turningradius (brakeapplied) . . . . . . . . . . . . . 10ft. 3 in. (3.12 m)
Clearancecircle (brake applied) 29 ft. 6 in. (9.00 m)
Steering wheel turns, left to right 2.9
Axleoscillationstoptostop 22deg.
Mechanical front-wheeldrive (engaged):
Turning radius (brake applied) . ...........12 ft. 10 in. (3.91 m)
Clearance circle (brake applied) 30 ft. 6 in. (9.30m)
Steering wheel turns, left to right 3.2
Axleoscillationstoptostop 22deg.
Hydraulic System: Closed-center
(variableflow, constant pressure)
Pressure.. ........ .. . ... .2500 psi (17 238 kPa) (175.8 kg/cm2)
Pump 8radialpistons,variableflow
Flow @2200psi
(15170kPa)(154.7kg/cm2) 30gpm(1.89Us)
Filter,returnoil. . . . . . . . . . . . . . . . . . . . . 10 micron,steel-enclosed
Screen, pressure oil 50/in. (20/cm)mesh
band located on differential ring gear
righttoleft 3.9
righttoleft 4.2
20 percent torque rise
(221 Nm) (22.5 kg-m)
25 percent torque rise
stator, 11-in. (280 mm)diame-
Reverse
mph (km/h)
3.6 5.8
6.2 10.0
13.2 21.2
24.1 38.8
3.9 6.3
6.6 10.6
14.2 22.8
25.9 41.7
replaceable element
Hydraulic Cylinders:
Loaderboom (2). . . . . . ..
Loaderbucket (1) . . . . . ..
Backhoeboom(1) ......
Backhoecrowd(1) . . . . ..
Backhoebucket(1) .....
Backhoeswing(2) ......
Backhoe extendable
Bore
3.25 in. 30.0 in. 1.75 in.
(83 mm) (762 mm)
3.5 in.
(89mm) (620mm)
4.5 in. 38.5 in.
(114mm)
4.0 in. 33.0in. 2.0 in.
(102mm) (840mm)
3.5in. 27.4in. 2.25in.
(89mm)
4.0 in. 9.5 in. 2.0 in.
(102 mm)
dipper(1) 2.5 in.
(64mm)
Backhoestabilizers (2) . . . 4.0 in.
Steering (1) regular axle. . 2.0 in.
(102 mm)
(51 mm)
Steering (1) MFWD 2.0 in.
Tires:
(51 mm)
. Front
12.5L-15,8 PR, 11
11L-15,10PR, F3
MFWD . . . . . . . . . . 12.00-16.5,8 PR, R4
11L-16,12PR, F3
Wheel Treads:
Front 69in.(1750mm)
Rear 64in.(1625mm)
MFWD-Front 68in.(1727mm)
-Rear 66in.(1675mm)
Wheelbase 82.7in.(2100mm)
MFWD 83.3in.(2116mm)
Axle Ratings:
Front. .. . .. . .
Rear .
Static Rating Dynamic Rating
56,000 lb. 56,000 lb.
(25 450 kg) (25450 kg)
51,000 lb. 68,000 lb.
(23180 kg) (30900 kg)
Capacities: U.S.
Fueltank 23gal.
Enginecoolant 17qt.
Engineoilincludingfilter 9qt.
Torque converter and
reverser system 14qt.
Transaxleand hydraulic system. . . . . . . . . . . . 19gal.
Additional Standard Equipment:
Air precleaner
Air cleaner, dry type w/safety
element
Alternator, 35 amp w/transistorized
voltage regulator
Antifreeze to -34°F (-37°C)
Backhoe transport lock
Cast-in-counterweight front axle
Differential lock, foot-engaged collar
Electric automatic destroke for
hydraulic pump
Electric combination tachometer/
hourmeter
Electric shutoff on diesel injection
pump
Emergency/parking brake
Engine sideshields w/built-in locks
Foot and hand throttles
Fuel tank contaminant sump
w/easy access drain
Gauges for:
Engine coolant temperature
Fuel tank level
Hydraulic/transmission oil
temperature
Horn
Hydraulic lockouts for stabilizer -
raise and lower
Indicator lights:
Alternator
Engine oil pressure
Parking brake
Turn signals
SAE Operating Weight. . . . . . . . . . . . . . . . . . 14,400 lb. (6545 kg)
Stroke Rod
24.4 in. 1.75in.
(45mm)
(45mm)
2.25in.
(980mm) (57mm)
(51mm)
(695mm)
(57mm)
(241mm) (51mm)
48 in.
(1220mm)
20.3 in.
(515 mm)
9.5 in.
(241 mm)
12.6 in.
(320 mm)
16.9-24,8 PR,R4
17.5L-24,10PR,R4
19.5L-24,10 PR,R4
19.5L-24,10 PR,R4
Lights:
Halogen driving lights
Halogen work lights
Turn signal lights
Tail and brake lights
Flashing hazard lights
Loader bucket automatic
hydraulic self-leveling
Loader bucket level indicator
Muffler, underhood w/vertical
exhaust
Multiple-fuse protected electrical
system
Oil-to-air cooler for hydraulic
system and transaxle
Oil-to-air cooler for torque
converter and reverser
Operator's platform floormat
Operator's canopy or cab
headliner
Pushbutton start switch
Rear fenders
Rear reflectors
Restriction indicator for engine
air cleaner
ROPS/FOPS with roof and
seat belt
Steps and handholds
Tinted tempered safety glass
windows
1.25 in.
(32mm)
2.0 in.
(51 mm)
1.0 in.
(25.5mm)
1.0 in.
(25mm)
Rear
SAE J43
9,000lb.
(4080kg)
2,530lb.
(5680kg)
Liters
8.5
87
16
13
72
61