John Deere 25 Parts Catalog
W8468 -UN-01JAN94
A10
25 COMBINE HEADER TRANSPORT FRAME
JOHN DEERE 25 COMBINE HEADER TRANSPORT FRAME
(MANUFACTURED 1981-1985)
(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)
25 COMBINE HEADER TRANSPORT FRAME PC1868 (13-JAN-89) 1
PN=1
A11
25 COMBINE HEADER TRANSPORT FRAME
SERIAL NUMBERS
WHEN WRITING ABOUT OR FILLING OUT WARRANTY CLAIMS, USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON
THE SERIAL NUMBER PLATE.
SERIAL NUMBER PLATE
1501
1501 - DESIGNATES TRANSPORT FRAME SERIAL NUMBER
THE TRANSPORT FRAME SERIAL NUMBER PLATE IS LOCATED ON THE FRONT CROSS BEAM OF FRAME.
SERIAL NUMBER LISTING INFORMATION
SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE:
- THE PART CAN BE USED ON ALL MACHINES.
000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED.
-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER
LISTED.
000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS
LISTED.
WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE
EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.
2 25 COMBINE HEADER TRANSPORT FRAME PC1868 (24-FEB-82)
PN=2
A12
25 COMBINE HEADER TRANSPORT FRAME
IMPORTANT
THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE 25 COMBINE HEADER TRANSPORT
FRAME. VINTAGE IS DETERMINED BY SERIAL NUMBERS UNDER WHICH FRAMES WERE MANUFACTURED. IT
IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.
DIRECTION ARROW
ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.
BOX-ENCLOSED ILLUSTRATIONS
A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.
KITS
KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.
THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER
PARTS SHOWN IN PHANTOM FOR RELATIONSHIP.
BOLT AND CAP SCREW STRENGTH IDENTIFICATION
BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE
IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP
SCREWS ARE SAE GRADE 5 OR LOWER.
COMPLETE GOODS LISTINGS
COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON
REPLACEMENT PARTS ORDER.
SI UNITS OF MEASURE
METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.
CHANGE INDICATOR LINE
CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND
MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME
PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.
25 COMBINE HEADER TRANSPORT FRAME PC1868 (24-FEB-82) 3
PN=3
25 COMBINE HEADER TRANSPORT FRAME
ALPHABETICAL INDEX
GRID PAGE GRID PAGE
D
F8 DECALS ................................................................................ 10
E
F7 EMBLEM, SLOW MOVING VEHICLE .................................. 9
F
F2 FRAME .................................................................................. 6
H
F6 HITCH .................................................................................... 8
K
F8 KIT, DECAL .......................................................................... 10
L
F4 LIGHT BAR,TRAILER (FRANCE) ........................................ 7A
F4 LIGHTS AND REFLECTORS (FRANCE) ............................ 7A
R
F4 REFLECTORS AND LIGHTS (FRANCE) ............................ 7A
W
F4 WIRING HARNESS BRACKETS (FRANCE) ........................ 7A
F4 WIRING HARNESS, LIGHTS AND REFLECTORS
FRANCE) .......................................................................... 7A
4 25 COMBINE HEADER TRANSPORT FRAME PC1868 (12-AUG-97)
PN=4
Loading...