Jetway Computer NC9MGL User Manual

TECHNICAL MANUAL

Intel Pine Trail D & NM10 Chipset

Based

Mini-ITX M/B for ATOM Processor

NO. G03-NC9M-F

Revision: 1.0

Release date: February, 2012

Trademark:

* Specifications and Information contained in this docume ntation ar e furnishe d for inf ormation use only , and ar e

subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Environmental Protection Announcement

Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.

ENVIRONMENTAL SAFETY INSTRUCTION...........................................................................iii

USER’S NOTICE .......................................................................................................................iv

MANUAL REVISION INFORMATION.......................................................................................iv

ITEM CHECKLIST.....................................................................................................................iv

CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD................................................................................1

1-2 SPECIFICATION.........................................................................................................2

1-3 LAYOUT DIAGRAM....................................................................................................3

CHAPTER 2 HARDWARE INSTALLATION

2-1 JUMPER SETTING.....................................................................................................8

2-2 CONNECTORS AND HEADERS................................................................................11

2-2-1 CONNECTORS .............................................................................................11

2-2-2 HEADERS .....................................................................................................13

TABLE OF CONTENT

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERNING SETUP...................................................................................................21

3-2 GETTING HELP ..........................................................................................................21

3-3 THE MAIN MENU........................................................................................................21

3-4 STANDARD BIOS FEATURES ..................................................................................23

3-5 ADVANCED BIOS FEATURES..................................................................................25

3-5-1 CPU FEATURE...............................................................................................27

3-6 ADVANCED CHIPSET FEATURES...........................................................................27

3-7 INTEGRATED PHERIPHRALS ..................................................................................29

3-7-1 ONBOARD SATA FUNCTION ........................................................................30

3-7-2 ONBOARD DEVICE FUNCTION.....................................................................31

3-7-3 ONBOARD SUPER IO FUNCTION.................................................................32

3-8 POWER MANAGEMENT SETUP...............................................................................33

3-9 PNP/PCI CONFIGURATIONS.....................................................................................35

3-10 PC HEALTH STATUS.................................................................................................35

3-11 MISCELLANEOUS CONTROL...................................................................................37

3-12 PASSWORD SETTING...............................................................................................38

3-13 LOAD OPTIMIZED /STANDARDDEFAULTS ............................................................39

3-14 SAVE AND EXIT SETUP/EXIT WITHOUT SAVING ...................................................39

Environmental Safety Instruction

z Avoid the dusty, humidity and temperature extremes. Do not place the product in

any area where it may become wet.

z 0 to 60 centigrade is the suitable temperature. (The figure comes from the request

of the main chipset)

z Generally speaking, dramatic changes in temperature may lead to contact

malfunction and crackles due to constant thermal expansion and contraction from the welding spots’ that connect components and PCB. Computer should go through an adaptive phase before it boots when it is moved from a cold environment to a warmer one to avoid condensation phenomenon. These water drops attached on PCB or the surface of the components can bring about phenomena as minor as computer instability resulted from corrosion and oxidation from components and PCB or as major as short circuit that can burn the components. Suggest starting the computer until the temperature goes up.

z The increasing temperature of the capacitor may decrease the life of computer.

Using the close case may decrease the life of other device because the higher temperature in the inner of the case.

z Attention to the heat sink when you over-clocking. The higher temperature may

decrease the life of the device and burned the capacitor.

iii

USER’S NOTICE

COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AN D WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.

Manual Revision Information

Reversion Revision History Date

1.0 First Edition February, 2012

Item Checklist

Motherboard

User’s Manual

DVD for motherboard utilities

Cable(s)

I/O Back panel shield

Chapter 1

Introduction of the Motherboard

1-1 Feature of Motherboard

Intel Pine Trail-D and NM10 chipset, with low power consumption never denies

high performance

Support two DDRIII SODIMM 800 MHz up to 4GB

Support 2 * Serial ATAII (3Gb/s) Devices

Onboard dual Realtek RTL 8111EVL Gigabit Ethernet LAN chip

Integrated ALC662 6-channel HD audio CODEC

Support USB 2.0 data transport demands

Support RS232/422/485

Support PCI slot and Mini-PCIE slot

Support CPU Smart FAN

Supports ACPI S3 Function

Support Watchdog function

1-2 Specification

Spec Description

Mini-ITX form factor; PCB size: 17.0x17.0cm

Design Chipset

Embedded CPU

Memory Socket

Expansion Slot

Dual LAN Chip

Audio Chip

BIOS Multi I/O

Intel® NM10 Express chipset

Intel Atom CPU

DDRIII SODIMM slot x2

Support two DDRIII 800 MHz SO-DIMM with memory

capacity expandable to 4GB

32-bit PCI slot x 1

Mini-PCIE slot x1

Integrated with two Realtek RTL8111EVL PCI-E Gigabit

LAN chips

Support Fast Ethernet LAN function of providing

10/100/1000Mbps Ethernet data transfer rate

Realtek ALC662 6-channel Audio Codec integrated

Audio driver and utility included

AMI 8MB DIP Flash ROM

PS/2 keyboard port x1

PS/2 mouse port x1

Parallel port x1

Serial port x1

VGA port x1

RJ-45 LAN connector x2

USB 2.0 port x4

Audio connector x3 (Line-in, Line-out, MIC)

SATAII x2

Serial port header x5

RS422/RS485 header x1

4-pin USB 2.0 header x1

9-pin USB 2.0 header x1

LVDS header x1 and LVDS inverter x1

GPIO header x1

Front panel audio header x1

Speaker header x1

HDMI_SPDIF header x1

UL1_LED header x1

UL2_LED header x1

PWRLED header x1

Front panel header x1

1-3 Layout Diagram

Rear IO Diagram

Parallel Port

RJ-45 LAN Ports

PS/2

Mouse Port

PS/2

Keyboard Port

COM Port

VGA Port

Line-IN

Line-OUT

MIC-IN

USB 2.0 Ports

Motherboard Internal Diagram

PS/2 Mouse over

PS/2 Keyboard Port

SYSFAN1 Heade

DDRIII SODIMM2 Slot

Parallel Port over

COM Port &

VGA Port

RJ-45 Port over

USB Ports

RJ-45 Port over

USB Ports

Audio Connec

UL2 LED Header

Front Panel

Audio Header

UL1 LED Header

YSFAN2 Header

HDMI_SPDIF

Header

Mini-PCIE Slot

TX-RX COM

Heade

ATX PowerConnecto

LVDS Inverte

LVDS Heade

PCI slot

DDRIII SODIMM1 Slo

Intel CPU

Intel NM 10 Chipset

GPIO Heade

Front Panel

Heade

CPUFAN Heade

SATAII Ports

Serial Ports

USB Headers

Speaker Header

PWRLED Header

Motherboard Jumper Position

JP5

JBAT

JP4

JP6

JP3

Jumper

Jumper Name Description

JBAT CMOS RAM Clear Function Setting 3-pin Block JP1 Inverter12V/5V Select 3-pin Block JP2 LVDS PVCC 5V/3.3V Select 3-pin Block JP3 COM2 Header RS232 Power Select 6-pin Block JP4 COM2 Header RS232/485 /422Function Select 6-pin Block JP5 KB/MS Power On Function Setting 3-pin Block JP6 MINIPCIE Power SB 3.3V/3.3V Select 3-pin Block

Connectors

Connector Name Description

ATXPWR ATX Power Connector 24-pin Block KB(from KBMS) PS2 Keyboard Connector 6-pin Female MS(from KBMS) PS2 Mouse Connector 6-pin Female COM1 Serial Port Connector 9-pin Connector VGA Video Graphic Attach Connector 15-pin Connector PARALLEL1 Parallel Port Connector 25-pin Connector LAN (from UL1/UL2) RJ-45 LAN Connector 8-pin Connector USB (from UL1/UL2) USB 2.0 Port 4-pin Connector AUDIO Line Out /Line In /MIC Audio

Connector

SATA1/SATA2 Serial ATAII Connectors 7-pin Connector

3-phone Jack

Headers

Header Name Description

FP_AUDIO Front panel audio Header 9-pin Block COM2/COM3/

COM4/COM5/COM6 TX-RXCOM RS422/485 port header 4-pin Block USB2 USB 2.0 Header 9-pin Block USB3 USB 2.0 Header 4-pin Block SPEAK Speaker Header 4-pin Block PWRLED Power LED 3-pin Block JW_FP

Serial Port Header 9-pin Block

Front Panel Header(PWR LED/

HD LED/ /Power Button /Reset)

9-pin Block

CPUFAN1/SYSFAN1/ SYSFAN2

HDMI_SPDIF SPDIF Out header 2-pin block UL1_LED/UL2_LED LAN 1/2 ACT LED header 2-pin block GPIO GPIO Header 10-pin Block INVERTER LVDS Inverter Connector 7-pin Block LVDS LVDS Header 35-pin Block

FAN Speed Headers 3-pin Block

Chapter 2

Hardware Installation

2-1 Jumper Setting

(1) JBAT (3-pin): Clear CMOS Function Setting

1-2 closed: Normal;

(2) JP1 (3-pin): Inverter VCC 12V/5V select

1-2 Cl o sed: Inverter 12V Select ;

JBATJBAT

2-3 closed : Clear CMOS

JP1 JP1

2-3 Cl os ed : Inverter 5V Select

(3) JP2 (3-pin): LVDS PVCC 5V/3.3V Select

1-2 Closed: LVDS VCC= 5V;

(4) JP3 (6-pin): COM2 Header RS232 Power Select

JP3

1-2 Closed: RS232;

3-4 Closed : +12V;

JP2 JP2

1 3

2-3 Cosed : LVDS VCC=3.3V

5-6 Closed : +5V

+ 31 hidden pages