Jensen JiTS-300i User Manual

®

DOCKING DIGITAL MUSIC SYSTEM FOR iPod AND iPhone

USER MANUAL

JiTS-300i

(iPhone/iPod Not Included)

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

1

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of your
musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level.
One that lets the sound come through loud and clear without annoying blaring or distortion and,
most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association's Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its back cover. You should note the serial number
of this unit in the space provided as a permanent record of your purchase to aid in identification
in the event of theft of loss.

Model Number: JiTS-300i Serial Number: ____________________

2

WARNINGS

WARNING

:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified
may result in hazardous radiation exposure.

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these Instructions.

2) Keep these Instructions.

3) Heed all Warnings.

4) Follow all Instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

3

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. Minimum distances 2 cm around the apparatus for sufficient ventilation. The

ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9) No naked flame sources, such as lighted candles, should be placed on the apparatus.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

11) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

12) Only use attachments/accessories specified by the manufacturer.

13) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

14) Unplug this apparatus during lightning storms or when unused for long

periods of time.

15) Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.

16) The apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on apparatus.

17) Main plug is used as disconnect device and it should remain readily operable during intended

use. In order to disconnect the apparatus from the mains completely, the mains plug should be
disconnected form the mains socket outlet completely.

18) Caution mark and name plate are located at the back of apparatus.

19) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

20) CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.

SAVE THESE INSTRUCTIONS

4

IMPORTANT NOTES

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

• Places subject to constant vibration.

• Dusty, humid or moist places.

Protect Your Furniture

This product is equipped with non-skid rubber 'feet' to prevent the product from moving
when you operate the controls. These 'feet' are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on your furniture. However
certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may
cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To
prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the
product on fine wooden furniture.

5

LOCATION OF CONTROLS

MAIN UNIT

10

11

12
13

14

15
16

17

1
3

4

2

5

7

9

6
8

1. VOLUME - BUTTON

2. VOLUME + BUTTON

3. POWER

ON/STANDBY BUTTON

4. PLAY/PAUSE

BUTTON

5. iPod/iPhone DOCKING

6. SKIP FORWARD  /TUNING+ BUTTON

7. SKIP BACK  /TUNING- BUTTON

8. SOURCE BUTTON

9. LCD DISPLAY

10. REMOTE INFRARED SENSOR

11. A/V INPUT JACKS

12. COMPONENT VIDEO OUTPUT JACKS

13. LINE IN JACK

14. SUBWOOFER OUTPUT JACK

15. COMPOSITE VIDEO OUTPUT JACK

16. RESET BUTTON

17. AC POWER CORD