Manual for AL500AC and AL100AC
version 1.0 - June 2015 - © JensenScandinavia AS
USB cradle usage/ placement
Download driver
Installation of driver in Windows 7 / 8
Installation of driver in Windows 10
Installation of driver in Mac OS X
Installation of driver in Linux
Connect to a wireless network using Windows 7
Connect to a wireless network using Windows 8
Connect to a wireless network using Windows 10
Connect to a wireless network using Mac OS X
Uninstallation of driver in Windows
Uninstallation of driver in Mac OS X
How do I find which driverversion is installed?
.......................................................2
.........................................................................2
................................................3
...................................................4
......................................................5
...................................................................6
....................................7
...................................8
..................................9
....................................10
........................................................11
......................................................12
.......................................13
This manual will help you installing, uninstalling and how to connect to a wireless
network using different operating systems (OS).
.............
.........
USB cradle usage / placement
In the giftbox you will find a USB cradle/adapter.
To get the best signal/connection you can use the USB cradle. This will allow you to place the
AL100ac/AL500ac a place where signal receiption is better.
Download driver
On our website you will find the latestwww.jensenscandinavia.com/downloads
driver available for AL100ac/AL500ac.
We recommend that you always download the newest driver before installing
AL100ac/500ac on your system.
The driverfiles are in zip format and need to be unzipped before you can install it.
In Windows unzipping a file is done by running the file and then select «unzip files»,
then select where you want to unzip the files to (e. g. desktop) and click unzip.
In Mac OS X zip files are unzipped automatically by just running the file.
There will be a new folder in the same folder as the zip file containing the unzipped files.
Page 2
Installasion of driver in Windows 7 / 8
Important! Do not connect the AL100ac/AL500ac until the driver is fully installed.
* If you have downloaded driver from our webpage you can run the setup.exe from within the folder
you unzipped the driver to.
Insert the AL100ac/AL500ac CD now
If the installation is not starting automatically please run the setup.exe file manually.
You will find the setup.exe file by click My computer and select CD (usually D:)
Click Next and wait for the setup to start
Select «Install this driver software anyway»
Windows now needs a restart
Select «Yes, I want to restart my computer now»
Driveren til AL500/AL100AC er nå ferdig installert.
Når Windows har startet opp igjen kan du koble AL100AC/AL500AC til en ledig USB port.
Enheten vil da bli installert automatisk i Windows og er klar til bruk etter normalt ca. 30 sekunder.
Se sidene «Hvordan koble til trådløst i .......» for hvordan du kobler til trådløst nettverk med ditt
operativsystem.
Page 3
Driver installation in Windows 10
The diver for Air:Link 100AC and 500AC are built-in to Windows, so it will be automatically installed
when you inisert to the computer the first time.
Page 4
Installation of driver in Mac OS X
Important! Do not connect the AL100AC/AL500AC before the driver is installed.
Insert the driver CD, open Finder and go to the folder Mac -> OS X and open the folder
for your OS X version
* If you have downloaded the driver please run the file installer.pkg to start the installation.
Double click on the file Installer.pkg to start
the installation.
Click Continue and then Continue again.
Click Continue and then Agree
Click Install.
Enter the system password for your mac
and then click Continue Installation.
When the driver is fully installed click Restart
This will initiate a reboot of your mac computer.
When the computer have startet again you can
insert the AL100AC/AL500AC to your computer.
Page 5
Installation of driver in Linux
1. Download the latest Linux driver from www.jensenscandinavia.com/downloads
2. Copy the driver to your local folder.
3. Open console
4. Unzip the driver
5. Enter (and click enter)make
sudo apt-get install build-essential6. Enter (and click enter)
7. If you have the Air:Link 500ac - enter (and click Enter)sudo modprobe 8812au
If you have the Air:Link 100ac - enter sudo modprobe 8821au (and click Enter)
The driver should now be installed and your AL100AC / 500AC is ready for use.
Page 6
Connect to a wireless network using Windows 7
1
253
4
6
2
1. Click the icon for wireless network on the system tray
2 You will now see a list of available wireless networks in your area.
Select your wireless network from the list.
The name of your AirLink router can be found under the router.
3. Please enter the encryption key for your wireless network and click OK.
The encryption key can be found on top or under the router.
The key is usually 8 digit with a mix of lower / upper case letters and numbers.
4. Select the placement of your network; Home, work or public places
5. Click Close.
6. The PC is now connected to the wireless network. The icon for wireless has
now changed to white to indicate that the connection is working.
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 7.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
Page 7
Connect to a wireless network using Windows 8
1
Nettverk
AirLink0F3EB6
á
Nettverk
AirLink0F3EB6
Koble til automatisk
Wi-Fi
Koble til
Flymodus
Av
2
Neste Avbryt
••••••••
Angi sikkerhetsnøkkelen for nettverket
23
Nettverk
AirLink0F3EB6
Wi-Fi
Flymodus
Av
Tilkoblet
5
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Nettverk
AirLink0F3EB6
á
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Vil du aktivere deling mellom Pcer og
koblet til enheter i dette nettverket?
Ja, aktiver deling og koble til
enheter
For hjemme- eller jobbnetverk
4
1. Click the icon for wireless network on the system tray
2. You will now see a list of available wireless networks in your area.
Select your wireless network from the list and click Connect.
The name of your router can be found under your router.
3. Please enter the encryption key for your Jensen router and click Next.
The encryption key can be found on top or under the router.
The key is 8 digit with a mix of lower / upper case letters and numbers.
4. Please select if you wish to activate sharing of files between devices
in your network.
5.The PC is now connected to the wireless network.
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 8.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
Page 8
Connect to a wireless network using Windows 10
1
253
4
2
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 8.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
1. Click the icon for wireless network on the system tray and then
Network setings
2. You will now see a list of available wireless networks in your area.
Select your wireless network from the list and click Connect.
The name of your router can be found under your router.
3. Please enter the encryption key for your Jensen router and click Next.
The encryption key can be found on top or under the router.
The key is 8 digit with a mix of lower / upper case letters and numbers.
4. Please select if you wish to activate sharing of files between devices
in your network.
5.The PC is now connected to the wireless network.
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
Page 9
Connect to a wireless network using Mac OS X
1) Click the icon for the Wireless-AC Utility.
2) Select your wireless network and click Connect.
3) Enter the password of the wireless
network, then re-type the password
and then click OK.
4) Click Link Status to see the status
of the connection.
When the AL100ac/500ac is connected
the status page will look like the above
picture.
Page 10
Uninstallation of driver in Windows
If you need to upgrade the driver for AL100AC/AL500AC we recommend that you first uninstall (*)
the current driver.
*) In the below instructions we are showing AL500ac as an example.
The procedure for AL100ac is the same.
1. Download the latest driver for AL100AC/AL500AC from www.jensenscandinavia.com/downloads
2. Unzip the downloaded file to the folder C:\AL500AC (or another if you like)
3. Click the Windows key + R and enter CMD (and click Enter)
4. Enter CD\ (and click Enter)
5. Enter CD AL500AC (and click enter) *
* If you have selected to unzip to a different folder you have to navigate to the folder instead.
6. Enter setup -uninst (and click Enter)
7. Click Yes
8. Click Finish.
The driver have now been removed from your Windows system, and you can now install the new
driver by running the setup.exe file that are within the driver folder (c:\AL500AC)
Page 11
Uninstalling of the driver in Mac OS X
If you want to re-install the driver we recommend that you first uninstall the driver.
1) Insert the CD (or go into the folder of the downloaded driver) and open the folder for your
OS X version.
2) Run the file Uninstall.command
3) Enter the password for your OS X system (System password) and click Enter.
The driver for AL100AC/500AC will now be uninstalled.
Page 12
How do I find which driverversion is installed?
In Windows device manager you can find the version of the driver installed on your computer.
If you want to upgrade the driver you can compare this version to the one available on
our WEB page www.jensenscandinavia.com/downloads
Click Control panel -> System ->
Device manager.
Open the Network card tab and
then select AirLink 100AC / AL500AC
Click the Driver tab.
Here you will see which driver version
that are currently installed.
Page 13
Loading...