How to Enjoy Your CH4001 AM/FM
Stereo Receiver with Compact Disc
Player/Changer
POWER
SEL
Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to
look through it, you'll learn how to use all of the features on
your new Jensen car stereo for maximum enjoyment.
For your Jensen stereo to work right, it must be installed
correctly. The enclosed installation manual will show you how
to install your new stereo like a pro. It's a good idea to read
all of these instructions before you begin the installation.
Most installations are straightforward and can be handled by
a do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt with
the product.
M – F 8:00 am to 6:00 pm EST @ 1.800.323.0221
365 / 24 / 7 @ www.jensenaudio.com
5903_CH4001_OP.p6512/6/00, 4:36 PM1
Troubleshooting .....................7
Specifications ........................7
Warranty .................................8
®
Basic
CH4001
POWER
SEL
®
DISC
BAND
CH4001
ST
MO ATP LOUD
TUNE/TRACK
4-CD CHANGER RECEIVER
On/Off
Press POWER button to turn the
CH4001 on. Press POWER again to turn it off.
Volume
Adjust volume by pressing or .
Bass
1. Press SEL button one time.
2. Adjust Bass level using
buttons.
BAS +7 = maximum
BAS –7 = minimum
or
D
–
1
AMFMII
DISC
4x40WATTS HIGH POWER
INSTALOC III TUNER
D
+
2
DX
TRACK
Balance
1. Press SEL button three times.
2. Adjust sound balance left and right using
or buttons.
Rch:+9 = right speakers only
Lch:+9 = left speakers only
Fader
1. Press SEL button four times.
2. Adjust sound balance front and rear
using
FAD:R: 9 = front speakers only
FAD:F: 9 = rear speakers only
RDM
INT
RPT
DISC
INT
RDM
43
or buttons.
CHANGER
CD
COMPACT
DIGITAL AUDIO
5
RPT
LOUD
DISP
6
OPEN
ATP
LO/DX
T reble
1. Press SEL button two times.
2. Adjust Treble level using
buttons.
TRE + 7 = maximum
TRE – 7 = minimum
2
5903_CH4001_OP.p6512/6/00, 4:36 PM2
Bass Boost
Press LOUD button to increase bass output.
LOUD appears in the display. Press again to
deactivate Bass Boost.
or
CH4001
®
Mute
Press POWER button for more than three
seconds. Volume output is muted by 20db and
the volume display flashes. Press any button
(except
/
) to resume listening.
Radio
POWER
SEL
®
CH4001
ST MO ATP LOUD DX
BAND
TUNE/TRACK
4-CD CHANGER RECEIVER
Set the Clock
Press DISP and button to change hours.
Press DISP and
4x40WATTS HIGH POWER
II
INSTALOC III TUNER
D
+
2
RDM RPTINT
AMFM
DISC
D
–
1
button to change minutes.
CD
COMPACT
5
RPT
OPEN
ATP
LOUD
DISP
6
RDM
CHANGER
DIGITAL AUDIO
INT
43
DISC
LO/DX
Radio/CD Function
Press BAND button to activate radio function.
Press CD to activate CD Player/Changer
function.
Select a Radio Band
Press BAND button to change radio between
two FM bands and one AM band.
5903_CH4001_OP.p6512/6/00, 4:36 PM3
Local / Distant Stations
Press LOUD/LODX button for more than three
seconds to choose distant stations. DX
appears in the display.
Using the distance setting reduces
interference from nearby stations.
Press LOUD/LODX button again for more than
three seconds to choose local stations.
3
®
CH4001
Select a Radio Station
Use or button to change station.
Options for selecting a station
Manual
Press a or button for more than one
second to move radio frequency number up
or down one step.
Seek
Press a or button for less than one
second to seek to the next strong station.
Preset Stations
Six numbered preset buttons store and recall
stations for each band.
Store a station:
1. Select a band.
2. Select a station.
Automatically Store Tra vel
Stations
Select and store six strong stations in
selected band.
Store Tra vel Stations:
1. Select a band.
2. Press ATP button for more than three
seconds. The display flashes "– – – –"
while storing stations.
Recall Tra vel Stations:
1. Select a band.
2. Press ATP button for less than three
seconds.
3. Press a preset button for three seconds.
Preset number appears in the display.
Recall a station:
1. Select band.
2. Press a preset button to select stored
station.
4
5903_CH4001_OP.p6512/6/00, 4:36 PM4
CH4001
®
CD Player/Changer
POWER
SEL
DISC
BAND
®
ST
CH4001
CD/Radio Function
Press CD to activate CD Player/Changer
function.
Press BAND or
/
buttons to activate radio
function while CD is playing.
Eject Magazine from the CD
Player/Changer
1. Press OPEN. Faceplate will flip down.
2. Press
slot.
3. Flip panel up to close.
(eject) to eject magazine from
MO ATP LOUD
TUNE/TRACK
4-CD CHANGER RECEIVER
DX
TRACK
COMPACT
5
OPEN
ATP
CD
RPT
LOUD
DISP
6
LO/DX
DISC
D
–
1
4x40WATTS HIGH POWER
INSTALOC III TUNER
D
+
2
RDM
II
AMFM
RPT
RDM
CHANGER
DIGITAL AUDIO
INT
43
INT
DISC
Insert Compact Discs into
Magazine
Insert a disc into the magazine with the label
side up. Do not insert more than one disc into
a slot. Inserting more than one disc into a
magazine slot could damage the compact
disc, the magazine and the compact disc
player/changer.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
COMPACT
X
X
X
X
DIGITAL AUDIO
5903_CH4001_OP.p6512/6/00, 4:36 PM5
To remove a disc from the magazine, pull out
the disc to be removed.
5
®
CH4001
Load Magazine into CD Player/
Changer
1. Press OPEN. Faceplate will flip down.
2. Insert magazine into the slot.
3. Flip panel up to close.
C
O
M
P
A
C
T
D
I
G
I
T
A
L
A
U
D
I
O
Note:
Always keep the faceplate closed during
operation.
The CD Player/Changer will begin playing the
first track on the first disc in the magazine.
Disc number, track number and elapsed time
appear in the display.
Pause CD
Press / to pause CD play. Press / again
to resume CD play.
Fast Forward and Fast Reverse
Press and hold or to fast forward or
fast reverse. CD play starts from when you
release the button.
Random: Play all Tracks
Press RDM to play all tracks on CD in random
order. RDM appears in the display. Press again
to stop random play.
Intro: Previe w all Tracks
Press INT to play first ten seconds of each
track on current CD. INT appears in the display.
Press again to stop intro and listen to track.
Repeat the Same Track
Disc Up or Down
Press D+ to move to the next disc.
Press D– to move to the previous disc.
Display shows current disc number.
Track Up or Down
Press or to advance to next track.
Display shows current track number.
6
5903_CH4001_OP.p6512/6/00, 4:36 PM6
Press RPT to continuously repeat same track.
RPT appears in the display. Press again to
stop repeat.
Note:
• Do not expose CD Player/Changer to
extremely high or low temperatures.
• Do not drive with ejected magazine in
the slot.
Specifications
CD Player
Signal/noise ratio .......................................................................................................................................... >86 dB
Frequency response .........................................................................................................................20 Hz - 20 kHz
Channel separation....................................................................................................................................... >65 dB
Total system power .......................................................................................................................... 160 watts peak
Power output..................................................................................................... front: 2 x 40W peak, 2 x 20W RMS
rear: 2 x 40W peak, 2 x 20W RMS
General
Power supply .............................................................................................................. 11-16 VDC, negative ground
Length of Warranty. This warranty from Recoton Mobile
Electronics shall be in effect for a period of one year from the date
of the first consumer purchase.
Persons Protected. This warranty will be enforceable by the
original owner and any subsequent owners during the warranty
period so long as proof of date of purchase from an authorized
Jensen dealer is presented whenever warranty service is required.
What is Covered. Except as otherwise specified below, this
warranty covers all defects in material and workmanship in this
product. The following are not covered: damage resulting from
accident, misuse, abuse, neglect, product modification, improper
installation, incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product; damage occurring
during shipment (claims must be presented to the carrier);
elimination of car static
or other electrical interferences; any product purchased outside
USA or Canada, or on which the serial number
has been defaced, modified or removed.
How You Can Get Service.
U.S. Purchasers. Please telephone Jensen at
1-800-323-4815. We will either inform you of the name
and address of an authorized Jensen repair station which will
service the product or will advise you to send the product to a
factory service center.
Canadian Purchasers. The product should be returned
to the Jensen dealer from whom it was purchased and
such dealer either will service or arrange for service of
the product.
If shipment of the product is required, it should be packed securely.
The original dated bill of sale must always be included with the
product as proof of warranty coverage.
What We Will Pay For. We will pay for all labor and material
expenses required to repair the product, but you must pay any
labor costs for the removal and/or installation of the product. If the
product is shipped for warranty service, you must prepay the initial
shipping charges, but Jensen will pay the return shipping charges
if the product is returned to an address inside the USA or Canada.
Exclusion of Certain Damages. Jensen’s liability is limited to the
repair or replacement, at our option, of any defective product and
shall not include incidental or consequential economic damages of
any kind.
Some states and/or provinces do not allow limitations on how long
an implied warranty lasts and/or do not allow the exclusion or
limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province.
®
®
COMPANY
5903_CH4001_OP.p6512/6/00, 4:36 PM7
5903_CH4001_OP.p6512/6/00, 4:36 PM8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.