®
Operation
How to Enjoy Your CD510K AM/FM
Stereo Receiver/CD Player with Optional
CD Changer Control and Detachable
Flip-Over Security Panel
PWR
M
O
BND
5V
D
PREOUT
T
E
F
I
H
S
COMPACT
A
.
P
S
DIGITAL AUDIO
S
E
L
L
O
U
T
N
P
C
R
S
2
1
Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to
look through it, you'll learn how to use all of the features on
your new Jensen car stereo for maximum enjoyment.
For your Jensen stereo to work right, it must be installed
correctly. The enclosed installation manual will show you how
to install your new stereo like a pro. It's a good idea to read
all of these instructions before you begin the installation.
Most installations are straightforward and can be handled by
a do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt with
the product.
®
MONO
LOC
S.W
4 X 50 CDC CONTROLLER
M
D
R
3
4
5
P
LOUD
G
INSTALOC II TUNER
+
C
D
C
0
CH
+
M
E
M
M
6
7
R
L
C
CD510K
8
REL
DISP
T
E
9
10
CD510K Features
Basic Operation ......................... 2
On/Off ............................................ 2
Select Function .............................. 2
Volume ........................................... 3
Bass ...............................................3
Treble .............................................3
Balance ..........................................4
Fader..............................................4
Sub (subwoofer) ............................ 5
Loudness ....................................... 5
View/Set the Clock ......................... 5
Mode ..............................................5
Radio Operation ......................... 6
Radio Mode....................................6
Select a Band ................................ 6
Select a Station .............................. 6
Preset Stations .............................. 7
Automatically Store Stations ..........7
Scan Stored Stations
(Preset Scan) .................................7
CD Player Operation ................. 8
CD Mode ........................................ 8
Insert and Eject CD ........................ 8
Skip Tracks .................................... 8
Fast Forward and Fast Reverse .... 8
Pause CD.......................................8
Scan (Preview all Tracks) .............. 9
Repeat the Same Track ................. 9
Random (Play all Tracks) ............... 9
Direct Track Access ....................... 9
Program CD Tracks ....................... 9
CD Changer Operation ........... 10
CDC Mode ................................... 10
Direct Disc Access ....................... 10
Direct Track Access ..................... 10
Skip Tracks .................................. 10
Pause CD Changer ...................... 10
Fast Forward and Fast Reverse .. 11
Scan (Preview all Tracks) ............ 11
Repeat the Same Track ............... 11
Random (Play all Tracks)............. 11
Specifications
and Warranty ............................. 12
Technical Assistance
For technical assistance with the operation of the CD510K,
call 1-800-323-0221.
®
Basic Operation
CD510K
On/Off
PWR
PWR
M
D
O
N
B
D
E
S
E
L
1
5V
PREOUT
T
IF
H
S
COMPACT
A
.P
S
DIGITAL AUDIO
L
O
U
T
N
P
C
R
S
2
®
MONO
4 X 50 CDC CONTROLLER
R
3
4
Press any button to turn the CD510K
on. Press PWR to turn it off.
INSTALOC II TUNER
LOC
LOUD
S.W
M
E
M
D
M
M
G
P
6
5
7
R
L
C
+
CDC
0
H
C
+
CD510K
8
9
REL
DISP
T
E
10
Select Function
1
>1 sec
2
(Subwoofer)
(Fader)
LOU
S.W
S
E
L
S
E
L
S
E
L
1. Press and hold
LOU button for
more than one
second to activate
Subwoofer.
(Volume)
VOL
S
E
L
S
E
L
S
E
L
(Bass)
(Treble)
(Balance)
2. Press SEL button to move display through
volume, bass, treble, balance, fader and
sub functions.
3
3. Use the volume knob
to adjust the selected
functions. When
function has not
been adjusted for 3 seconds, display
returns to normal radio or CD display.
Note: If the Sub (Subwoofer) is not activated, the
Sub (Subwoofer) function will not display. All other
functions will display in the order indicated.
2
CD510K
VOL
Volume
0= minimum volume
46= maximum volume
Bass
S
1. Press SEL button two times.
E
1
S
L
E
L
BAS appears in the display.
®
Treble
+–
Adjust volume
1
by turning
volume knob.
+
0
+
2
+
0
+
–6 = minimum treble
+6 = maximum treble
–0 = flat audio response
S
E
L
1. Press SEL button three
S
E
S
L
E
L
times. TRE appears in the
display.
+
0
+
+–
2. Adjust treble level
by turning volume
knob.
+
0
+
+–
2
2. Adjust bass level
+
+
–6 = minimum bass
+6 = maximum bass
–0 = flat audio response
by turning volume
knob.
0
3
®
CD510K
Balance
S
S
1
1. Press SEL button four times.
2. Adjust sound balance left and right by
2
E
E
S
L
L
E
S
L
E
L
turning volume knob.
RL
+
+
+
+
+
+
R12=Right
0
speaker only
C=Equal sound
0
right and left
L12=Left
0
speaker only
Fader
S
E
+
0
+
1
1. Press SEL button five times.
2. Adjust sound front and rear by turning
2
S
L
E
S
L
E
S
L
E
S
L
E
L
volume knob.
R
+
0
+
F
+
+
+
+
+
+
0
0
0
F12=Front
speakers only
C=Equal sound
front and rear
R12=Rear
speakers only
4
CD510K
®
Sub (Subwoofer)
S
S
1
E
E
S
L
L
E
S
L
E
S
L
E
S
L
E
L
1. Press SEL button
six times.
2
2. Use the volume
knob for gain
adjust.
+
0
minimum
+
+
0
maximum
+
Note: If the Sub (Subwoofer) is not activated,
the Sub (Subwoofer) function will not display.
Loudness
LO
U
Press LOU to increase bass output.
LOUD will appear in display. Press
LOU again to deactivate loudness.
View/Set the Clock
+
0
+
To view the time, press DISP button to
temporarily display clock.
To set the clock:
1. Press DISP button to display clock.
1
DISP
2. Press and hold DISP button for more than
two seconds. The colon will start blinking.
2
DISP
>2 sec
3. Within 3 sec-
3
PWR
M
O
M
H
D
E
S
E
L
1
onds, press
Tuning Ring
down to change
the hours and
up to change
N
SC
the minutes.
Mode
Press the MODE button to select Radio (TUN),
CD play (CD) or CD Changer (CDC) mode.
M
O
D
E
M
O
D
E
M
O
D
E
The MODE button only selects the CD mode if
a CD is inserted, and only selects the CDC
mode if a Jensen CD Changer is plugged in
and a CD is inserted.
5
®
Radio Operation
CD510K
Radio Mode
M
O
D
E
Press MODE button one time to
select Radio Mode (TUN).
Select a Band
BND
T
IF
H
S
PWR
M
O
BND
D
E
E
L
1
5V
PREOUT
SHIFT
COMPACT
A
.P
S
DIGITAL AUDIO
S
L
O
U
T
N
P
C
R
S
2
MONO
4 X 50 CDC CONTROLLER
3
Press BND button to
change radio between two FM bands
and one AM band.
Each band stores up
to ten preset stations.
®
LOC
LOUD
S.W
M
E
M
D
R
4
M
M
G
P
6
5
R
L
C
Select a Station
Options for selecting a station
PWR
or
PWR
or
INSTALOC II TUNER
C
7
<2 sec
+
0
H
+
CD510K
8
9
M
O
D
E
E
L
1
M
O
D
E
S
E
L
1
REL
DISP
T
E
0
1
the Tuning Ring
Press
up or down for less
than two seconds to
move radio frequency
S
number up or down
one step.
N
C
S
Press and Hold
Tuning Ring up or
down for more than
two seconds to seek
the next clear station.
N
C
S
the
>2 sec
6
CD510K
B
N
D
A.PS
S
H
IF
T
2
1
B
N
D
A.PS
S
H
I
F
T
2
1
®
Preset Stations
RPT
SCN
1
2
RDM4PGM
3
Ten numbered preset buttons store and recall
stations for each band.
Store a station:
1
2
or
IFT
H
S
PWR
M
O
D
E
S
E
L
N
C
S
1
D
N
B
3
RPT
SCN
1
2
RDM
3
4
Band
Recall a station:
BND
1
1. Select a band (if needed).
T
F
I
H
S
2.
Touch
than two seconds to select
stored station.
2
MEM
6
7
5
CLR
8
1. Select a band (if
needed).
2. Select a station.
Hold
3.
a preset button
for two seconds.
The preset station
number appears on
the display when
station is saved.
MEM
M
PG
6
7
8
5
CLR
9
>2 sec
+
0
H
C
+
Preset Station Number
a preset button for less
+
0
CH
+
Automatically Store Stations
ET
0
9
1
Select ten strong stations and store them in
current band.
1. Select a band (if needed).
Hold
2.
A.PS button for
more
than two seconds.
The ten new stations
replace stations already
>2 sec
stored in that band.
Scan Stored Stations
(Preset Scan)
ET
0
1
Scan stations stored in current band.
1. Select a band (if needed).
2.
Touch
A.PS for
two seconds. Radio pauses
for ten seconds at each
Touch
station.
A.PS again to
stop scanning when desired
<2 sec
station is reached.
less
than
M
E
T
N
P
C
R
S
1
2
M
D
R
3
4
M
M
G
P
6
5
R
L
C
8
7
T
E
9
10
<2 sec
7
®
CD Player Operation
CD510K
PWR
CD Mode
M
O
M
D
O
E
D
E
Press MODE button two times to
select CD Player Mode (CD).
Insert and Eject CD
Press REL button to open flip-over
REL
panel. Push a CD into slot. The CD will
begin to play. Flip panel up to close.
x
x
x
x
x
x
x
x
x
Insert CD
label side up
x
x
x
x
®
M
O
BND
D
E
S
E
L
1
5V
PREOUT
SHIFT
COMPACT
A
.P
S
DIGITAL AUDIO
L
O
U
N
C
S
T
P
R
2
4 X 50 CDC CONTROLLER
M
D
R
3
4
5
M
E
M
M
G
P
6
R
L
C
INSTALOC II TUNER
7
+
0
+
CD510K
8
9
REL
DISP
T
E
0
1
Skip Tracks
Press
the Tuning Ring
up or down to advance
to next track. Track
number appears for
less than 1 second
then the time remaining appears.
or
PWR
M
O
D
E
S
E
L
N
C
S
1
Fast Forward and Fast Reverse
Eject
button
x
x
x
x
x
x
x
x
x
(High speed audible search)
PWR
M
or
Press and Hold
Tuning Ring up or
O
down to fast forward or
D
E
fast reverse a track.
S
E
L
CD play resumes after
you release the ring.
N
C
S
1
the
+
0
+
Track number
Pause CD
During CD player operation, press
button to pause CD play. Press
again to resume play.
Press REL button to open flip-over
panel. Press
(EJECT) to stop CD
play and eject CD from slot. Flip
panel up to close.
8
CD510K
®
Scan (Preview all Tracks)
N
C
S
1
Press and hold the SCN button for
more than two seconds to play first
ten seconds of each track on current
>2 sec
CD. Press and hold the SCN button
for more than two seconds again to
stop intro and listen to track.
Repeat the Same Track
T
P
R
2
Press and hold the RPT button for
more than two seconds to continuously repeat same track. RPT
>2 sec
appears in the display. Press and
hold the RPT button for more than
two seconds again to stop repeat.
Random (Play all Tracks)
M
D
R
4
Press and hold the RDM button for
more than two seconds to play all
tracks on CD in random order one
>2 sec
time. Press and hold the RDM button
for more than two seconds again to
stop random play.
Direct Track Access
While a CD is playing or paused, press a
preset button for less than two seconds to
select the corresponding track number (1–10).
Program CD Tracks
Use Program function to select up to
M
G
P
5
24 CD tracks to play in any order.
Program works by allowing you to
select a track number for each spot in
the playing sequence. A CD must be
inserted to use Program.
1
2
3
Note: Direct access of tracks or discs cannot
be performed while in Program CD function.
or
PWR
M
E
M
6
2. Press MEM/CLR to enter
R
L
C
1. Press Tuning Ring
M
O
D
E
S
E
L
C
S
1
up or down to
choose track
number.
N
track number into
memory. Display shows
next track number in
sequence. Continue (up
M
G
P
5
to 24 times) for all desired
tracks.
3. Press PGM to play CD in
programmed order.
M
E
M
6
L
C
To clear memory, press and hold
R
MEM/CLR in PGM mode while
CD is playing.
RPT
SCN
1
2
RDM4PGM
3
MEM
6
7
5
CLR
8
ET
0
9
1
Note:
• Do not expose CD player to extremely
<2 sec
high or low temperatures.
• Do not drive with ejected CD in the slot.
9
®
CD510K
CD Changer Operation
PWR
M
D
O
N
B
D
E
S
E
L
1
5V
PREOUT
SHIFT
COMPACT
A
.P
S
DIGITAL AUDIO
L
O
U
SCN
RPT
2
4 X 50 CDC CONTROLLER
3
The CD510K is designed to control an optional
Jensen 6-disc CD changer.
CDC Mode
M
O
M
D
O
E
M
D
O
E
D
E
Press MODE button three times to
select CD Changer Mode (CDC).
Direct Disc Access
D
1
N
B
H
S
2
N
C
S
1
1. Press SHIFT (BND)
T
F
I
2
button.
T
P
R
R
3
4
5
R
L
C
M
E
M
M
M
D
G
P
6
®
RDM4PGM
5
INSTALOC II TUNER
+
CDC
0
+
EM
M
6
7
CLR
CD510K
8
REL
DISP
ET
9
10
Direct Track Access
While a CD is playing or paused, press a
preset button for less than two seconds to
select the corresponding track number (1–10).
M
E
T
N
P
C
R
S
1
2
M
D
R
3
4
<2 sec
M
M
G
P
6
7
8
5
R
L
C
9
Skip Tracks
PWR
or
Press Tuning Ring up
or down to advance to
M
O
D
next track. The track
E
number appears for
S
E
L
less than 1 second
then the time remain-
N
C
S
1
ing appears.
T
E
0
1
2. Press a preset button (1–6) to select
corresponding disc number. Buttons 7–10
do not select discs.
10
Pause CD Changer
During CD player operation, press
button to pause CD play. Press
again to resume play.
CD510K
PWR
M
O
D
E
S
E
L
S
C
N
1
®
Fast Forward and Fast Reverse
(High speed audible search)
Press and Hold
the
Tuning Ring up or
down to fast forward or
or
fast reverse a track.
CD play resumes after
you release the ring.
Scan (Preview all Tracks)
Press and hold the SCN button for
N
C
S
1
more than two seconds to play first
ten seconds of each track on current
>2 sec
CD. Press and hold the SCN button
for more than two seconds again to
stop intro and listen to track.
Repeat the Same Track
Press and hold the RPT button for
T
P
R
2
more than two seconds to continuously repeat same track. RPT
>2 sec
appears in the display. Press and
hold the RPT button for more than
two seconds again to stop repeat.
Random (Play all Tracks)
M
D
R
Press and hold the RDM button for
4
more than two seconds to play all
tracks on CD in random order one
>2 sec
time. Press and hold the RDM button
for more than two seconds again to
stop random play.
11
®
CD510K
Specifications
FM Tuner
Tuning range .............................................................................................................................................. 87.5 MHz–107.9 MHz
FM mono sensitivity ........................................................................................................................................................... 12 dBf
50 dB quieting sensitivity (stereo) ...................................................................................................................................... 16 dBf
Stereo separation @ 1 kHz ................................................................................................................................................. 40 dB
AM Tuner
Tuning range .................................................................................................................................................. 530 kHz–1720 kHz
Amplifier
Total system power .............................................................................................................................................. 200 Watts peak
Power output ....................................................................................................................................................front: 2 x 50 Watts
..........................................................................................................................................................................rear: 2 x 50 Watts
CD Player
Signal/noise ratio............................................................................................................................................................... >86 dB
Frequency response ............................................................................................................................................. 20 Hz - 20 kHz
Channel separation ........................................................................................................................................................... >65 dB
D/A converter .................................................................................................................................................................. 1 Bit/CH
General
Power supply...................................................................................................................................11–16 VDC, negative ground
Speaker output impedance .......................................................................................................................................... 4–8 Ohms
Specifications subject to change without notice.
Limited One Year Warranty–USA and Canada
Length of Warranty. This warranty from Recoton Mobile
Electronics shall be in effect for a period of one year from
the date of the first consumer purchase.
Persons Protected. This warranty will be enforceable by
the original owner and any subsequent owners during the
warranty period so long as proof of date of purchase from
an authorized Jensen dealer is presented whenever
warranty service is required.
What is Covered. Except as otherwise specified below, this
warranty covers all defects in material and workmanship in
this product. The following are not covered: damage
resulting from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect line voltage,
unauthorized repair or failure to follow instructions supplied
with the product; damage occurring during shipment (claims
must be presented to the carrier); elimination of car static
or other electrical interferences; any product purchased
outside USA or Canada, or on which the serial number
has been defaced, modified or removed.
How You Can Get Service.
U.S. Purchasers. Please telephone Jensen at
1-800-323-4815. We will either inform you of the name
and address of an authorized Jensen repair station which
will service the product or will advise you to send the
product to a factory service center.
Canadian Purchasers. The product should be returned
to the Jensen dealer from whom it was purchased and
such dealer either will service or arrange for service of
the product.
If shipment of the product is required, it should be packed
securely. The original dated bill of sale must always be
included with the product as proof of warranty coverage.
What We Will Pay For. We will pay for all labor and
material expenses required to repair the product, but you
must pay any labor costs for the removal and/or installation
of the product. If the product is shipped for warranty
service, you must prepay the initial shipping charges, but
Jensen will pay the return shipping charges if the product is
returned to an address inside the USA or Canada.
Limitation of Implied or Statutory Warranties and
Conditions. All implied or statutory warranties and condi-
tions, including warranties or conditions of merchantability,
fitness for particular purposes and non-infringement, are
limited in duration to the length of this warranty.
Exclusion of Certain Damages. Jensen’s liability is limited
to the repair or replacement, at our option, of any defective
product and shall not include incidental or consequential
economic damages of any kind.
Some states and/or provinces do not allow limitations on
how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province.
®
12
Recoton Mobile Electronics
A Division of Recoton Audio Corporation
A RECOTON
®
COMPANY
1090 Emma Oaks Trail
Lake Mary, Florida 32746
©1999 Recoton Audio Corporation
Loading...