Jensen BTM10 User Manual

BTM10

Bluetooth Handsfree Accessory

Accesorio Bluetooth de
Manos Libres

Accessoire mains libres
de Bluetooth

Owner's Manual
Manual del Propietario
Instructions pour le propriétaire

INTRODUCTION

The Jensen BTM10 offers effortless wireless connectivity in a sleek, convenient design,
allowing you to focus on driving.

Features

=

Bluetooth 1.2 specification compliant

=

Supports pairing with pin code (NAME: BTM10, PIN: 1234)

=

A2DP handsfree compatibility

=

Small and easy to integrate into vehicle interior

=

Up to 10 meters connection with Bluetooth devices

=

No radio signal interference

=

High quality stereo audio

COMPLIANCE STATEMENT: This device is verified to comply with Part 15.19 (a) (3) of
the FCC Rules. Operation subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

PAGE 1

Installation Instructions

CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.

1. Before using Bluetooth functions, you must connect the BTM10 to the BT BUS cable
on the back of your BTM10 compatible head unit.

Bluetooth Bus

BTM10

Main Unit

2. Attach the BTM10 to your vehicle's sun visor

using the clip on the back of the BTM10.

PAGE 2

Visor Clip

Pairing your Phone to the BTM10

VM9213/VM9223/VM9313/VM9413/VM9423 Head Units

1. Press the SRC button to access the Source Menu.

2. Select the Bluetooth source (BT).

3. Press the Bluetooth Connect Icon ( ) to begin the pairing process.

4. Make sure Bluetooth is enabled on your phone and search for new devices.

5. Select your head unit model number from the device list.

6. The password for pairing is "1234". During the pairing process, the head unit
model number appears on your mobile phone.

For all other compatible head units, please see the Owner's Manual that came
with your radio for pairing instructions.

PAGE 3

Operation

Bluetooth operation is dependent upon your compatible head unit and
remote control. Operation specific to the BTM10 is listed below:

! To answer an incoming call, press the TALK button on the BTM10.
! To end a call, press the TALK button.

TALK

Please refer to the Owner's Manual that came with your head

unit for additional Bluetooth Operating Instructions.

As with all Bluetooth devices, some features are limited by the
mobile phone's compatibility.

PAGE 4

BTM10