Jensen AL7000AC Installation Manual
Modelno: AL7000AC
This equipment may be operated in all EU and EFTA countries: AT, BE, BG, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IS, IE, IT, LV,LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR, GB
PRODUCT USAGE RESTRICTIONS: This product is intended for indoor use only.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive):
Hereby, Jensen Scandinavia AS, declares that this wireless router is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of confirmity may be consulted at www.jensenscandinavia.com/rtte/
Installation Guide
Internet port
Please connect your
broadband modem
to the internet port.
Power connector
Network ports
Ports for connecting network
devices by cable, such as computer,
Media Server, Network printer
VOIP adapter etc.
USB port
USB port for connecting
a printer or USB hard disk drive.
Reset / WPS*
Reset: Hold for about 10 seconds to
reset AL5000ac to factory default.
WPS: Hold for about to 2-5 seconds
to initiate WPS connection.
* WPS is disabled as default
and needed to be activated in
router GUI (http://192.168.38.1)
beforeuse.
WPS LED
WPS status LED.
WPS LED is
flashing when
setting up a WPS
connection.
2.4GHz LED
LED that show status
for the 2.4GHz network.
The LED will flash when
active.
5GHz LED
LED that show status
for the 5GHz network.
The LED’s will flash
when active.
Network ports LED
Show status for devices
that are connected to
the router by cable.
Internet LED
LED that show
status for the
Internet port.
The LED will flash
when active.
USB LED
Indicates if the
USB port is
correctly
connected.
Sys Led
Displays a
blinking light
when functioning
correctly
Power LED
Displays a solid light
upon powerup
Modelno: AL7000AC
Installation Guide
Network Cable
Power Outlet
Broadband Modem
(Supplied by your ISP)
Network cable
Computer
Internet
Reset/WPS
1 2 3 4USB1/USB2Power
Power Cable
1
CONNECTING
A) Connect the power adapter
to the router and to a power outlet.
B) Connect the enclosed network cable from
your internet modem to the blue internet
port on the router.
If your internet is delivered through
cable-tv you should also ensure the
following:
a) Make sure there is no devices
connected to your modem.
b) Reset the modem by doing a power off/on.
c) Wait further 2 minutes
d) Continue with step 2
AirLink12D5FB
AirLink5GHz12D5FB
2
CONNECT TO WIRELESS NETWORK
Your new router has two wireless networks. One for 2.4GHz and one for 5GHz.
The router is pre-configured with network names and passwords. These are stated on the top of your router and the underside sticker.
Search for the wireless networks with your device and connect.
PC Mac iPhone/iPad Android
1
Problem
If you need help with the setup you can call our
free phone support. When calling you will be asked to
enter an support-id.
This is stated on top and underside sticker.
or send an email to
support@jensenscandinavia.com
22 32 30 76
08 38 30 00
70 70 21 22
09 455 21 22
Norway
Sweden
Denmark
Finland
FINISH
Your wireless device is now connected to internet and ready for use.
No access to internet Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select EASY SETUP from main menu and follow the setup wizard
Change network name
Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu
Change encryption key
Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu
Change channel
Log into the router menu by entering http://192.168.38.1 in your web browser.
Username = admin og password = 1234
Select WIRELESS from main menu. Select the channel you want to use.
Solution Customer support
¢
¢
¢
¢
Please note that some devices may not support the latest 5GHz technologies, if not, your device will only see one wireless network when searching.
Loading...