Jenn-Air JMW9527DAW, JMW9527DAB, JMW9527DAS, JMW9527DAQ User Manual
MICROWAVE WALL OVEN COMBO
PRODUCT DIMENSIONS
INCHES CENTIMETERS
B
D
H
NOTES:
C
2
3
MODEL SKUs
JMW9527DAB
JMW
9527DAQ
JMW
9527DAS
F
JMW
9527DAW
E
J
G
Style of product may vary from picture
4
1. Excluding door handle.
2. 1
1/4" Diameter Conduit Access Hole. Hole must be cut as close to corner of cabinet as possible.
3. 5/8" plywood floor (must support
4. Do not block air intake slots along bottom of oven.
5. Installed combo wall oven overlaps the cut out
This must be taken into consideration when locating cutout if installed unit is to be centered in the cabinet.
6. These appliances have been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194˚ F. If these appliances are installed with cabinets
that have a lower working temperature than
Electrical requirements: Provide for
See serial plate on front of unit for power requirements
Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
310 pounds).
15/16" (2.4 cm) at the top and 1/8" (.3 cm) at the bottom.
194˚ F, discoloration, delamination or melting may occur.
120/240 or 120/208 VAC, 60 Hz.
Loading...