Technical Specifications
Power AC 120V~60Hz AC 230/240/250V~50/60Hz
Fuse
Lamps
Dimension
Weight
20mm Glass 6.3A Fast Blow
( Lamp ELC / JCR )
20mm Glass 5A Fast Blow
( Lamp EFP )
ELC 24V 250W
JCR 15V 150W ( upon request )
EFP 12V 100W ( upon request )
263 x 314 x 202 mm (PUMA)
470 x 314 x 245 mm (PANTHER/JAGUAR)
7.7 kg (PUMA)
10 kg (PANTHER/JAGUAR)
20mm Glass 5A Fast Blow
( Lamp ELC / JCR )
20mm Glass 3A Fast Blow
( Lamp EFP )
Exclusive distribution: BEGLEC CVA – ‘t Hofveld 2 - B-1702 Belgium
WWW.BEGLEC.COM
User Guide
Professional Entertainment Technology
E. FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried
out periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
surroundings can cause greater accumulation of dirt on the unit’s optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 20 days. Clean the internal optics
at least every 30/60 days.
EC Declaration of Conformity
We declare that our products (lighting equipments) comply with the
following specification and bears CE mark in accordance with the
provision of the Electromagnetic Compatibility (EMC) Directive
89/336/EEC.
EN55014-2: 1997 A1:2001, EN61000-4-2: 1995; EN61000-4-3:2002;
EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6:1996,
EN61000-4-11: 1994.
&
Harmonized Standard
EN60598-1: 2000+ALL:2000+A12:2002
Safety of household and similar electrical appliances
Part 1 : General requirements
2C
TABLE OF CONTENTS
A. GENERAL INSTRUCTIONS
B. MAIN FEATURES
C. LAMP
D. HOW TO CONTROL THE UNIT
-----(1) By universal DMX controller
-----(2) Preprogrammed function
-----(3) By easy controller CA-6
E. FIXTURE CLEANING
A. GENERAL INSTRUCTIONS
Please read the enclosed User Guide carefully as they include important points about
safety for the installation, usage and maintenance of the unit.
• Please keep this booklet with the unit for future consultation. If you sell the unit to
another user, be sure that the new user also receives this instruction booklet thus
giving them the necessary information about the use and general warnings
regarding the unit.
• Before the initial start-up, please unpack and carefully check all components in case
any damage may have occurred during transportation.
• Locate in a suitable spot for your device where there is good ventilation. Also, make
sure that no ventilating fans or slots are blocked.
• Protect our environment! Please dispose of the packing boxes properly.
• The electrical work that is necessary for installation must be done by qualified
personnel.
• Always remember to unplug the unit from the main power before any service is done.
Do not open the unit. There are no serviceable parts inside.
( 3 ) By easy controller
The easy remote control is used only in master/slave mode. By connecting to the
1/4” microphone jack of the first unit (its DMX input plug is not used), you will find
that the remote control on the first unit will control all the other units for stand by,
Strobe/Next and Fast/Slow function.
1. STAND BY: Stand by and blackout all the units.
2. STROBE/NEXT: Press the button and keep pressed down,
when the unit is in fast mode, it wills strobe by sound.
Strobe function is only effective while the button is held
down. It has three strobe modes. If the unit is in slow
mode, press the NEXT button for desired colors and
3C
gobos. It will change ten colors and then change one
gobo.
CA-6
• It is very important to ground the yellow/green conductor to earth in order to meet
regulations of safety.
• Check the surrounding area and make sure there are no flammable liquids, water or
metal objects that could enter the fixture. If a foreign object enters the unit,
immediately disconnect the main power. Also, place the fixture in a well-ventilated
room at least about 15 cm from the walls.
• Do not touch any wires during operation, as high voltage is hazardous.
• In the event of serious operating problems, stop using the unit immediately. Never
try to repair the unit yourself. Repairs carried out by unqualified personnel can lead
to damage or malfunction. Please contact the nearest authorized Technical
Assistance Center. Always use genuine spare parts.
3. FAST/SLOW: When the LED is off, it is in FAST Mode.
The unit’s movements are sound activated. If the LED on, it is in SLOW mode
controlled by NEXT button.
( 2 ) Preprogrammed functions
The PUMA can be linked together as master/slave in 2 or 4 channels and run by
built in program chase sequences by sound activation. When sound stops, all the
lights will shut down (blackout) immediately and then the bulb will turn off 15
seconds later. Please refer to the unit dipswitch-setting table for how to set the
dipswitches to achieve master/slave linking.
•In master/slave mode, the dipswitch 10 on the master unit must be in the position
“ on “.
2-Channels dip switches setting
Master
Slave 1
PANTHER / JAGUAR can be linked together as master/slave in daisy chain as
many as required and run by built in program chase sequences automatically or by
sound activation. Not need to set the dipswitches in master/slave mode.
When linking the PANTHER and the JAGUAR in stand-alone mode, the JAGUAR
must be used as the master head.
＊ 2-light show ( for PANTHER / JAGUAR only )
Dipswitch 10 “off” means the unit works normally and “on” means inversion. In order
to creating a great light show, you can set dip switch 10 “on” on any unit that is linking
to the master unit to get contrast movement to each other, even if you have two units
only. Dipswitch 10 on the first unit is no use in the DMX linking, as it is the master unit
that operates the light show.
4-Channels dip switches setting
Master
Slave 1
Slave 2
Slave 3
B. MAIN FEATURES
• Voltage：AC 120V~60Hz or 230V/240V/250V~50/60Hz
• Bulb：ELC 24V 250W / JCR 15V 150W / EFP 12V 100W
• The unit is DMX512 fixture. It features full DMX512 control, 14 gobos/colors plus
open, accurate focusable optics system and stepper motor with blackout feature.
Fan cooling.
• It can be operated by DMX512 control or can be used as an individual unit without
a controller.
• It can be linked together in master/slave connection, as many as required in 4
channels and run by built-in program chase sequences automatically or by sound
activation through an internal microphone to create an intelligent effect.
• Please use a 3 pin XLR cable/plug when connecting them together.
• It features different preprogrammed chase patterns.
• Dimensions：263 x 314 x 202 mm (PUMA)
4C
470 x 314 x 245 mm (PANTHER/JAGUAR)
• Weight：7.7 kg (PUMA)
10 kg (PANTHER/JAGUAR)
C. LAMP
ELC 24V 250W
JCR 15V 150W ( upon request )
EFP 12V 100W ( upon request )
• Always switch off the mains supply and never handle the lamp or luminaire when it
is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
D. HOW TO CONTROL THE UNIT
( 1 ) By universal DMX controller
The DMX512 is widely used in intelligent lighting control, with a maximum of 512
channels.
21
DMX512
COMMON
1
INPUT
1
3
2
Termination reduces signal errors and to avoid signal
transmission problems and interference. It is always
advisable to connect a DMX terminal.
(Resistance 120 ohm 1/4W) between pin2 (DMX-) and
pin3 (DMX+) of the last fixture.
DMX +
DMX -
1
3
3
2
2
y A DMX512 system requires a controller, lighting equipment and cable. These are
connected together in a “daisy chain” with the terminator at the end. The cable
cannot be branched or split to a “Y” cable.
y The terminator requires a 90-120 Ohm 1/4 Watt resistor soldered between two
signal cables.
y The DMX512 uses a very high-speed signal. Inadequate or damaged cables, bad
solder joints or corroded connectors can easily distort the signal and shut down
the system. A reliable DMX512 system starts with good quality cables.
y Each lighting unit needs to have an address set to receive the data sent by the
controller. The address number is between 0-511. The end of the DMX512
system should be terminated reducing signal errors.
y 3 pin XLR connectors are more popular than 5 pin XLR.
43
OUTPUT
1
3
2
120 ohm 1/4W
5C
• Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller2. Dipswitches
Dip #1 #2 #3 #4 #5 #6 #7 #8 #9 #10
Value 1 2 4 8 16 32 64 128 256 Option
• Examples: ( for PANTHER/ JAGUAR )
Channel 01：dip / on : #1（=1）
Channel 06：dip / on : #2, #3（2+4=6）
Channel 11：dip / on : #1, #2,#4（1+2+8=11）
Channel 16：dip / on : #5（=16）
( PUMA- 3 channels; PANTHER/JAGUAR- 5 channels )
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
Loading...