JBL Intellivox ADC V90 Mark II, Intellivox ADC H90 Mark II, Intellivox ADC-V90, Intellivox ADC-H90 Instruction Manual

Installation Manual
Intellivox ADC - V90 & H90 Mark II models
(Part Nos. 576125, 577125, 577135, 576126, 577126 and 577136)
EN 54 -24
JBL Professional® Intellivox ADC Installation Manual
EC DECLARATION OF CONFORMITY
13
1438/CPD/0306
This document confi rms that the product manufactured by Duran Audio BV and described hereafter is in conformity with the following directive(s) and meets the requirements of the following standard(s):
Applicable directive(s)
Applicable standard(s) EN 54-24:2008 Provided options Type B
Product details:
Construction product description
Product model/type Intellivox ADC - V90 and H90 Mark II models
Document references:
Datasheet(s)
Other references ITT report No. 5136/BA/11
Notifi ed product certifi cation body:
Name
Identifi cation CNBOP-PIB-1438
Address
CPD 89/106/EEC LVD 2006/95/EC (see note 1)
Loudspeaker for voice alarm systems for fi re detection and fi re alarm systems for buildings
201104/V90MKII_2.x (V90 datasheet) 201104/H90MKII_2.x (H90 datasheet)
Scientifi c and Research Centre for Fire Protection named after Józef Tuliszkowski - National Research Institute
Nadwiślańska 213 Street, 05-420 Józefów, Poland
Web www.cnbop.pl
Manufacturer:
Name Duran Audio BV
Address Koxkampseweg 10, 5301 KK Zaltbommel, The Netherlands
Web www.duran-audio.com
Authorized by G. Duran Signature
Notes:
1. Only if connected in accordance with the manufacturer’s instructions to mains operated audio equipment with safety properties according to the relevant harmonized standards.
2
Date January 10, 2013
201402/ADCIM
JBL Professional® Intellivox ADC Installation Manual
USER’S NOTICE AND DISCLAIMER
No part of this manual including the software described in it may be reproduced, transmitted, transcribed, stored in a database system or translated without the express written permission of JBL Professional.
Documentation kept by the end user for back-up purposes is excluded from the above.
All products and corporate names mentioned in this manual may be registered trademarks or copyrights of their respective companies. They are used here for indicative purposes only.
The information contained in this manual has been carefully checked for accuracy; however no guarantee is given with respect to its correctness. JBL Professional accepts no responsibility or liability for any errors or inaccuracies that may appear in this manual or the products and software described in it.
Specifications and information contained in this manual are subject to change at any time without notice.
© 2014 JBL Professional. All rights reserved.
201402/ADCIM
3
JBL Professional® Intellivox ADC Installation Manual
This page has been left blank intentionally
4
201402/ADCIM
JBL Professional® Intellivox ADC Installation Manual
TABLE OF CONTENTS
EC declaration of conformity............................2
User’s Notice and disclaimer............................3
1. Important Safety Instructions ........................ 6
2. Introduction ...................................... 7
Applicable models and variants.....................7
What’s in the packaging ..........................8
3. Installation Guide.................................. 9
Preparing For Installation .........................9
Intellivox ADC Connections ........................9
Mechanical Installation ..........................10
Acoustic Centre ................................10
Mounting Options ..............................11
Mounting Procedure ............................13
Wiring Details .................................14
Tap Setting ...................................14
Correction EQ and High-Pass Filter .................15
Securing The Front Grill..........................15
Pilot Tone Indicator .............................16
Speaker Protection .............................16
4. Appendices ......................................17
Appendix 1 - Optional Accessories .................17
201402/ADCIM
5
1. IMPORTANT SAFETY INSTRUCTIONS
JBL Professional® Intellivox ADC Installation Manual
This symbol is intended to alert you to the
presence of uninsulated dangerous voltages
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock.
This symbol is used throughout this manual
and is intended to alert you to the presence of
important instructions.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Only use attachments/accessories specified by the
manufacturer.
10) Use only with the cart, stand, tripod, bracket
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to
avoid injury from tip-over.
11) Refer servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, liquid has been spilled or objects have fallen into the
apparatus, the apparatus does not operate normally, or
has been dropped.
Warning -The installer should ensure that
the mechanical mounting method employed
should be capable of supporting four times
the weight of the unit (i.e., with a safety factor of 4).
Always use both of the brackets provided with the unit.
6
201402/ADCIM
Loading...
+ 14 hidden pages