JBL E System 10 Brochure
Application:
The E-System 10, featuring two EON10 G2 powered speakers, a Soundcraft E6 sound reinforcement mixer, and two AKG D2000S dynamic hypercardioid microphones, is a complete, integrated
sound system intended for a wide range of applications in reinforcement of music and speech.
Key Features:
The E-System 10 is just that – a system. From the
top manufacturers in the pro audio industry, each
component has been selected to support and complement the others.
JBL EON10 G2 Speakers
The second generation of one of the most successful and influential professional speaker systems
ever.
10" Differential Drive™ low-frequency driver
with dual neodymium magnet for light weight
and reduced distortion.
1" JBL compression driver with titanium
diaphragm and ferro-fluid cooling.
125 watts low-frequency and 50 watts high-frequency (bi-amplified) - actual power delivered
to the drivers.
Three inputs. One balanced mic/line selectable
input and one dual-channel, ¼" TRS phone linelevel inputs.
Balanced loop-through/mix output. “Daisychain” additional EON speakers or send the
mixed output to a mixing console.
60° x 90° (nominal) constant directivity horn.
Thermomaster®Total Thermal Management
System
®
. A single piece, cast-aluminum baffle
integrates the woofer frame, horn, and amplifier
heat sink. Air movement in the finned ports dissipates heat - no internal or external cooling
fans are required.
Rugged, light-weight, black co-polymer
enclosure.
Integral 35 mm pole mount receptacle with
securing thumb screw.
Multi-angle enclosure for front of house or stage
monitor application.
For more low-frequency power and performance,
add the EONSUB G2 powered subwoofer or
SoundFactor SF22SP powered subwoofer.
E6 Mixer
6 mic/line input channels
2 stereo input channels
Three-band channel EQ with variable mid-frequency for precise tailoring of the sound
Precision, ultra-linear mic pre-amps
Two auxiliary monitor or effects busses with one
pre/post selectable
True professional +48V phantom power
Smooth 100 mm faders for precise control of
your mix
Individual channel mute switches so you can
mute an input without disturbing your mix
Internal power supply
Simple rack mounting options (available as an
option)
D2000S Microphones
Rounding out the system is a pair of AKG D2000S
handheld, dynamic hypercardioid microphones.
These microphones have been selected to do a
great job in a variety of applications from speech
and vocals to instrument pick up.
Complete
Portable Sound
Reinforcement System
E-System 10 Complete Sound Reinforcement System
A complete sound reinforcement system so good
that no one company could build it all. Start wih
the second generation of the speaker that started
the powered-speaker revolution - the JBL EON10
G2. Then add a Soundcraft E6 mixer with that great
British sound and wide range of features. To complete the system, a pair of dynamic, hypercardioid
microphones from AKG - the D2000S. Rounding
out the system are four 25 ft XLR cables to hook it
all together.
JBL EON10 G2
Freq. Range (-10 dB) 65 Hz - 18 kHz
Freq. Response (±3 dB) 90 Hz - 16 kHz
Horz. Coverage (-6 dB) 90° Nominal
Vert.Coverage (-6 dB) 60° Nominal
Rated Maximum SPL 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D) 493 mm x 356 mm x 307
mm (19.4 in x 14.0 in x
12.1 in)
Net Weight 10.4 kg (23 lb)
LF Driver Integral frame with one 10"
(254 mm) driver, neodymium magnet, 1.5" Differential
Drive voice coil.
HF Driver JBL 2412 1" (throat diame-
ter) compression driver
with titanium diaphragm.
Ferro-fluid cooled.
Amplifier Power LF 125 watts @ low-frequency
driver impedance.
Amplifier Power HF 50 watts @ high-frequency
driver impedance.
Input 1 Sensitivity -48 dBu to 0 dBu for rated
output (Mic/Line switch in
MIC position)
-6 dBu to +20 dBu for rated
output (Mic/Line switch in
LINE position)
Input 2 & 3 Sensitivity -12 dBu to +20 dBu for
rated output
Output Level +26 dBu (peak), Loop/Mix
switch in MIX position
Audio Connectors
Input 1 XLR/F, balanced
Input 2 & 3 ¼" Phone, dual-channel
(TRS)
Loop/Mix Out XLR/M, balanced
Active Crossover Freq. 2.7 kHz
AC Input 110 – 230 VAC, 50 – 60 Hz.,
175 watts rating per UL,
detachable IEC power
cable.
EON10 G2 Block Diagram
Loading...