ALL-IN-ONE LINEAR-ARRAY
PA SYSTEM
USER’S GUIDE
For: Français, Deutsch, Español, visit www.jblpro.com
Contents
Section 1: Important Safety Instructions ���������������������������������������������������������� 1
Care & Cleaning �������������������������������������������������������������������������������������������������������������������������������������������������� 2
Section 2: Precautions ���������������������������������������������������������������������������������������� 3
Section 3: EON ONE PA System Declaration of Conformity ��������������������������� 4
Section 4: Introduction to the EON ONE PA System ���������������������������������������� 5
Getting Started ���������������������������������������������������������������������������������������������������������������������������������������������������� 5
Getting Acquainted with the EON ONE Powered Mixer ��������������������������������������������������������������������������������������7
The Basics ����������������������������������������������������������������������������������������������������������������������������������������������������������7
Audio Inputs �������������������������������������������������������������������������������������������������������������������������������������������������������� 7
Mono Mic/Line Inputs ������������������������������������������������������������������������������������������������������������������������������������������ 8
Bluetooth Input ���������������������������������������������������������������������������������������������������������������������������������������������������� 8
Stereo Inputs ������������������������������������������������������������������������������������������������������������������������������������������������������� 9
Stereo Monitor Outputs ��������������������������������������������������������������������������������������������������������������������������������������� 9
Master Volume & Limit Led ���������������������������������������������������������������������������������������������������������������������������������9
Section 5: System Specications �������������������������������������������������������������������� 10
Section 6: Cables & Connectors ���������������������������������������������������������������������� 11
Section 7: Contact Information ������������������������������������������������������������������������ 12
Section 8: Warranty Information ���������������������������������������������������������������������� 13
Section 1: Important Safety Instructions
1� Read these instructions�
2� Keep these instructions�
3� Heed all warnings�
4� Follow all instructions�
5� Do not use this apparatus near water�
6� Clean only with dry cloth�
7� Do not block any ventilation openings� Install in accordance with the manufacturer’s instructions�
8� Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9� Do not defeat the safety purpose of the polarized or grounding-type plug� A polarized plug has two blades with one
wider than the other� A grounding-type plug has two blades and a third grounding prong� The wide blade or the
third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet�
10� Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus�
11� Only use attachments/accessories specied by the manufacturer.
12�
13� Unplug this apparatus during lightning storms or when unused for long periods of time�
14� Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped�
15� Service Instruction in Owner’s Manual: “CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY� TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM
ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO�”
16� To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC
receptacle�
17� “WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE�”
18� Do not expose this equipment to dripping or splashing and ensure that no objects lled with liquids, such as vases,
are placed on the equipment�
19� WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain
readily operable�
20�
21�
22� No naked ame sources, such as lighted candles, should be placed on the apparatus.
23� For adequate ventilation, do not install this equipment in a conned or enclosed space, such as a book case or
similar unit� Product ventilation should not be impeded by covering the ventilation openings with items such as
newspaper, tablecloths, curtains, etcetera�
Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
apparatus� When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over�
Protective earthing terminal� The apparatus should be connected to a mains socket outlet with a
protective earthing connection�
Correct Disposal of this product� This marking indicates that this product should not be disposed with
other household wastes throughout the EU� To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources� To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased� They can take this product for environmental safe
recycling�
1
CARE & CLEANING
EON ONE systems may be cleaned with a dry cloth� Do not get moisture into any of the openings in the system�
Ensure that the system is unplugged from the AC outlet before cleaning�
THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES� TO PREVENT ELECTRIC SHOCK OR
HAZARD, DO NOT REMOVE CHASSIS, MIXER MODULE, OR AC INPUT COVERS� NO USER SERVICEABLE
PARTS INSIDE� REFER SERVICING TO QUALIFIED SERVICE PERSONNEL�
2
Section 2: Precautions
The EON ONE PA system covered by this manual is not intended for use in high
moisture environments� Moisture can damage the speaker cone and surround and
cause corrosion of electrical contacts and metal parts� Avoid exposing the speakers to
direct moisture� Keep speakers out of extended or intense direct sunlight� The driver
suspension will prematurely dry out and nished surfaces may be degraded by long-
!
Hearing Damage, Prolonged Exposure To Excessive SPL
The EON ONE system is capable of generating sound pressure levels (SPL) sufcient to cause permanent
hearing damage to performers, production crew, and audience members� Caution should be taken to avoid
prolonged exposure to SPL in excess of 90 dB�
WATCH FOR THESE SYMBOLS!
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (Servicing) instructions in the literature
accompanying the product�
term exposure to intense ultra-violet (UV) light. The EON ONE PA system can generate
considerable energy� When placed on a slippery surface such as polished wood or
linoleum, the speaker may move due to its acoustical energy output� Precautions
should be taken to assure that the speaker does not fall off a stage or table on which it
is placed�
The lightning ash with the arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence
of un-insulated “Dangerous Voltage” within the products
enclosure that may be of sufcient magnitude to constitute a risk
of electric shock to persons�
WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE�
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
3
Section 3: EON ONE PA System Declaration of Conformity
This equipment complies with the EMC directive 89/336/EEC
Modied by
92/31/EEC
93/68/EEC
98/13/EEC and LVD 73/23/EEC modied by 93/68/EEC
This product meets safety standards:
EN60065:2002
UL6500 7th Edition: 2003
UL 60065 - STANDARD FOR AUDIO, VIDEO AND SIMILAR ELECTRONIC
APPARATUS - SAFETY EQUIREMENTS - Edition 7 - Revision Date 2007/12/11
CSA C22�2 NO 60065-03 - AUDIO, VIDEO AND SIMILAR ELECTRONIC
APPARATUS – SAFETY REQUIREMENTS - Edition 1 - Revision Date 2006/04/01
IEC 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS -- SAFETY
REQUIREMENTS - Edition 7�1 - Issue Date 2005/12/01
And EMC Standards
EN55103-1 (E2)
EN55103-2 (E2)
This device complies with Industry Canada’s licence-exempt RSSs� Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence�
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement�
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment�
FCC Compliance Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation�
CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment�
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
of the FCC Rules� These limits are designed to provide reasonable protection against harmful interference in a residential
installation� This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications� However there is no
guarantee that the interference will not occur in a particular installation� If this equipment does cause harmful interference to
radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
collect the interference by one or more of the following measures�
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
• FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment� This device should be
installed and operated with minimum distance 20cm between the radiator & your body�
4
Section 4: Introduction to the EON ONE PA System
Thank you for choosing the JBL EON ONE PA system� The EON ONE is an all-in-one linear-array PA system
featuring multiple input channels with individual tone controls, reverb, and Bluetooth audio streaming, allowing the
user to integrate the system into any number of audio spaces and still look amazing� And with a design that stores
all the components into one unit for a one-hand carry, the EON ONE is perfect for situations where ease and
portability are just as important as our legendary JBL sound�
Included in the EON ONE package are:
• 1 JBL EON ONE base
• 2 listening height spacers
• 1 column speaker array
• 1 power cable
• Quick start guide
GETTING STARTED
1� Remove EON ONE system from the carton�
2� Open top cover by pushing the latch lever and remove spacers and column speaker array from the back of
the unit�
3� Place spacers for desired listening level then attach the column speaker array�
Speaker Array
Speaker Array
Speaker Array Only 1 Spacer 2 Spacers
Speaker Array
Spacer
SpacerSpacer
5
4� Connect the female end of the power cable to the mixer and plug the male end into the wall socket or
extension cord� Turn the “MASTER VOLUME” control all the way to the left� Now turn the power switch to
the “on” position — the “POWER” LED indicator should now be illuminated� At this point you are ready to
make audio connections, adjust the channel and master volumes, then listen to the signals amplied by the
system�
Power LED
Master Volume
AC Power Inlet
& Power Switch
6
GETTING ACQUAINTED WITH THE EON ONE POWERED MIXER
This part of the EON ONE system houses the mixing board and power amplier. Here you will connect all of the
microphones, musical instruments, and external sound sources (like MP3 players, CD players, or Bluetooth audio
sources). The MONITOR OUTPUTS provide a “Front of House” feed and can be connected to recording devices
or additional speakers (like a personal monitor or another PA system).
THE BASICS
The mixing board is actually a very simple device. A “mixing board” brings audio sources “in” (through the inputs)
and routes the signal to the outputs (MASTER VOLUME or MONITOR OUTPUTS). The mixer controls enable
the user to affect the tone and/or volume in addition to routing the signal and adding reverb to individual input
sources�
Let’s look at the “inputs” rst:
AUDIO INPUTS
The EON ONE has 6 inputs: 2 mono inputs and 2 stereo inputs� All of the inputs will route to the speakers and
to the MONITOR OUTPUT SECTION� EON ONE also includes Bluetooth audio streaming from your favorite
Bluetooth audio device�
7
MONO MIC/LINE INPUTS
Moving from left to right there are 2 identical input strips comprised of (from top to bottom) a treble control,
bass control, reverb control, reverb on/off button, volume control, mic/line selector and a XLR 1/4" combination
connector�
Treble control adjusts the amount of high
frequencies on the particular channel
Bass control adjusts the amount of low
frequencies on the particular channel
Effect control adjusts the amount of
effect on the particular channel
Channel Volume control adjusts the
gain on the particular channel
MIC/LINE “SELECTOR” allows you to
select between a microphone (XLR)
input and a line (1/4" phone) input
Combination 1/4" phone plug and
XLR male input
BLUETOOTH INPUT
The EON ONE comes equipped with the ability to stream Bluetooth audio� To connect a
Bluetooth device, rst press the BLUETOOTH PAIR button on the back of the EON ONE. Then
select "EON ONE" from the source device to complete the pairing� Once paired, the blinking
BLUETOOTH LED will turn solid and audio can be streamed from the connected device�
8
STEREO INPUTS
The EON ONE has two stereo inputs and these are used primarily for MP3 or CD players but could be used with
the stereo output of an electronic keyboard, instrument pre-amp or processor, or an electronic drum machine�
The inputs labeled “CH 3/4” offer the option of using ¼" phone plugs or RCA plugs and this channel has a volume
control� The input labeled “CH 5/6” is a 3�5 mm stereo input of the type typically found on personal music players�
This input does not have a volume control as personal music players usually have a “volume control” built into the
unit� This is the best way to control the volume of the unit plugged into this input�
Volume control for “STEREO IN 3/4”
Stereo in 3/4 RCA inputs
(use with MP3 Player,
CD, or any consumer
type electronics)
Stereo in 3/4 1/4" phone inputs
instrument pre-amp or processor, or an
(use with electronic keyboard,
electronic drum machine)
“CH 5/6” 3�5 mm input jack
for use with personal music
players
STEREO MONITOR OUTPUTS
These outputs allow you to route the stereo mixer signal to another destination like a
recording device, personal monitor, or to another PA system�
MASTER VOLUME & LIMIT LED
Your EON ONE is equipped with a “Master Volume” that controls the overall output
volume of the system and a Yellow LED that indicates that you have approached the
maximum output�
9
Section 5: System Specications
EON ONE
System
System Type: Portable Line Array with powered mixer
Maximum SPL Output: 118 dB peak system output (pink noise)
Frequency Range (-10dB): 37�5Hz – 18�5kHz
Frequency Response (-3dB): 45Hz – 18kHz
AC input : 100 - 120 VAC, 220-240 VAC 50/60 Hz
Amplier
Mixer
Speaker
Design: Class D
System Power Rating: 250 Watts LF, 130 Watts HF
Input Connectors: 6 inputs (2 Mono Mic/Line, 2 x Stereo)
Channels:
Input Impedance: Ch 1-2 Combo: XLR 40 K Ohms Balanced
Output Connectors: Monitor outputs: one pair of RCA jacks (stereo)
Signal Indicators: Limit: Yellow LED indicates limiter active condition
EQ: Individual channel Bass and Treble controls, center detent, +/-12 dB cut and boost
System Limiter: On Board DSP Limiting and Tuning
LF Driver: 1 x 254mm (10 in) woofer
HF Driver: 6 x 2" drivers
Coverage Pattern: 100º x 50º nominal
Enclosure: Polypropylene
Grille: Powder coated perforated steel
Dimensions (H x W x D)
Unit Dimensions:
Packaged Dimensions:
1-2 are XLR / 1/4" jack combo connectors
(XLR is a mic level input, 1/4" is a line level input)
3-4, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
5-6 is a 3�5 mm stereo jack
Ch 1-2 Combo: TRS 40 K Ohms Balanced
Ch 3-4: TRS 20 K Ohms Balanced
Ch 3-4: RCA 5 K Ohms Unbalanced
Ch 5-6: 3�5 mm 10 K Ohms Unbalanced
23.3" x 14.5" x 17" (593mm x 369mm x 434mm)
30.9" x 15.6" x 22.5" (769mm x 397mm x 572mm)
10
Net Weight of System: 18.51 kg (40.8 lbs)
Section 6: Cables & Connectors
XLR/F to XLR/M microphone cable
The standard cable for interconnection of microphone and linelevel signals in professional audio systems�
Example: Microphone to mixer�
TRS (balanced) 1/4" phone to XLR/M cable
TRS (unbalanced) 1/4" phone to XLR/M cable
TS (unbalanced) 1/4" phone to XLR/M cable
XLR/M to RCA (phono) cable
TS (unbalanced) 1/4" phone to RCA (phono) cable Connects an unbalanced 1/4" output to an RCA input�
TRS 1/4" phone to dual 1/4" phone cable
XLR/F to XLR/M audio ground lift adapter
For connecting balanced devices with 1/4" phone; may be
used interchangeably�
For connecting instruments with unbalanced outputs to
balanced XLR inputs�
This cable is electrically identical to “TRS” (unbalanced)
1/4" phone and may be used interchangeably�
Connects consumer audio products and some DJ mixer
outputs to professional audio equipment inputs�
Splits a stereo output into separate left/right signals� Also
used for connecting signal processors to mixer insert jacks�
Used for breaking ground loops between interconnected
devices — works with balanced inputs and outputs only�
XLT/F to XLR/M Audio Groud Lift
(no connection)
11
Section 7: Contact Information
Mailing Address:
JBL Professional
8500 Balboa Blvd�
Northridge, CA 91329
Shipping Address:
JBL Professional
8500 Balboa Blvd�, Dock 15
Northridge, CA 91329
(Do not return product to this address without rst obtaining prior authorization from JBL)
Customer Service:
Monday through Friday
8:00am - 5:00pm
Pacic Coast Time in the U.S.A.
(800) 8JBLPRO (800.852.5776)
www�jblproservice�com
On The World Wide Web:
www�jblpro�com
Professional Contacts, Outside the USA:
Contact the JBL Professional Distributor in your area� A complete list of JBL Professional international distributors
is provided at our U�S�A� website: www�jblpro�com
Product Registration:
Register your product online at www�jblpro�com
12
Section 8: Warranty Information
The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for
ve years from the date of the rst consumer purchase. JBL ampliers are warranted for three years from the date
of original purchase� Enclosures and all other JBL products are warranted for two years from the date of original
purchase�
Who Is Protected By This Warranty?
Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product
has been purchased in the Continental United States, Hawaii or Alaska� (This Warranty does not apply to JBL
products purchased elsewhere except for purchases by military outlets� Other purchasers should contact the local
JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty
service is required�
What Does The JBL Warranty Cover?
Except as specied below, your JBL Warranty covers all defects in material and workmanship. The following
are not covered: Damage caused by accident, misuse, abuse, product modication or neglect; damage occurring
during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual;
damage resulting from the performance of repairs by someone not authorized by JBL; claims based upon any
misrepresentations by the seller; any JBL product on which the serial number has been defaced, modied or
removed�
Who Pays For What?
JBL will pay all labor and material expenses for all repairs covered by this warranty� Please be sure to save
the original shipping cartons because a charge will be made if replacement cartons are requested� Payment of
shipping charges is discussed in the next section of this warranty�
How To Obtain Warranty Performance
If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service
Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818-893-8411). We may
direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair� Either way,
you’ll need to present the original bill of sale to establish the date of purchase� Please do not ship your JBL
product to the factory without prior authorization� If transportation of your JBL product presents any unusual
difculties, please advise us and we may make special arrangements with you. Otherwise, you are responsible
for transporting your product for repair or arranging for its transportation and for payment of any initial shipping
charges� However, we will pay the return shipping charges if repairs are covered by the warranty�
Limitation of Implied Warranties
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY�
EXCLUSION OF CERTAIN DAMAGES
JBL’S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE
PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND� SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT
ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
AND EXCLUSIONS MAY NOT APPLY TO YOU� THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE�
13
Rev A
Loading...