Technical Manual
JBL EON15-G2
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Power Capacity: 300 Watts @ Low Frequency
Driver Impedance.
100 Watts @ High Frequency
Driver Impedance
• Frequency Range: 39 Hz – 18 kHz (± 10dB)
• Sensitivity: 129 dB SPL, 1 Watt @1 Meter
• Crossover Frequency: 1.5 kHz
SYSTEM COMPONENTS:
• Low Frequency Integral Frame with one 15”(380 mm)
Transducer: Driver, Dual Neodymium Magnet, 2”
Differential-Drive Voice Coil
• DC Resistance: 1.4 ohm ±10%
• High Frequency JBL 2418H-1 1” (Throat Dia.)
Transducer: Compression Driver with 1.75 Dia.
Titanium Diaphragm. Ferro-fluid Cooled.
• DC Resistance: 3.7 ohm ±10%
• Input 1 Sensitivity: -44 dBu to -22 dBu for Rated Output
(Mic/Line Switch in Mic Position)
-12 dBu to +20 dBu for Rated Output
(Mic/Line Switch in Line Position)
SYSTEM COMPONENTS:
(CONT’D)
• Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for Rated Output
• Output Level: +20 dBu (peak), Loop/Mix Switch in
MIX position.
• Audio Connectors: Input 1:XLR/F Balanced
Input 2 & 3: 1/4” Phone, Balanced
(TRS)
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 200mv input RMS, pot at 1/2, tone
flat.
B. L.F. Aural Sweep Test: 4.0V Input, 20 Hz to 4 kHz
C. H.F. Aural Sweep Test: 1.0V Input, 200 Hz to 1200 Hz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 686mm x 430mm x 444mm D
(27.0 x 17.0 x 17.5 in. D)
• Shipping Weight: 46 lbs. (21 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
Owners Manual
981-00059-00
Carton
990-00213-00
Bag
32259-001
Bottom Tray
991-00051-00
Filler
991-00050-00
SLV, W/MIC
CUTOUTEON 15’S
Cord, AC
Line 120V
425-00000-00
Use 321101-001
Amplifier Assy
339555-001
Speaker, High Freq
2418H-1
Diaph Repl
D8R2418-1
(SEE SCHEMATIC PAGES)
EON15-G2LF
Cone Repl
C2REON15P-2
WHT
RED
BLUE
BLK