Application:
Live sound reinforcement,speech,vocals,
and music playback in entertainment, A/V,
and institutional venues - especially when
ease of use,audio quality and por tability
are important factors.
Amplification,mixing, and monitoring for
electronic musical instruments.
Key Features:
The second generation of one of the most
successful and influential professional
speaker systems ever.
15˝ Differential Drive® low-frequency driver
with dual neodymium magnet for light
weight and reduced distortion.
1˝ (throat diameter) JBL compression driver
with 1.75˝ titanium diaphragm and ferro-fluid
cooling.
300 watts low-frequency and 100 watts
high-frequency (bi-amplified) - actual power
delivered to the drivers.
Built in 3-input mixer.One balanced mic/line
input,two 1/4˝ phone line-level inputs.
Two-band equalization.
Balanced loop-through/mix output.“Daisychain”additional EON speakers or send the
mixed output to a mixing console.
60° x 90° (nominal) constant directivity horn.
Thermomaster® Total Thermal Management
System®. A single piece,cast-aluminum
baff le integrates the woofer frame,horn,
and amplifier heat sink. Air movement in
the finned ports dissipates heat - no internal
or external cooling fans are required.
Rugged,light-weight,black co-polymer
enclosure.
Integral 35 mm pole mount receptacle.
Multi-angle enclosure for front of house or
stage monitor application.
Tailored dynamic processing protects
amplifiers and speakers from being
over-driven without producing extreme
changes in frequency response as level varies.
Extended low-frequency performance
Delivers powerful bass down to 39 Hz.
EON15 G2
Preliminary Specifications:
Freq.Range (-10 dB): 39 Hz - 18 kHz
Freq.Response (±3 dB): 42 Hz - 17 kHz
Horz.Coverage (-6 dB): 90° Nominal
Vert.Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 129 dB,@ 1 m (3.3 ft)
Dimensions (H x W x D): 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)
Net Weight: 21 kg (46 lbs.)
LF Driver: Integral frame with one 15˝ (380 mm) driver,dual
neodymium magnet,2˝ differential drive voice-coil.
HF Driver: JBL 2418H-1 1˝ (throat diameter) compression
driver with 1.75˝ diameter titanium diaphragm.
Ferro-fluid cooled.
Amplifier Power LF: 300 watts @ low-frequency driver impedance.
Amplifier Power HF: 100 watts @ high-frequency driver impedance.
Input 1 Sensitivity: -44 dBu to -22 dBu for rated output (Mic/Line switch
in MIC position)
-12 dBu to +20 dBu for rated output (Mic/Line switch
in LINE position)
Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for rated output
Output Level: +20 dBu (peak),Loop/Mix switch in MIX position
Audio Connectors
:
•Input 1
:
XLR/F,balanced
•Input 2 & 3
:
1/4˝ Phone,balanced (TRS)
Crossover Freq
:
1.5 kHz
Limiting
:
Low frequency amplifier controlled by dynamic filter
Loop/Mix Out
:
XLR/M,balanced
EQ
:
High Frequency Shelving,±15 dB @ 5 kHz
Low Frequency Shelving,±15 dB @ 120 Hz.
AC Input
:
110 - 230 VAC,50 - 60 Hz.,175 watts rating per UL,
detachable IEC power cable
Powered
Speaker
System
▼▼▼▼▼▼▼▼▼▼▼▼▼
SS2-BK Tripod Stand
ESK15 Suspension Kit for
EON 15
˝ models
BRK15 Bracket,adapts EON 15˝
models to OmniMount®
brackets
EON15WB Zippered,plush-lined
Cordura® bag with wheels
EON15 BAG Zippered,plush-lined
Cordura® carrying bag.
We are constantly improving our products so these
preliminary specifications are subject to change
without notice.
©Copyright 2000 JBL Professional
Part Number:SSEON15-G2
JBL Professional
8500 Balboa Boulevard,
P.O.Box 2200
Northridge,California 91329 U.S.A.
www.jblpro.com
MIC
SIGNAL
INPUT2
INPUT3
INPUT1
OUT
INPUT2
INPUT3
W HIGH
HPF
INPUT1
SUM
O
U
T
PEAK
SIGNAL
I
N
P
U
T
1
2
3
HF
EQ
LF
MIX
LOOP
P
U
T
LINE
MIC
On Axis Frequency Response
Audio Panel
Block Diagram
Available Accessories
EON15 G2
▼
CRP 15M
6/00
INPUT1
LINE
MIC
INPUT2
INPUT3
OUT
MIC
INPUT1
INPUT2
INPUT3
LOOP
MIX
SIGNAL
SUM
LOW HIGH
PEAK
HPF
EQ
DYNAMIC
FILTER
LPF
90W
&
300W
Loading...