JBL BassPro Hub User Manual

BassPro Hub

11" (279mm) Spare tire subwoofer with built-in 200W RMS ampliﬁer with remote control

JBL’s BassPro Hub Subwoofer Rattles Your Rear View Mirror.

The new JBL BassPro Hub subwoofer delivers show & shine performance without crowding

your passengers or sacrificing cargo area. This all-in-one powered subwoofer system fits

into the hub of your spare tire for a super easy installation and out of sight sound solution.

The built-in Class D amplifier delivers 200W RMS and is designed to work with the BassPro

Hub subwoofer and enclosure as a system. The 11" (279mm) feather-light fiberglass

woofer cone with rubber surround delivers the signature kick and punch of JBL bass. And

with over temperature protection (OTP) and over current protection (OCP) you can count

on reliability at peak volume levels. The included remote control enables adjustment of

crossover point, gain, phase—and a bass boost of 12dB when you’re in the mood and on

the move. Whether you’re cruising or competing, the JBL BassPro leaves the competition

behind without missing a beat.

Features

Fiberglass Woofer Cone with Rubber Surround

Built-in Class D 200W RMS ampliﬁer

Wired Remote with User Interface Controls

Line-level Inputs and Speaker-level Inputs

Harman Standard Reliability Testing

JBL at an Affordable Price

BassPro Hub

11" (279mm) Spare tire subwoofer with built-in 200W RMS ampliﬁer with remote control

Features and Beneﬁts

Fiberglass Woofer Cone with Rubber Surround

The 11" (279mm) woofer cone is engineered to deliver fast and tight, deep bass with low distortion and unwanted second and third order anomalies.

Built-in Class D 200W RMS ampliﬁer

The JBL subwoofer system’s built-in ampliﬁer is optimized to work as a system with the woofer. Its Class D design runs cooler and draws less current from your vehicles electrical system making it the perfect concealed subwoofer solution.

Wired Remote with User Interface Controls

Gain control adjusts the volume level right from the drivers seat. Phase switch changes the input phase to inverted or noninverted. (This can sometimes be helpful for troubleshooting.) Crossover frequency control adjusts the crossover frequency to any point between 50Hz and 150Hz. Bass EQ control provides 12dB of boost.

Line-level Inputs and Speaker-level Inputs

The JBL BassPro Hub has line level inputs and speaker inputs that allow you to connect to any car audio system making it a great upgrade to your factory system or the bass foundation of the aftermarket system of your dreams.

Harman Standard Reliability Testing

JBL speakers have to undergo a testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.

JBL at an Affordable Price

This is JBL—the legendary speaker and sound company that has excited audio enthusiasts for over seventy years. There’s nothing better than riding with JBL.

What’s in the box:

BassPro Hub Subwoofer Safety sheet Quick Start Guide (full manual online) Hardware for attachment to vehicle Wiring harness Remote controller with 5 meters cable

Technical Specifications

Amplifier Power: 200W RMS (2 ohms) Frequency Response: 30Hz – 150Hz Fuse: 30A Maximum Current Draw: 30A Quiescent Current Draw: <1.2A Crossover Frequency: 50Hz – 150Hz Crossover Slope: 24dB/Octave Bass Boost: 0 – 12dB Variable @ Fix 50 Hz Line level input sensitivity: 0.2 V – 4V Speaker level input sensitivity: 0.5V – 10V Dimensions (D x H): 14-3/16" x 6-1/2"

(D360mm x H165mm)

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com

© 2018 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, speciﬁcations and appearance are subject to change without notice.