JBL Bar 2.0 ALL-IN-ONE Owner's Manual
Bar 2.0 ALL-IN-ONE
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Verify Line Voltage Before Use
The JBL Bar 2.0 (soundbar) has been designed for use with
100-240 volt, 50/60 Hz AC current. Connection to a line voltage
other than that for which your product is intended can create
a safety and re hazard and may damage the unit. If you have
any questions about the voltage requirements for your specic
model or about the line voltage in your area, contact your retailer
or customer service representative before plugging the unit into
a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied
with your unit. We do not recommend that extension cords be
used with this product. As with all electrical devices, do not run
power cords under rugs or carpets, or place heavy objects on
them. Damaged power cords should be replaced immediately
by an authorized service center with a cord that meets factory
specications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always
pull the plug; never pull the cord. If you do not intend to use this
speaker for any considerable length of time, disconnect the plug
from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product.
Opening the cabinet may present a shock hazard, and any
modication to the product will void your warranty. If water
accidentally falls inside the unit, disconnect it from the AC power
source immediately, and consult an authorized service center.
2
TABLE OF CONTENTS
English
IMPORTANT SAFETY INSTRUCTIONS 2
1 INTRODUCTION 4
2 WHAT’S IN THE BOX 4
3 PRODUCT OVERVIEW 4
3.1 CONTROLS AND INDICATORS 4
3.2 CONNECTORS 5
3.3 REMOTE CONTROL 5
4 PLACE 6
4.1 DESKTOP PLACEMENT 6
4.2 WALL-MOUNTING 6
9 SOFTWARE UPDATE 9
10 PRODUCT SPECIFICATIONS 9
11 TROUBLESHOOTING 9
12 TRADEMARKS 10
13 OPEN SOURCE LICENSE NOTICE 10
5 CONNECT 6
5.1 TV CONNECTION 6
5.2 BLUETOOTH CONNECTION 7
6 PLAY 7
6.1 POWER-ON/AUTO STANDBY/AUTO WAKEUP 7
6.2 PLAY FROM THE TV SOURCE 8
6.3 PLAY FROM THE BLUETOOTH SOURCE 8
7 SOUND SETTINGS 8
8 RESTORE FACTORY SETTINGS 9
www.jbl.com
3
1 INTRODUCTION
Thank you for purchasing the JBL Bar 2.0 All-in-One (soundbar)
which is designed to bring an extraordinary sound experience to
your home entertainment system. We encourage you to take a
few minutes to read through this manual, which describes the
product and includes step-by-step instructions for setting up
and getting started.
To make the most of product features and support, you
may need to update the product software through the USB
connector in the future. Refer to the software update section
in this manual to ensure that your product has the latest
software.
Designs and specications are subject to change without notice.
If you have any questions about the soundbar, installation or
operation, please contact your retailer or customer service
representative, or visit our website: www.jbl.com.
HDMI cable
Wall-mounting kit
2 WHAT’S IN THE BOX
Unpack the box carefully and ensure that the following parts are
included. If any part is damaged or missing, do not use it and
contact your retailer or customer service representative.
Main unit
Remote control (with 2 AAA batteries)
Power cord*
Product information & wall-mounting template
3 PRODUCT OVERVIEW
3.1 Controls and indicators
1 32
4
1. (Power)
• Switch on or to standby
2. -/+ (Volume)
• Decrease or increase the volume
• Press and hold to decrease or increase the volume
continuously
• Press the two buttons together to mute or unmute.
3. (Source)
• Select a sound source: TV (default) or Bluetooth
* Power cord quantity and plug type vary by region.
4
Loading...