Page 1
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL AWC82/-BK
REV A
PACKAGE
WIRING DIAGRAM
11-12
Technical Manual
JBL AWC82/-BK
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impediance: 8 Ohms
• Long-Term System Power
Rating: 250W, 2 hrs
200W, 100 hrs
• Frequency Response (±3 dB):100 Hz - 20 kHz
• Frequency Range (-10 dB): 80 Hz - 20 kHz
• Maximum SPL: Direct 8 ohm:118 dB (peaks of 124 dB)
200W Tap: 117 dB
• System Sensitivity: 94 dB, (Ave 100 Hz - 20 kHz)
2.83V @ 1 Meter
• Crossover Frequency: 1.8 kHz, 3rd order (18 dB/oct) high-
pass plus conjugate to HF, 2nd order
low-pass to LF
SYSTEM COMPONENTS:
• Cabinet: Enclosure (Not for Sale)
• Grille: 5026574, 5026687 (BK)
• Low Frequency Driver: Kevlar-reinforced cone with weather
treatment, 50 mm (2 in) voice coil
• DC Resistance: 5.2 ohm
SYSTEM COMPONENTS:
(CONT’D)
• High Frequency 25 mm (1 in) diaphragm and voice coil
Transducer diameter, high temperature polymer
patented design, fluid-cooling
• DC Resistance: 3.6 ohm +/- 0.2 ohm
• Network Assembly: 5026640
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7V Input, 50 Hz to 20 kHz
B. L.F. Aural Sweep Test: 10V Input, 20 Hz to 1 kHz
C. H.F. Aural Sweep Test: 2V Input, 2 kHz to 16 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 300 x 300 x 305 mm D
(11.8 x 11.8 x 12.0 in.D.)
• Net Weight: 21.5 lb (9.8 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
SEE NETWORK SCHEMATIC (5026640) PAGE 2
Woofer
5026643
H/F Driver
2414H-C
(5000169X)
Network
Assembly
5026640
Cardboard
5026658
Top, Styrofoam
5026661
Bottom,Styrofoam
5026664
Master Carton
5026586
5026699 (BK)
Serial Number
Corner Label for
Carton
5026590
5026702 (BK)
Model Label
5026580
5026693 (BK)
Serial Number
Label
5026583
5026696 (BK)
U-Bracket
5026577
5026690 (BK)
Warranty 59660
Transformer Taps: 70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
.187
YEL
.250
YEL/BLK
.250
GRN
.187
GRN/BLK
Gland Nut
5026625
Terminal
Compartment
Cover
5026676
5026753 (BK)
Screw Bag
5026679
5026756 (BK)
OM Bag
5026655
Tap Switch
Label
5026628
Page 2
JBL AWC82/-BK
NETWORK ASSEMBLY SCHEMATIC - (5026640)
JBL AWC82/-BK
Individual Parts for the above crossover are not available.
A complete replacement assembly should be ordered.
Transformer Diagram
T ransformer T APS
Page 3
COMPONENT EXPLODED VIEW
JBL AWC82/-BK
JBL AWC82/-BK
Logo
5026622
Grille Screw (8)
5026673
5026750 (BK)
Washer
5026670
5026747 (BK)
Grille
5026574
5026687 (BK)
Speaker Screw (6)
5026652
Baffle Screw (8)
5026618
Nut (6)
5026617
Eva Gasket
5026613
Driver Hold Down Bar
5026637
HF Bracket Screw (2)
5026606
Tap Switch Screw (2)
5026599
Transformer
5026631
Plug for Insert
5026596
Input Terminal Screw (2)
5026593
Input Terminal
part of the
transformer
*Transformer Screw (10)
5026602 (*)
Rear Enclosure
(Not Avail)
*Transformer Screw
Network Assembly
5026640
Woofer
5026643
Gasket
5026649
H/F Driver
2414H-C
(5000169X)
Selector Switch
part of the transformer
Loading...