Janome DC 2150 Computerised Sewing Machine
DC2150
Work Space |
170mm (6.7”) x 110mm (4.3”) |
Sewing Speed |
Up to 700 stitches per minute |
Machine Screen |
LCD screen with backlight |
Built-in Stitches |
50 |
Stitch Width |
7mm |
Buttonholes |
3 |
Needle Positions |
Various |
Foot Pressure |
No |
Needle Threader |
Yes |
Lighting |
LED light |
Standard Sewing Feet |
4 |
Extra Wide Table |
Optional |
Weight |
5.4KG |
Free Arm Length |
90mm from needle |
Quick Reference Stitch Chart |
Yes on machine front |
Stitch Length |
Up to 5mm |
Speed Control Slide |
Yes |
Stitch Elongation |
No |
Mirror Image Stitches |
No |
Bobbin Winder |
Yes |
Fonts in Normal Sew |
No |
AcuFeed Balance Dial |
No |
Drop Feed |
Yes |
Superior Plus Feed System |
7 piece feed dog |
Needle Plate |
Has patented needle plate markings |
|
for precision sewing with needle drop |
|
position, angle marks and sewing guides in |
|
front of the sewing foot |
Thread Cutter |
On face plate |
Stop/Start Button |
Can sew without foot control. Hold button |
|
when start sewing & machine sews slow, |
|
same at end of sewing press & hold button |
|
& machine will sew slow |
Needle Up/Down Function |
Yes |
Auto Lock-off Stitch button |
Locks off your stitching at the push of |
|
button |
Reverse Button |
Yes |
Magnifier |
No |
Upper Thread Sensor |
No |
Bobbin Thread Sensor |
No |
Storage |
Accessory box |
Carry Handle |
Short handle slots neatly into the top of |
|
machine |
Janome Accessory Carrying Case |
No |
Foot Control |
Yes |
Internal Frame |
Rigid die-cast aluminium frame |
STANDARD ACCESSORIES |
· Zigzag Foot A |
|
· Zipper Foot E |
|
· Satin Stitch Foot F |
|
· Automatic Buttonhole Foot R |
|
· Janome Plastic Bobbins x 4 |
|
· Needle Set |
|
· Additional Spool Pin |
|
· Felt |
|
· Screwdriver |
|
· Lint Brush |
|
· Seam Ripper |
|
· Spool Holder (large) |
|
· Spool Holder (small) |
|
· Spool Supporter |
|
· Foot Control |
|
· Power Cable |
|
· Instruction Book |
|
· Hard Machine Cover |