The World’s leading sewing machine manufacturer
01
CoverPro 2000CPX
1200D Professional
4
01. 5 THREAD STITCH A true 5-Thread industrial stitch consists of the two stitches sewn
simultaneously. 2 threads form the chainstitch and 3 threads form the overlock. This stitch is used for
medium to heavyweight woven fabrics and is perfect for garment construction and soft furnishings.
02
9300DX
6234XL
Stitch variations
03
05
07
09
11
04
06
08
10
12
4 4
4
4
4 4
4
4 4 4
4
4
4 4 4
4 4
4
4 4 4
4
4
02. 4-THREAD SAFETY STITCH An overlock stitch that employs two needles. The stitch
stretches without breaking. The second needle thread reinforces the durability and strength of the
stitch, but the stitch retains its elasticity. Excellent for sewing knit & loose tting woven garments.
03. STRETCH KNIT STITCH The same characteristics as the Safety 4-Thread stitch. The Stretch
Knit Stitch uses the differential feed and stitch length settings to prevent knitwear from stretching
while sewing. Common uses are applying ribbing to knit necklines, cuffs or waistbands.
04. 3 THREAD STITCH Three threads lock together on the fabric edge to form a balanced
stitch. The wide overlock stitch is suitable for garment construction on medium to heavyweight
fabrics and knitwear and as an edge nish on single layer fabric. The narrower version of this
stitch is suitable for light to medium fabrics and commonly used for garment construction on
lingerie and as an edge nish on a single layer of fabric.
05. NARROW HEM Three threads form a balanced stitch that is a great narrow edge nish
commonly used for hemming on scarves, napkins and rufes. Also used for garment construction
on undergarments made of lightweight knit fabrics.
06. 2-THREAD STITCH The needle and lower looper threads form an edge nish that is
lightweight and at which is commonly used as an open seam edge on lightweight fabrics.
07. ROLLED HEM – 3 THREAD Three threads form an unbalanced stitch. When the stitch is
formed, the fabric is rolled inside the stitch. Excellent for hemming on medium to lightweight
fabrics and can be used to create decorative pintucks.
08. ROLLED HEM – 2 THREAD Since there are only 2 threads, the result is lighter and ner than
the 3 thread version. This is suitable for fabrics like chiffon and also used for bridal veil edging.
09. STRETCH WRAPPED A stretch stitch that uses two needles and the lower looper.
This stitch provides the maximum stretch: the second needle thread increases the stitches
durability. This stitch is a perfect choice for garment construction on exercise and swimwear.
10. FLATLOCK Three threads form an unbalanced stitch that can be pulled open into a at
seam. The seam resembles the top stitch seen on ready-to-wear sweatshirts and knit sportswear
and is commonly used for garment construction on bulky knitwear or as a decorative accent.
The two thread version is used for construction of under garments and as a hemming technique.
11. BLANKET STITCH An edge nish that uses decorative thread in the needle. The upper
and lower looper threads pull the needle thread so it is visible on both the top and underside
of the fabric. This is an excellent stitch to nish a single layer of fabric like a blanket or felted
scarf or used as a decorative accent.
4
12. TRIPLE COVER HEM This stitch uses three needles and the chain looper to form 3 lines
of what looks like parallel straight stitches. Commonly used for Hem nish, topstitching and
creating belt loops.
5mm
OR
13
2.5mm
4 4
14
4
15
Gathering and many decorative nishes such as pintucks, picot and lettuce-leaf edgings can be created using Janome
overlockers. Fabulous creative and professional results can be achieved with these highly versatile and robust machines.
For further information
Telephone 0161 666 6011 or visit our website
V1015
13. COVER HEM WIDE & NARROW A version of the cover hem that uses two needles
6mm
and the chain looper to form two lines of what looks like parallel straight stitches. Commonly
OR
used for Hem nish, topstitching and creating belt loops. The narrow version of this stitch can
3mm
also be used for creating pin tucks.
14. CHAINSTITCH A 2-thread chainstitch or double chainstitch uses one needle and the
chain looper to form a straight stitch. The chainstitch is stable for stretch fabrics and can be
used for garment construction on woven fabrics to create an open seam allowance, to sew
knitwear together where elasticity is required and to sew on bias tape. This stitch can also be
used to create decorative effects.
15. TOP COVER STITCHES (Triple, Wide and Narrow) A decorative industrial type
topstitch. It uses two or three needles, top cover “hook” and the chain looper to form a cover
hem with loops on both the top and bottom side of the fabric. This stitch is commonly used for
hemming and topstitching on light to medium weight fabrics.This stitch can also be used to
create decorative effects.
We reserve the right to change specications without notice
www.janome.co.uk
Overlocker Models
The World’s leading sewing machine manufacturer
www.janome.co.uk
Model 9300DX Model 6234XL
The 9300DX is a superb introductory level overlocker
offering great value for money. Whilst it is easy to
use, it comes with an instructional DVD to help you
use the wide range of stitch options.
• 3 OR 4 THREAD OVERLOCKING
• EASY ROLLED HEM CONVERSION
• COLOUR CODED EASY THREADING
• LAY IN THREAD TENSION DIALS
• DIFFERENTIAL FEED RATIO 0.5 – 2.2
• RETRACTABLE UPPER KNIFE
• ADJUSTABLE CUTTING WIDTH
• VARIABLE SEAM WIDTH 2 – 5.7MM
• VARIABLE STITCH LENGTH 1 – 4MM
• SNAP-ON PRESSER FEET
• EXTRA HIGH PRESSER FOOT HEIGHT
• ELECTRONIC SPEED CONTROL
• SEWS UP TO 1,500 SPM
• USES STANDARD BALLPOINT NEEDLES
• INSTRUCTIONAL DVD INCLUDED
• GATHERING FOOT INCLUDED
• OPTIONAL ACCESSORIES AVAILABLE
The 6234XL unites ease-of-use with the specialised
function of an advanced overlocker. It has great
build quality and an extensive range of features.
The instructional DVD will help you get the most
from this powerful overlocker.
• 2, 3 OR 4 THREAD OVERLOCKING
• EASY ROLLED HEM CONVERSION
• COLOUR CODED EASY THREADING
• EASY THREADING LOWER LOOPER
• LAY IN THREAD TENSION DIALS
• DIFFERENTIAL FEED RATIO 0.5 – 2.25
• RETRACTABLE UPPER KNIFE
• ADJUSTABLE CUTTING WIDTH
• VARIABLE SEAM WIDTH 2 – 5.7MM
• VARIABLE STITCH LENGTH 1 – 5MM
• SNAP ON PRESSER FEET
• EXTRA HIGH PRESSER FOOT HEIGHT
• ELECTRONIC SPEED CONTROL
• SEWS UP TO 1,500 SPM
• WASTE CHIP & ACCESSORY BOX
• USES STANDARD BALL POINT NEEDLES
• INSTRUCTIONAL DVD INCLUDED
• OPTIONAL ACCESSORIES AVAILABLE
Model 1200D Professional
Model CoverPro 2000CPX
This top of the range machine combines a full featured
overlocker with a cover hem machine which will sew a
top & bottom hem simultaneously to create an industrial
style cover hem. It has a wide range of overlocking,
atlock, blanket and chain stitches and adjusts the tension
automatically for each stitch you select.
• 2, 3, 4 OR 5 THREAD OVERLOCKING
• EASY ROLLED HEM CONVERSION
• 10 BUILT IN STITCH PROGRAMMES
• 20 STITCH VARIATIONS
• SEWS TOP & BOTTOM COVER HEM SIMULTANEOUSLY
• DOUBLE CHAIN STITCH
• COLOUR CODED EASY THREADING SYSTEM
• DIFFERENTIAL FEED RATIO 0.5 – 2.00
• AUTOMATIC TENSION SETTINGS
• VARIABLE SEAM WIDTH 3.5MM – 7.5MM
• VARIABLE STITCH LENGTH 0.5 – 5MM
• AUTO TENSION RELEASE DEVICE
• ADJUSTABLE CUTTING WIDTH
• ADJUSTABLE FOOT PRESSURE
• RETRACTABLE UPPER KNIFE
• LAY IN THREAD TENSION DIALS
• SNAP-ON PRESSER FEET
• EXTRA HIGH PRESSER FOOT HEIGHT
• SAFETY LOCK OUT WHEN PRESSER FOOT RAISED
• ELECTRONIC SPEED CONTROL
• SEWS UP TO 1,300 SPM
• USES ELX 705 NEEDLES
• EXTENSIVE RANGE OF SPECIALITY ACCESSORIES AVAILABLE
With a wide triple cover hem stitch, exclusive free arm
conguration, and Janome’s Seam Tightening System
(STS) to reduce slack in the looper thread, the 2000CPX
is the most advanced dedicated cover hem machine
available. The No puckering Tension Lever Control (TLC)
ensures even the nest of fabrics are perfectly nished.
• 1, 2 OR 3 NEEDLE COVER HEM STITCH
• UNIQUE SEAM TIGHTENING SYSTEM™ (STS)
• 3MM DOUBLE NEEDLE COVER STITCH
• 6MM DOUBLE NEEDLE COVER STITCH
• 6MM TRIPLE NEEDLE COVER STITCH
• DOUBLE CHAIN STITCH
• COLOUR CODED EASY THREADING
• VERTICAL NEEDLE DROP
• VARIABLE STITCH LENGTH 1 – 4MM
• AUTO TENSION RELEASE DEVICE
• DIFFERENTIAL FEED RATIO 0.5 TO 2.25
• CONVERTIBLE FREE ARM
• EXTRA LARGE BED SPACE 143MM X 100MM
• ADJUSTABLE FOOT PRESSURE
• EXTRA HIGH PRESSER FOOT HEIGHT
• SEWS UP TO 1,000 SPM
• USES ELX 705 NEEDLES
• OPTIONAL ACCESSORIES AVAILABLE
Loading...