Jam HX-HP420 User Manual

Where There’s A Jam, There’s A Party!™

www.jamaudio.com

USER GUIDE AND WARRANTY INFORMA TION

HX-HP420

READ UP.

PARTY DOWN.

HEY. HAVE WE SEEN YOU HERE BEFORE?

PACKAGE CONTENTS

Register your headphones at www.jamaudioInformation.com.

about where you bought them and how you’re using them is like gold for the people who make these headphones. Do them a solid, will ya?

	Por manual de instrucciones e información de garantía en
	español visítenos en www.jamaudio.com	User Manual Charging Cord
	There are lots of cool Jam speakersCheck. them all out at	Headphones
	www.jamaudio.com		Packaging doubles
			as carrying case

JUST CHARGE IT

Charging the headphones is so easy you’ve	2. If you want to use the wall outlet, you’ll need to
probably figured it out by now, but just in	pick up a power cord with a Micro USB the
case, you’ve got two options: You can charge	next time you’re at the store, or use any USB
it using your computer or a wall outlet.	AC adapter (DC 5V +/– 0.25V rated current:
1. The cord that came with the headphones	>250mA), including the one for your cell.
—the one with the USB on one end and	Plug it in and your headphones will be ready for an
the Micro USB on the other—is made to	epic night in no time. You should go get ready too!
work with your computer.	They need about 3 hours for 11 hours of party time.

Wall adapter not included

CONTROL YOUR DESTINY…OR AT LEAST YOUR	FEATURES:
HEADPHONES

1.This is the power button, press and hold for 5 seconds to power on. Push it to play, push it again to pause

2.Turn the music up or down (Wait, why would you turn it down?)

3.The power cord goes here

4.Skip back a track or jam on to the next song

5.This light lets you know when Bluetooth is paired with your headphones

6.Check out how much juice is in the battery

5	6	2
	1

4

3

ALLOW US TO SHED SOME LIGHT
	What It Looks Like	What It Means
	Flashing Red	Low Battery
CHARGE	RED (when plugged in)	Char ging
	LED OFF (full charged)	Ready to Party
	Quick Flash BLUE/RED	Pairing Mode
	Slow Flash BLUE	C onnected

BLUETOOTH	®	CONNECTION: IT’S A SETUP

Like any amazing couple, this one starts with a connection —one between your device and the headphone’s Bluetooth.

1.We know you’re probably going to think, “derp” with this one, but we have to say it: Make sure the smartphone, tablet or computer you want to hook up to the headphones has Bluetooth. (There. We got that out of the way.)

2.Turn on the headphones and look for the little blinking light.

3.Do whatever your device needs you to do on(Weits end. don’t know what you’re using. We’re not spies.)

4.Look for Jam Transit Headphones in your device’s Bluetooth list or click YES—whatever pops up on your device—and BAM! you’re connected.

5.Now hit PLAY on your headphones and crank it up—or down if you’re lame.

You’re probably only going to have to do this once, unless your device goes through a major I-just-dropped-it-in-the-pool kind of reboot. The device and Bluetooth will find each other every time just as long as the headphones are set to Bluetooth and your device’s Bluetooth is, you know—on.

If you’re connecting to a computer, you may have some extra steps on that end. You’ll have to get that information from the computer company.

		HELLO? SPEAKERPHONE? YES!
	Depending on your device you may be prompted to enter a	When friends call to interrupt your party of one—and you know
	pairing code. If prompted enter “0000” as the code.	they will—answer the phone without disconnecting from your
	Press and hold the +/– button for 5 seconds to activate pairing	JAM Transit. Yes, that’s right. Your headphones are a
		speakerphone too. How amazing is that?
	mode.

Note: If you turn on your Transit Headphones but haven’t started the party, they will automatically power off after 2 minutes of unpaired inactivity.

Here’s how it works:

1.Make sure your phone and headphones are connected through Bluetooth.