Page 1
BODY STRAIGHTENER
10 TON CAPACITY
USER'S MANUAL
MODEL 852/858
Page 2
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to
handle this product. Do not allow children in the work area.
3. STORE IDLE EQUIPMENT. When not in use , tools and equipment should
be stored in a dry location to inhibit rust. Always lock up tools and equipment
and keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF
ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine
if your judgment of reflexes are impaired while taking drugs. If there is any doubt,
do not attempt to use this product.
5. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses
when using this product. ANSI approved impact eye glasses are available form
Harbor Freight Tools.
6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when
working with this product. Do not wear loose clothing or jewelry as hey can
become caught in moving parts. Wear a protective hair covering to prevent
long hair form becoming caught in moving parts. If wearing a long-sleeve shirt,
roll sleeves up above elbows.
7. DO NOT OVERREACH. Keep proper footing and balance at all times to
prevent tripping, falling, back injury, etcetera.
8.STAY ALERT. Watch what you are doing at all times. Use common sense.
Do not use this product when you are tired or distracted form the job at hand.
9.CHECK FOR DAMAGED PARTS. Before using this product, carefully
check that it will operate properly and perform its intended function. Check
for damaged parts and any other conditions that may affect the operation of
this product. Replace or repair damaged or worn parts immediately.
10.MAINTAIN THIS PRODUCT FOR THE RIGHT JOB. There are certain
applications for which this product was designed. Do not use small equipment,
tools or attachments to do the work of larger industrial equipment, tools or
attachments to do the work of larger industrial equipment, loose or attachments.
Do not use this product for a purpose for which it was not intended.
1.
Page 3
Page 4
Setup for Frontal Collision
3.
Page 5
PARTS
DESCRIPTION
QTY
DESCRIPTION QTY
01 MAIN BEAM 1 15 SPINDLE 2
02 TILTING SUPPORT 1 16 SNAP-RING"C" 2
03 SPINDLE 1 17 MULTI-POSITION ANCHOR POST 1
04 SNAP-RING"C" 3 18 STOP BLOCK 1
05 PIN 1 19 PIN 2
06 POST 1 20 SUPPORT STAND 2
07 BOLT 3*4"X7" 1 21 CROSS TUBE 1
08 SPRING WASHER 1 22 UNDERBODY SUPPORT CLAMPS 2
09 NUT 3/4" 1 23 PULL CLAMPS 2
10 LOCK PIN 1 24 PULL RING 2
11 COTTER PIN 3 25 6"X3/8"CHAIN 2
12 SUPPORT 1 26 3/8 HOOK 2
13 SPINDLE 1 27 10 TON HYDRAULIC UNIT 1
14 10 TON RAM 1
PARTS LIST
BODY STRAIGHTENER
26
26
24
24
23
23
25
25
19
18
17
19
04
13
04
03
07
05
04
16
12
14
09
08
11
15
15
16
16
06
22
22
20
20
21
27
1
10
2
NO
PARTS
NO
4.
MODEL 852
Page 6
PARTS
NO
DESCRIPTION QTY
PARTS
NO
DESCRIPTION QTY
02B MAIN BEAM 1 28 ANCHOR POST UPPER BRACKET 1
03A FRAME CANNULA 1 29 SPINDLE 1
03B FRAME CANNULA 1 30 COTTER PIN 5
04 SPRING WASHER 3 15/16" 6 31 SNAP-RING"C" 1
05 BOLT 3 15/16"x 11 13/16"L 6 32 BOOM 1
06 BOLT 1/2"X3/4"L 2 33 BOLT 3/4"X46 1/4"L 1
07 EXTENSION BOOM 2 34 NUT 3/4" 2
08 CASTER ASS'Y 2 35 BOOM EXTENSION 1
09 BOLT 5/16"X3/4L 8 36 BOLT 5/8"X36 5/8" 1
10 SPRING WASHER 3 1/8" 8 37 NUT 5/8" 1
11 NUT 5/16" 8 38 HOOK AND CHAIN 1
12 FRONT WHEEL 2 39 BOLT 1/2"X30 5/16 1
13 BUSHING 1 40 NUT 1/2" 3
14 BOLT 3 1/8"X39 3/8"L 1 45 SUPPORT STAND 2
15 NUT 3 1/8" 1 49 CROSS TUBE 1
16B POST 1 50 UNDERBODY SUPPORT CLAMPS 2
17 SPINDLE 1 51 PULL CLAMPS 2
18 SNAP-RING"C" 3 52 PULL RING 2
19 LOCK PIN 1 53 6"X3/8"CHAIN 2
20 CYLINDER 2 54 3/8"HOOK 2
21 ADAPTER 2 55 10 TON HYDRAULIC UNIT 1
22 SPINDLE 4 56 TILTING SUPPORT 1
23 SNAP-RING"C" 4 57 BOLT 3/4"X2 3/8"L 1
24 ADAPTER 2 58 SPRING WASHER 1
25 MULTI-POSITION ANCHOR POST 1 59 LOCK PIN 1
26 STOP BLOCK 1 60 SUPPORT 1
BODY STRAIGHTENER W/2TON CRANE
53
53
54
54
52
52
51
51
05
04
05
04
05
04
03A
10
11
07
09
08
25
26
27
29
30
27
31
02B
15
07
08
05
04
05
04
06
05
04
03B
19
59
57
18
17
18
34
58
60
16B
21
24
22
23
61
18
22
23
30
34
33
23
22
36
37
39
40
38
55
50
50
45
45
56
49
14
13
12
35
28
24
32
2020
20
5.
MODEL 858
Loading...