Jabra Speak 510 User Manual
Jabra
Speak 510
User manual
GN Audio A/S
© 2015
registered trademark of
included herein are the property of their respective owners.
The Bluetooth
Bluetooth SIG, Inc. and any use of such marks by
. All rights reserved. Jabra® is a
GN Audio A/S
®
word mark and logos are owned by the
. All other trademarks
GN Audio A/S
is under license.
Made in China
MODEL: PHS002W
Declaration of Conformity can be found on
www.jabra.com/doc
Contents
1. Welcome ...........................................4
2. Speaker overview ............................5
2.1 Turn on the jabra speak 510
2.2 Charging the Jabra Speak 510
3. Connecting ....................................... 7
3.1 Connect to Jabra Link 370
3.2 Connect to mobile device (Bluetooth)
3.3 Connect to Bluetooth headset 10
4. How to use the Jabra Speak 510 11
4.1 Multiple call handling
4.2 Switch between bluetooth devices
4.3 Voice guidance on/o
4.4 Smart button
5. Software ..........................................15
5.1 Jabra direct
5.2 Update Jabra Speak 510 firmware
6. Support ............................................16
6.1 FAQ
6.2 How to care for your Jabra Speak 510
ENGLISH
3
1. Welcome
Thank you for purchasing the Jabra Speak 510.
We hope you will enjoy it!
JABRA SPEAK 510 FEATURES
Answer, end, reject and mute calls.
Connect to computer via USB or Jabra Link 370.
Connect wirelessly to mobile device via
Bluetooth.
Portable design.
Omni-directional microphone.
Wideband audio for exceptional sound
quality.
LED, audio indicators and voice guidance.
Up to 15 hours talk time.
Interact with your voice assistant (phone
dependent) or speed dial with the one-touch
Smart button* (must be enabled in Jabra
Direct).
*Newer Speak 510 variants (with the Smart button) have a
Ver. ID beginning with D, or later. Older Speak 510 variants
(without the Smart button) have a Ver. ID beginning with A,
B, or C.
Newer Speak 510+ variants (with the Smar t button) have a
Ver. ID beginning with F, or later. Older Speak 510+ variants
(without the Smart button) have a Ver. ID beginning with A,
B, C, or D.
The Ver. ID can be found on the bottom of the Speak 510.
ENGLISH
4
2. Speaker overview
Mute microphone
Bluetooth
Volume
down
Answer call
On/O
*Newer Speak 510 variants (with the Smart button) have a
Ver. ID beginning with D, or later. Older Speak 510 variants
(without the Smart button) have a Ver. ID beginning with A,
B, or C.
Newer Speak 510+ variants (with the Smar t button) have a
Ver. ID beginning with F, or later. Older Speak 510+ variants
(without the Smart button) have a Ver. ID beginning with A,
B, C, or D.
The Ver. ID can be found on the bottom of the Speak 510.
Battery level
Volume up
Smart button
End/reject call
Supplied with
Jabra Speak 510+ only
Jabra Link 370
ENGLISH
*
5
2.1 Turn on the jabra speak 510
Plug the Jabra Speak 510 USB cable into any
available USB port on your computer, or
Press and hold (2 secs) the On/Off button to
turn the Jabra Speak 510 on or off.
2.2 Charging the Jabra Speak 510
ENGLISH
Plug the Jabra Speak 510 USB cable into any
available USB port on your computer to charge
the battery. The battery light is red when
charging, and green for 1 minute when fully
charged.
6
Loading...