Jabra JX20 PPURA User Manual

G e t t i n G s t a r t e d
1
enGlish
JABRA JX20 PURA
enGlish
THANK YOU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
enGlish
JABRA JX20 PURA
thank you
Thank you for purchasing the Jabra JX20 PURA headset. We hope you enjoy it! This user manual will get you started and ready to make the most of your headset.
about your Jabra JX20 Pura
JX20 PURA headset:
1
Light indicator (LED)
2
Charging socket
3
On/o switch (rotate earpiece 90 degrees)
Fig. 1
JX20 PURA deskstand:
1
Light indicator
2
Charging socket
Fig. 2
Eargel
Earhooks
Fig. 3
1
3
4
2
6
2
Accessories:
5
1
4
Answer/end buttom
5
Volume up & down
6
Earhook connection
3
enGlish
JABRA JX20 PURA
What your headset does
Your Jabra JX20 PURA lets you do all this:
Answer calls
End calls
Reject calls*
Voice dialing*
Last number redialing*
Call waiting*
Put call on hold*
Multipoint - connect to two Bluetooth devices at the same time
Specications:
Up to 6 hours talk time/standby time up to 200 hours
Rechargeable battery with charging option from AC power supply, PC via USB cable, or deskstand
Less than 12 grams
Operating range up to 10 meters (approx. 33 feet)
Headset and hands-free Bluetooth proles
Bluetooth specication (see glossary) version 2.0
GettinG started
You should follow three steps before using your headset:
1. Charge your headset.
2. Activate Bluetooth on your mobile phone (refer to the manual for your mobile phone).
3. Pair your headset to your mobile phone.
The Jabra JX20 PURA is easy to operate. The answer/end button on the headset performs dierent functions depending on how long you press it.
* Phone dependent
4
enGlish
JABRA JX20 PURA
Instruction Duration of press
Tap Press briey
Press Approx. 1 seconds
Press and hold More than 3 seconds
CharGe your headset
Make sure that your Jabra JX20 Pura headset is fully charged before you start using it. Use the AC adapter to charge from a power socket, or charge directly from your PC with the USB cable provided.
Please note: The lifetime of the battery will be signicantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.
1. Charging from your deskstand:
• Connect your USB cable/AC adapter to the deskstand. Place your JX20 Pura headset in the deskstand as shown in g. 2.
2. Battery status indicators:
• When the headset is charging, it will indicate the amount of power in the battery.
Charging your headset from AC adapter or USB cable:
What you see What this means
LED ashes once
0-25% charged
LED ashes twice
25-50% charged
LED ashes three times
50-75% charged
LED ashes four times 75%-100% charged
LED soild white Fully charged
5
enGlish
JABRA JX20 PURA
Charging your headset from your deskstand:
What you see What this means
LED o No device in deskstand
1st. LED solid Device in deskstand
1st. LED solid, 2nd. LED pulsing
0-25% charged
1+2 LED solid, 3rd. LED pulsing
25-50% charged
1+2+3 LED solid, 4th. LED pulsing
50-75% charged
1+2+3 +4 LED solid, 5th. LED pulsing 75-100% charged
All LED´s solid Fully charged
Check Battery status:
When you are not in a call, tap either volume button.The LED will ash in accordance with the AC adapter/USB charger sequence above.
turninG your headset on and off
Gently turn the earpiece 90° clockwise to turn on the headset (see g. 1).
Gently turn the earpiece 90° anti-clockwise to turn o the headset (see g. 1).
PairinG it With your Phone
The rst time you turn on your Jabra JX20 Pura it will automatically enter pairing mode. In this case skip directly to point 2 below. When pairing with a second device, or if you need to pair manually, start with point 1 below.
1. Put the headset in pairing mode:
• Turn the headset on.
• Press and hold the answer / end button until the LED on the back shines continuously.
Loading...
+ 11 hidden pages