Jabra DRIVE User Manual

JABRA® DRIVE

USER MANUAL

Contents

THANK YOU....................................................2

ABOUT YOUR JABRA DRIVE ....................................2

WHAT YOUR JABRA DRIVE CAN DO.............................3

HOW TO PRESS THE BUTTONS .................................4

WHAT THE LIGHT MEANS ......................................4

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CHARGING YOUR JABRA DRIVE ................................5

TURNING YOUR JABRA DRIVE ON AND OFF ....................6

PAIRING YOUR JABRA DRIVE WITH YOUR PHONE ...............6

CONNECTING WITH YOUR PHONE AUTOMATICALLY............7

PLACING JABRA DRIVE IN YOUR VEHICLE.......................8

ADDITIONAL FEATURES........................................8

HOW TO HANDLE CALLS FROM A SINGLE PHONE ..............9

HOW TO HANDLE CALLS FROM TWO MOBILE PHONES........10

TROUBLESHOOTING & FAQ ...................................11

NEED MORE HELP? ...........................................12

TAKING CARE OF YOUR JABRA DRIVE..........................13

GLOSSARY ....................................................14

english

JABRA DRIVE

1

tHAnK YoU

A

B

C

D

E

F

G

Thank you for purchasing the Jabra DRIVE Bluetooth® in-car
speakerphone. We hope you enjoy it! This instruction manual
will get you started and ready to make the most of your in-car
speakerphone.

ABoUt YoUR JABRA DRIVe

A Status light

B Answer/end button

C Volume control

D Integrated Visor Clip

E Microphone

F On/o switch

G Micro USB charging connector

JABRA DRIVE

english

2

WHAt YoUR JABRA DRIVe CAn Do

Your Jabra DRIVE lets you do all this:

- Answer calls

- End calls

- Reject calls*

- Voice dialing*

- Last number redial*

- Mute

- Third party calling*

- Adjust volume

- Transmit mobile music, podcasts and directions from a GPS app

- Advanced Multiuse™ – Stay connected to two active Bluetooth
devices at the same time

Specications

- Talk time up to 20 hours/Standby time up to 30 days

- Charging time approximately 2 h. 30 min.

- Digital sound enhancement via DSP technology

- Noise cancellation through DSP

- Echo cancellation through DSP

- A2DP (Advanced Audio Distribution Profile) for transmitting
music, podcasts and directions from a GPS app on your phone

- Jabra Status Light (battery status, call status, connection status)

- Size: H104 mm W56 mm D18 mm

- Weight 100 grams

- Operating range up to 10 meters (approximately 33 feet)

- Supported Bluetooth profiles: HFP, HSP, A2DP

- Bluetooth specification version 3.0

- e-SCO for enhanced audio quality

- Rechargeable battery with charging option from car charger or
via USB cable

english

* Phone dependent

JABRA DRIVE

3

HoW to PRess tHe BUttons

Instruction Duration of press

Tap Press briey

Double Tap 2 quickly repeated taps

Press Approx. 1-2 seconds

Press and hold Approx. 5 seconds

WHAt tHe LIGHt MeAns

Status Light Speakerphone Status

The status light behind the
answer/end button ashes
rapidly blue

The status light turns solid
blue and goes into standby
light mode

The status light ashes blue

nd

second

every 2

The status light ashes blue
every second

The status light turns solid
blue

The status light is ashing red There is less than 30 min. talk

The status light turns red The unit is charging

The status light turns green Fully charged or the charging

Pairing mode

Connected

Standby/Idle

Incoming call

Active call

time left

level is between 70% and fully
charged

english

JABRA DRIVE

4

GettInG stARteD

You should follow three steps before using your speakerphone

1 Charge your Jabra DRIVE

2 Turn your Jabra DRIVE on

3 Pair your Jabra DRIVE with your mobile phone

The Jabra DRIVE is easy to operate. The answer/end button on the
speakerphone performs dierent functions depending on how
long you press it.

CHARGInG YoUR JABRA DRIVe

Make sure that your speakerphone is fully charged for two hours
before you start using it.

Use the USB cable to connect Jabra DRIVE to the car charger. Plug
the car charger into your car’s power outlet. The status light will
light up red while charging. When fully charged the status light
turns green. Jabra DRIVE can be charged outside your car by only
using the USB cable. Use only the charger provided in the box - do
not use chargers from any other devices as this may damage your
speakerphone.

Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month.

english

JABRA DRIVE

5

tURnInG YoUR JABRA DRIVe on AnD oFF

Slide the on/o switch to turn the speakerphone on or o.

Sleep mode and Auto OFF

When not connected to a phone, the speakerphone turns o
automatically after 10 minutes. Use the on/o switch to turn the
speakerphone on again.

On/O

PAIRInG YoUR JABRA DRIVe WItH YoUR PHone

Jabra DRIVE is connected to a mobile phone using a procedure
called ‘pairing’. By following a few simple steps, a phone can be
paired with the speakerphone in a matter of minutes.

1 Activate Bluetooth® on your mobile phone

Please check the manual for your mobile phone.

2 Put the speakerphone in pairing mode

When you turn on your Jabra DRIVE for the rst time, the
speakerphone will automatically start up in pairing mode – i.e.
it can be detected by your phone. When the speakerphone is in
pairing mode the status light will ash rapidly blue.

3 Set your Bluetooth® phone to ‘search’ for the JABRA DRIVE

Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to search for devices. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth®’ menu on your phone and selecting the
option to ‘search’ or ‘add’ a Bluetooth® device.*

english

* Phone dependent

JABRA DRIVE

6

4 Your phone will nd the Jabra DRIVE

Your phone will nd the speakerphone under the name “JABRA
DRIVE”. Your phone then asks if you want to pair with the JABRA
DRIVE. Accept by pressing ‘Yes’ or ‘OK’ on the phone and/or
conrm with the passkey or PIN = 0000 (4 zeros). Your phone will
conrm when pairing is complete.

CONNECTIVITY

MobilSurf

BLUETOOTH

Infrared port
Wap options
Synchronization
Networks

SELECT

DEVICES FOUND

Jabra DRIVE

SELECT

Jabra DRIVE

Passkey:
****

OK

HANDSFREE

Jabra DRIVE
added.

The handsfree is
now ready for use

SELECT

Manual pairing mode

If you wish to use the speakerphone with a dierent phone, or
if the pairing process was interrupted, you can manually set the
speakerphone to pairing mode.

Turn the speakerphone on. Press and hold the answer/end button
for approximately 5 seconds until the status light stars blinking
rapidly blue. Then repeat steps 2. and 3. in the above pairing
guide.

ConneCtInG WItH YoUR PHone AUtoMAtICALLY

Pairing is only needed the rst time a speakerphone and phone
are used together. When the speakerphone and phone have
been paired once they will automatically connect when the
speakerphone is on and Bluetooth® is activated on the phone. The
speakerphone can be used when it is “connected” to the phone. If
the devices are paired, but do not immediately connect, tap the
answer/end button.

english

JABRA DRIVE

7

PLACInG JABRA DRIVe In YoUR VeHICLe

The Jabra DRIVE sits discreetly and conveniently on the sun visor
using the integrated metal clip. The product can be easily taken
on and o the sun visor. For optimal sound quality place the Jabra

DRIVE right in front of you and speak directly into the speakerphone.

ADDItIonAL FeAtURes

Play music and GPS directions*

Make sure that the speakerphone and mobile phone are
connected. When you play music or GPS application directions
from your mobile phone it will automatically transfer to your
speakerphone. If your phone does not allow this feature, press the
answer/end button to transfer the music to the speakerphone.
Music or GPS directions will automatically be paused when you
have an incoming call. When the call is ended it will start playing
again.

Easy Voice Guidance**

- Easy voice guidance informs you about your connection and
low battery status.

- Connected is announced when the in-car speakerphone
reconnects with your phone.

- Low battery is announced every 10
30 min. talk time on your Jabra DRIVE.

Advanced Multiuse™

- Jabra DRIVE can be connected to two mobile devices at the
same time. To learn more about Advanced Multiuse™ please go
to the HOW TO HANDLE CALLS FROM TWO MOBILE PHONES
section

th

min when there is less than

english

* Phone dependent
** Available ONLY in English

JABRA DRIVE

8

HoW to HAnDLe CALLs FRoM A sInGLe PHone

Function How to perform

Single call

Answer or end a call Tap the answer/end button

on your speakerphone to
answer or end a call

Make a call The call will automatically

transfer to your
speakerphone*. If not tap the
answer/end button

Reject a call* Double tap the answer/end

button to reject the incoming
call

Redial last number* Double tap the answer/

end button when the
speakerphone is on and not
used

Mute Long press the volume down

button. A sound will indicate
that the speakerphone is
on mute every 10 seconds
until the speakerphone is
un-muted

Un-mute Long press the volume

down button. A short sound
will indicate that your
speakerphone is un-muted

Adjust volume Tap volume + or volume- to

adjust the volume level. A
short sound will indicate
when the volume level is at its
highest or lowest limit

english

* Phone dependent

JABRA DRIVE

9

Hold active call Press the answer/end button

Transfer an active call from
your phone to Jabra DRIVE

Three way call (Another incoming call)

Release active-accept
incoming call

Hold active/accept incoming Press the answer/end button

Reject incoming call Double tap the answer/end

Three way call (The other call is on hold)

Release active/activate held Tap the answer/end button

Hold active and activate
held call

Release held call Double tap the answer/end

Tap the answer/end button or
press it for a long time

Tap the answer/end button

button

Press the answer/end button

button

HoW to HAnDLe CALLs FRoM tWo MoBILe PHones

Function How to perform

Calls on two phones (One active call – the other phone is
ringing)

Release active/accept
incoming call

Reject incoming call Double tap the answer/end

Hold active/accept
incoming***

Tap the answer/end button

button

Press the answer/end button

english

***Active calls on the two connected phones – other phone’s call is on hold

JABRA DRIVE

10

Function How to perform

Release active/activate held Tap the answer/end button

Hold active and activate
held call

Release held call Double tap the answer/end

Press the answer/end button

button

tRoUBLesHootInG & FAQ

I hear crackling noises

Bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device. It
is designed for the speakerphone and the connected device to
be used within 33 feet (10 meters) of each other, with no major
objects in the way (walls, etc.).

I cannot hear anything in my speakerphone

- Increase the volume in the speakerphone.

- Ensure that the speakerphone is paired to a device that is
playing.

- Make sure your phone is connected to the speakerphone by
tapping the answer/end button.

I am having pairing problems

- You may have deleted your speakerphone pairing connection
in your mobile phone. Follow the pairing instructions.

I want to reset the pairing list in my speakerphone

The speakerphone registers a list of up to 7 mobile phones. To
remove the list:

1) Put your Jabra DRIVE in the pairing mode by long press on the
answer/end button;

2) The press Volume down button while holding your finger on
the answer/end button.

A beep and a purple ash of the status light indicate the list was
removed from the speakerphone memory. The next time you
power on, the speakerphone will go into pairing mode as the rst
time you powered your new Jabra DRIVE on.

english

JABRA DRIVE

11

Will the Jabra DRIVE work with other Bluetooth equipment?

- The Jabra DRIVE is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile.

I cannot use Reject call, call on hold, Redial or voice dialing

- These features are dependent on the ability of your phone to
support a hands-free prole. Even if the hands free prole is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.

Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra DRIVE with 2 mobile
phones.

neeD MoRe HeLP?

1. Web: www.jabra.com

(for the latest support info and online User Manuals)

2. E-mail:

Deutsch [e-mail]
English [e-mail]
Español [e-mail]
Français [e-mail]
Italiano [e-mail]
Nederlands [e-mail]
Polska [e-mail]
Scandinavian [e-mail]
 [e-mail]
Information: [e-mail]

english

JABRA DRIVE

12

3. Phone:

Belgique/Belgie 00800 722 52272
Danmark 70 25 22 72
Deutschland 0800 1826756
Die Schweiz 00800 722 52272
España 900 984572
France 0800 900325
Italia 800 786532
Luxembourg 00800 722 52272
Nederland 0800 0223039
Norge 800 61272
Österreich 00800 722 52272
Polska 0801 800 550
Portugal 00800 722 52272
Suomi 00800 722 52272
Sverige 020792522
United Kingdom 0800 0327026
 [phone]
International 00800 722 52272

tAKInG CARe oF YoUR JABRA DRIVe

- Always store the Jabra DRIVE with the power off and safely
protected.

- Avoid storage at extreme temperatures (above 45°C/113°F
– including direct sunlight – or below -10°C/14°F). This
can shorten battery life and may affect operation. High
temperatures may also degrade performance.

- Do not expose the Jabra DRIVE to rain or other liquids.

english

JABRA DRIVE

13

GLossARY

1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords
over a short distance approx. 33 feet (10 meters). Get more
information at www.bluetooth.com.

2. Bluetooth profiles are the different ways that Bluetooth
devices communicate with other devices. Bluetooth phones
support the headset profile, the hands-free profile or both. In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.

3. Pairing creates a unique and encrypted link between two
Bluetooth devices and lets them communicate with each other.
Bluetooth devices will not work if the devices have not been
paired.

4. Passkey or PIN is a code that you enter on your mobile phone
to pair it with your Jabra DRIVE. This makes your phone and
the Jabra DRIVE recognize each other and automatically work
together. The passkey for all Jabra products is 0000.

5. Standby mode is when the Jabra DRIVE is passively waiting
for a call. When you ‘end’ a call on your mobile phone, the
speakerphone goes into standby mode.

english

Dispose of the product according
to local standards and regulations.

www.jabra.com/weee

JABRA DRIVE

14

© 2011 GN Netcom US, Inc. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth
mark and logos are owned by the Bluetooth SIG, Inc. and any use

®

word

of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).

© 2011 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth
mark and logos are owned by the Bluetooth SIG, Inc. and any use

®

word

of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).

MADE IN CHINA
TYPE: HFS004
FCC ID: XXXXXXX
IC: XXXXXXXX

www.jabra.com

REV A