6. MAINTENANCE AND CLEANING---------------------------------------------------------------------------11
TECHNICAL SERVICE MANUAL ICE STORAGE BIN
WITH CART
1. INTRODUCTION
This document describes the installation procedure for the ice storage bin in order to effortlessly store
and dispense ice.
The instructions in this manual are applicable for the SCD900, SCD1400 and SCD1800 models.
These storage units are compatible with ITV ice makers and are suitable for all types of ice. The
purpose of ice storage bins with carts is to store the ice produced to satisfy the establishment's needs
easily and ergonomically for users.
SCD-900 SCD-1400 SCD-1800
Carts have been integrated to improve and make the transport of ice easier. They make it possible for
users to transport ice to the desired location comfortably and with minimal effort.
1.1 Warnings
Before installing and operating the machine, please read this manual carefully and follow
the instructions herein to ensure proper installation and smooth operation.
It is important to keep this manual for future reference.
Any use of the product which is not for the storage and transport of ice will be considered as
inappropriate.
Modifying or attempting to modify this product, apart from voiding the warranty, is extremely
dangerous.
To ensure the efficiency and proper operation of this product, it is vital to follow the
instructions in this manual, particularly with regard to maintenance and cleaning.
Do not attempt to repair it yourself. Any work by unqualified persons, apart from being
dangerous, can result in damage to the product. In case of a malfunction, contact your
distributor. It is advisable to always demand original spare parts.
TECHNICAL SERVICE MANUAL ICE STORAGE BIN
WITH CART
The machine should not be used in the open air or exposed to the rain.
This product is not designed for use by persons (including children) with impaired physical,
sensory or mental capacities, or who lack experience or knowledge, except if they have had
supervision or instruction in the use of the device from a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device.
2. RECEIPT OF THE MACHINE
Visually inspect packaging before removing it. In case you see any damage, make the pertinent report
to the transport company.
To check whether the machine has been damaged, UNPACK IT IN THE PRESENCE OF THE
HAULIER and make a record—on the delivery receipt or on a separate document—of any damage that
the machine may have suffered. Since 1 May 1998, ITV has complied with European regulations on the
management of Packaging and Packaging Waste.
It is important to always record the machine and model number. This number is marked in three places:
Packaging
There is an external label with the manufacturer’s serial number.
Exterior of the machine
On the back, on a label that is identical to the front.
Name plate
CAUTION: THE PACKAGING ITEMS (PLASTIC BAGS, CARDBOARD BOXES AND WOODEN
PALLETS), MUST NOT BE LEFT WITHIN REACH OF CHILDREN AS THEY ARE A POTENTIAL SOURCE OF
DANGER.
TECHNICAL SERVICE MANUAL ICE STORAGE BIN
WITH CART
3. INSTALLATION
3.1 Unpacking.
To unpack the product, it is advisable to follow the steps below:
Cut away the plastic packaging.
Remove the corner protectors. To do this, cut the straps holding them and take out the
ice paddle found on top of the carts.
Cut the adhesive strips holding the carts, and take out the carts from under the ice
storage bin. The wheels of the cart should have been previously unlocked.
Open the lids of the carts and check that there are two bags inside with items within
them.
Note: The items that should be inside the bags are: two ice scoops to get ice, a drain hose and
this manual.
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.