Isotech I-Cal Easy Data sheet
93
SOLUTIONS FOR PRIMARY & SECONDARY LABORATORIES
|
Calibration Software
Easy
g
Fully Automatic Calibration
g
Design and Print Certificates
g
Calculate Coefficients
g
Prints PRT and TC tables
g
Supports more equipment
g
Try the full version free for 30 days
Use I-Cal Easy to automate sensor calibration, enter up
to 20 calibration points and let the software set the bath,
wait for stability and log the data automatically. Choose
the stability criteria and how many points to record at
each calibration temperature. Automatic temperature
calibration the easy way.
I-Cal Easy lets you use a built-in template or design your
own certificate. Add text, data fields and graphics on
single or multiple pages, then publish the calibration data
to the certificate. Do you want to include or calculate
coefficients? Then drag your data to the ITS-90 or
Calender Van Duesen calculators. For thermocouples
use the powerful regression calculator to fit error curves.
I-Cal Easy
Other systems have limited the user with a built-in
template and the need to pay extra for any changes, with
I-Cal Easy just build in your own certificate in minutes!
I-Cal Easy supports the TTI-7 and
CALISTO 2250S
ISOCAL-6
!
Read Handbook before Use
Not for use in Hazardous Areas
Check Supply Voltage
TTI
Selector
Switch
System Connections
0
A
5
ZERO
1
B
6
TRIG
2
DIFF
7
+1
3
SENS
8
-1
4
UNIT
9
AVE
+/-
RESN
÷2
KYB
MATH
CLE
OPT
OK
CAL
CHG
SCAN
ON
OFF
LINE FAST
TTI-7
TC/RTD THERMOMETER
CU
CU+
CU-
CU
CU+
CU-
TC INPUTS
RTD INPUTS
A0 A0
A: Pt100 R0 = 100.000 A = 138.50 4 WIRE
R = 138.50 Ohm +I BUSY
Run
+ 100.000 ∞C
Build an automatic calibration
system with I-Cal Easy
The number of sensors that can be calibrated depends upon the
equipment used. Calibrate up to 16 sensors with two switch boxes,
expandable to 32.
Isotech Dry Blocks, Liquid Baths and
Calibration Furnaces. Additional
support for other and third party
instruments is available, contact
Isotech for details.
I-Cal Easy provides a powerful but
easy to use automatic calibration
system. A graphical setup lets you
drag and drop instruments and
equipment onto the appropriate PC
port - no need to create config files.
In addition to the comprehensive
manual balloon tips guide you as to
the operation of each control. Once
familiar with the system this balloon
help feature can be turned off.
The criteria for stability can be set to
suit all types of equipment; Dry Blocks,
Liquid Baths and High Temperature
Furnaces. Once the system is stable
choose how many measurements to
take at each calibration point and
have the average value appear on
the certificate. Create one or multiple
page certificates, as many as
required to suit different customers
and different types of calibration,
Thermocouple, Industrial PRTs and
SPRTs. Drag and drop data and text
fields onto the certificate, link to logos
and other graphic elements.
The in-built calculator will calculate
coefficients for both IEC 751, ITS-90
and for thermocouples you can
choose what order of regression to fit
an error curve. Try the demo version
and see how easy it is to drag data
to the calculator and export the results
straight to a certificate.
Judge for yourself how this compares
to any other software. The demonstration
version will run without restriction for
30 days and enable you to learn how
to use I-Cal Easy and save time by
rapidly producing certificates to your
own requirements. Try it and see why
we are confident that I-Cal Easy is
the market leader.
System Requirements
Computer Desktop or Notepad PC
Operating System Windows 98/2000/XP
Display 800 X 600 / 16 bit display
I-Cal - Supported Camera Check with Isotech for supported models
Serial Ports A maximum of three ports are required, one for the dry
(1024 X 768 recommended)
block, one for the TTI and one for the Switchboxes
(Two Switchboxes can be operated from a single port)
Note:
Available in different languages Spanish and Chinese currently available.
94
SOLUTIONS FOR PRIMARY & SECONDARY LABORATORIES
|
Loading...