Iriver Story HD User Guide
STORY HD
USER GUIDE
Contains Reader®
Mobile technology by
Adobe Systems Incorporated
CONTENTS
01
Getting Started
Components
Device Controls
Using the keyboard
Power Management
Connecting the Story HD
Using Adobe Digital Editions
Using Google eBooks
02
Using Story HD
Home Screen
Viewing Books
Setup
03
04
05
06
08
11
13
15
18
22
03
Other Information
Important Safety Information
Troubleshooting
DISCLAIMER
Copyrights
Certification
Registered Trademark
Exemption
24
26
27
28
39
39
39
Components
In the box you will find your StoryHD, the Basics of Story HD and the USB
cable for charging.
Story HD
The Basics
& Product Warranty
USB Cable
The Basics: Explains basic functions of your Story HD.
Product Warranty: Please keep this in a safe place for use during any
warranty repairs.
USB Cable: Connects the device to the computer.
Getting Started
03
Device Controls
The specific wording on the exterior of the device may vary slightly
depending on your device's model.
1
2
3
4
EPD (Electronic
1
Paper Display)
SD Card Slot
2
USB Port
3
Power
4
Getting Started
04
The EPD makes you feel as if you are
reading a paperback book.
Insert a SD card to view and would open
the files on the card.
Connect to the computer to transfer files or
connect to the computer recharge.
Turn off the power by sliding and holding
Switch to standby mode by sliding briefly
Using the keyboard
1 3 6542
11 12 13 14 15 16 17
7 8
9
10
HOME
1
BACK
2
Left arrow
3
Down arrow
4
Up arrow
5
Right arrow
6
ENTER
7
OPTION
8
DEL
9
ENTER
10
Shift
11
SYM(Symbol Key)
12
Text size
13
Rotation
14
Space
15
BACK
16
Arrow keys
17
Getting Started
05
Move to the home screen.
Move to the previous screen.
Move to the previous page.
Move down the list.
Move up the list.
Move to the next page.
Confirm and execute the selected item.
Display the Option window.
Delete typed characters and selected items.
Confirm and execute the selected item.
Enter capital letters.
Displays number and symbol keyboard.
Adjust text size of screen.
Rotate page orientation.
Add space / Mark as a favorite.
Move to the previous screen.
Navigate in four directions.
Power Management
Power on/off
1. Slide the [Power] tab in the direction of the arrow and the device
will boot up.
2. When the Story HD is on, slide the [Power] tab in the direction of
the arrow and hold for 3 seconds to power down.
Story HD supports an automatic power-saving feature to minimize battery
consumption. You can customize Auto Power Off and Auto Sleep settings
by going to Power Settings in Option Menu, the device will be automati-
cally turned off when keys are not operated for a specified time. (Refer to
page 23)
Switching to Sleep Mode
1. Sliding the [Power] tab when the device is on will switch the
product to Sleep Mode.
2. Sliding the [Power] tab again will terminate Sleep on.
Getting Started
06
Using the Reset Function
1. If the product is unresponsive to key presses, sliding and holding
the Power tab for more than 20 seconds will reset the product.
Current time and memory data will be preserved even after using the reset function.
To avoid damaging the memory, please do not use the reset function while
the device is in use.
Charging the battery by connecting to your computer
1. Turn on the computer and connect the device with your computer.
The internal battery on the device will charge automatically.
Using the battery properly - Page Turn Time: Max. 14,000 page views
Do not use any cables other than the USB cable provided with the
product. It could cause the product to malfunction.
Please verify that the product is connected to a high-powered, USB 2.0
port. Some low-powered USB ports built into certain peripheral devices,
such as certain types of keyboards and USB hubs without internal power
may not provide in sufficient amount power to charge the product. If the
computer is switches to Sleep Mode, the product may not charge.
Charge and store the product only at room temperature.
Please do not expose the device to extreme temperatures while recharging.
The rechargeable battery is a consumable product and the available usage
time of the fully charged battery diminishes over time.
The battery will be fully charged on the device within about 4.5 hours.
(Based on a fully discharged battery that is and powered off).
The Charging times may vary if the device is used during recharge.
If the battery has been completely discharged and has not been used for
a long time period of time, the product will not boot until it has been
charged for at least ten minutes.
Getting Started
07
Connecting the Story HD
Connecting to your computer
1. Turn on the device and computer.
2. Upon connecting the device to your computer, you will see the
screen where you can select the connection mode.
- Charge Battery: The device is currently being charged.
- Connect Removable Disk: The connection between the device and
a computer has been established for file transfer.
Power On
Do not use any other cables other than the USB cable provided with the
product. It could cause the product to malfunction.
For a successful computer/USB connection, please disable all computer
or device functions. Please verify that the product is connected to a
high-powered, USB 2.0 port. Some low-powered USB ports built into
certain peripheral devices, such as certain types of keyboards and USB
hubs without internal power may not provide sufficient amount power to
charge the product.
Disconnecting the device
1. Safely disconnect the product from your computer by clicking the
icon on the taskbar of the computer screen.
2. Confirm that the device is disconnected by clicking [Confirm].
Getting Started
08
Depending on the operating system, (Windows XP, Macintosh OSX, etc.)
the icon may be hidden from the taskbar. Hidden icons can be displayed
by clicking the indicator.
If programs such as Windows Explorer or Windows Media Player are
being used, the product may not be able to disconnect safely.
Make sure that the product is safely disconnected using the above steps
after all the active application programs are closed. If safe disconnection fails,
please try again later. Failure to safely disconnect could result in data loss.
Transferring files to the Device
1. After selecting files/folders to copy from your computer, drag and
drop the selected file/folder to the added Story HD drive.
2. Files (or folders) will be transferred to folders below according to
their content type.
- E-Book : book - Image : image
Please connect the USB cable properly.
Powering down the computer and/or the product or disconnecting the USB cable
while copying and/or moving folders could cause serious damage to the memory.
The data transfer rate may differ depending on the computer or OS environment available in your region.
Getting Started
09
Deleting Files (Folders) from the Product
1. Select the files/folders to be deleted, right-click on them and select
[Delete].
2. Click [Yes] when the [Confirm File/Folder Deletion] window appears
and the selected files/folders will be deleted.
Inserting/removing the SD card
1. Power down the device
2. Open the cover of SD Card slot.
3. Place the SD card in the slot
(see the figure on the right)
and press gently.
3. To remove, gently press down
again and the SD card will eject
itself.
Getting Started
10
Recommended SD cards
Brand: SanDisk, Transcend
Insert/remove the SD card while the power is off.
Do not force the SD card. This may cause malfunction and damage to the SD
Do not remove the SD card when in use. It may cause the device to
card.
malfunction and damage to the SD card. Please do not repeatedly
insert/remove the SD card. If the SD card is not positioned properly, the
product may malfunction or the card may become un-removable.
Please use only the recommended SD cards. The use of other Micro SD
cards may cause the device malfunction.
The transfer rate of the SD card may differ according to the computer specs
and status.
card into an SD card reader or the device (with the SD card inserted) to the
computer. Then right click and choose the option to format the SD card.
When formatting a SD card, all data on the card will be deleted. Please
make sure that the data is backed up and saved somewhere else before
formatting. It is recommended that the SD card remove to be formatted to
the FAT 32 system. If the SD card is not recognized or has malfunctioned,
please reformat the card and retry.
SD cards can be purchased separately.
It is recommended that you use a SD card up to 32GB.
The SD card must be formatted before use. To do this, plug the SD
Using Adobe Digital Editions
You can transfer copyright protected ebooks to the Device using
Adobe Digital EditionsTM.
Getting Started
11
Installation
1. Download Adobe Digital Editions
TM
on your computer from the Adobe
website(www.adobe.com/products/digitaleditions/)
Once the download is completed, the installation guide screen will appear.
2. Please complete the installation process by following the
step-by-step instructions.
Authenticating the Computer and the Product
1. After installing the Adobe Digital Editions program, please begin
the [Library-Computer Authentication] process.
2. After entering your ID and password on the computer's
authentication window, press the authentication button.
If you have not previously registered with an Adobe ID, you can go
to the Adobe website to set-up an account.
3. After the authentication process is completed, the device installation
helper window will appear by connecting the device to the computer.
4. Press the device authentication button.
Transferring Files to the Device
1. Open the Adobe Digital Editions program.
2.
Please select the content to be saved on to the device and drag & drop
onto the device icon.
Getting Started
12
Loading...