iriver plus 3 is an integrated software application that efciently manages music, video, and picture les.
iriver plus 3 gives you freedom to transfer music, video and picture les from PC to the device.
Insert the installation CD into your PC to display the installation process screen.1.
Select iriver plus 3 and click the 2.
Complete the installation process by following the on-screen instructions.
Notice...
Minimum requirements for using iriver plus 3
Windows® 2000/XP
Intel® Pentium® ll 233 MHz or higher processor speed 64 MB or greater memory 30 MB or greater hard disk space
16-bit enabled speaker and sound card Microsoft Internet Explorer version 6.0 or later
SVGA or high resolution monitor (1024x768 resolution or greater)
Windows® Vista (Windows® Vista only supports the 32-bit version and does not support the 64-bit version.)
Intel® Pentium® ll 800MHz or higher processor speed 512 MB or greater memory 20 GB or greater hard disk space
16-bit enabled speaker and sound card Microsoft Internet Explorer version 6.0 or later
SVGA or high resolution monitor (1024x768 resolution or greater)
For more information on using iriver plus 3, refer to pages 36 - 39.
Insert the installation CD to your PC to display the installation process screen.1.
Select Windows Media Player 11 and click the 2.
Complete the installation process following the on-screen instructions.
Notice...
Minimum requirements for using Windows Media Player 11
Windows® Vista
Intel® Pentium® ll 800MHz or higher processor speed 512 MB or greater memory 20 GB or greater hard disk space
16-bit enabled speaker and sound card Microsoft Internet Explorer version 6.0 or later
SVGA or high resolution monitor (1024x768 resolution or greater)
For more information on Windows Media Player 11 , refer to pages 40 - 42.
Install
button.
9
02 Basic Operations
Turning the Product on/off 12
Menu selection 13
Using HOLD and RESET 14
Connecting Products
This product has an automatic power saving function to save battery power.
Based on the settings in power save mode, the product will be automatically turned off after a pre-determined period without operation.
For more information on setting this mode, refer to Settings > Power Saving > Auto Power off. (Refer to page 33.)
In the main menu, press the [UP] / [DOWN] button to select the menu.1.
Press and hold the [LEFT] button to display the main menu from any operation screen.2.
While the product is connected to a PC using the USB cable, the
integrated battery will be charged automatically.
Do not use any USB cable other than the one included with the
product. It may cause a malfunction.
Check if the Lplayer is connected to a high-power USB 2.0 port.
Some low-power USB ports built into certain peripheral devices,
such as some types of keyboards and USB hubs without integrated
power may not provide enough power to charge.
Charging the product
Turn on your PC and connect the Lplayer to it using the 1.
USB cable provided.
While the PC is switched to standby mode, the product may not
be charged.
Charge the product only at room temperature.
The product may not be charged in extreme hot or cold temperatures.
The charging time might be extended if you use the product while
charging.
Press and hold the 1. button on the product to turn
it on.
Turn on your PC and connect the Lplayer to it using the 2.
USB cable provided.
If properly connected, the LCD will display as below.3.
Power & Data : The product is currently being
charged and data is being transferred.
Power & Play : The product is currently being charged and
a le is being played.
Power Only :The product is currently being charged.
Select the desired les / folders in your PC and 1.
drag & drop to the drive which appears as the product.
Notice...
Always connect the USB cable properly.
While transferring data using the USB cable, never disconnect it or turn off the power to protect your data from loss or damage.
Deleting les / folders from the product
After selecting the desired le / folder, right-click with 1.
your mouse and select Delete.
Click 2.Ye s in the Conrm File Delete / Conrm Folder
Press the [RIGHT] button while playing to select the
beginning (A) point. Press it again to select the end (B)
point. The designated section between A and B will be
played. Press the [RIGHT] button again to deactivate the
repeat playback.
Play Mode
Selects the play mode which decides the playing order.
- Normal: Deactivates the play mode.
- Repeat: Repeats all les.
- Repeat One: Repeats one le.
- Shue: Randomly plays les in the current Database.
-
Shue + Repeat: Randomly repeats les in the current Database.
Notice...
To avoid sound distortion, do not set the levels of Custom EQ and SRS WOW HD to high.
Press and hold the [RIGHT] button to display the Options screen.
Select EQ
Selects the EQ to be used for playing music.
Setup Sound
Sets the sound eect.
- Custom EQ: Changes levels of each frequency range to
create your own equalization.
- SRS WOW HD: Sets the levels of 3D sound eect.
- SRS: Customizes the SRS 3D sound eects.
- TruBass: Customizes the bass sound level
- Focus: Sets sound clarity.
-
WOW: Sets the proper boost level according to earphone type.
- Denition: Produces sharper and clearer sound.
- Fade-In: Volume increases gradually when playback starts.
In the main menu, press the [UP] / [DOWN] button to 1.
select Videos and press the [RIGHT] button.
Press the [UP] / [DOWN] button to select the item and 2.
press the [RIGHT] button.
Press the [UP] / [DOWN] button to select the le and 3.
press the [RIGHT] button to play it.
Notice...
Supported file formats: AVI, WMV
In the Videos mode, only video files in the Video folder will be displayed.
To play other video files in any other folder, use the File Browser mode.
Max. playing time is variable depending on video type.
Be sure to use iriver plus 3 when transferring video files.
Otherwise, unexpected errors occur during video playback.
Playing Video
Press the +/- button to control the volume.●
Press the [RIGHT] button to pause or resume.●
Press and hold the [UP] / [DOWN] button to play fast ●
forward or reverse.
While playing, press the [LEFT] button to return to the ●
previous menu.
If there is a caption file (.smi), you can encode it together with video
file using iriver plus 3. (Be sure to match both names of video and
caption files.)
In the main menu, press the [UP] / [DOWN] button to 1.
select Pictures and press the [RIGHT] button.
Press the [UP] / [DOWN] button to select the item and 2.
press the [RIGHT] button.
Play All Displays all pictures in the product.Dir List Displaying saved picture les.Picture Playlists Displays picture playlists made in iriver plus 3.
Press the [UP] / [DOWN] button to select the le and 3.
press the [RIGHT] button to display the picture on the
screen.
Notice...
Supported file formats: JPG, BMP, PNG, GIF
(Some file types may not be fully compatible.)
In the Pictures mode, only picture files in the Picture folder will be displayed.
To play other picture files in any other folder, use the File Browser mode.
Viewing Picture
While playing pictures, press the [RIGHT] button to ●
start / pause a slide show.
While playing, press the [UP] / [DOWN] button to ●
play the previous / next picture.
While playing, press the [LEFT] button to return to the ●
previous menu.
Be sure to use iriver plus 3 when you transfer image file.
Otherwise, unexpected errors might occur during image playback.
In the main menu, press the [UP] / [DOWN] button to 1.
select Recordings and press the [RIGHT] button.
In recording standby screen, press the [RIGHT] button 2.
to start recording. Press again to pause recording.
Press the [RIGHT] button to stop recording. 3.
Notice...
You cannot control the volume while recording.
If the remaining memory space or power is insufficient, recording will
be automatically stopped.
The file size per minute varies with recording quality.
Low: Approximately 480 K / Middle: Approximately 720 K / High: Approximately 960 K
Additional Features
In recording standby mode, press and hold the [RIGHT] button
to display the Options screen.
Recording Quality
Sets the quality of recordings.
The recorded file will be saved in the following for mat:
(YY: Year, MM: M onth, DD: Day, XXX: Sequential number)
[Recordings > Voice] VOICEYYMMDDXXX.WMA
Connect the product to the USB jack of your PC using 1.
the USB cable and run iriver plus 3.
Select 2.Tools > Por table Device > Initialize Disk and click
Start when the initialization conrmation message
appears.
The initialization process is completed and the product 3.
is disconnected from your PC.
Notice...
You need to backup the necessary files before initialization,
since formatted files cannot be recovered.
Upgrading Firmware
After connecting the product to the USB jack of your 1.
PC using the USB cable, run iriver plus 3.
The PC should be connected to the internet.
Select 2.Tools > Por table Device > Firmware Upgrade
and complete the upgrade process by following the
on-screen instructions.
Notice...
Do not disconnect the product from PC while downloading the
firmware upgrade file. Once the download is completed,
disconnect the cable to activate the firmware upgrade.
If the latest version of the firmware is already installed, the
message to confirm the latest version appears.
Messages regarding any available firmware updates will appear
automatically when you connect the product to your PC.
iriver Limited holds all rights for the patent, trademark, literary property
and intellectual property related to this manual.
You may not copy or reproduce any part of this manual unless authorized by iriver Limited. You may be subject to criminal penalties for illegal use of any part of this manual. Software, audio and video including
intellectual property are protected by copyright and international laws.
Reproduction or distribution of contents created with this product is
the responsibility of the user.
The companies, institutions, products, people and events used in
examples are for demonstration purposes only. Their appearance in this
manual does not imply any aliation between iriver and other parties.
Users are responsible for observing all copyrights and intellectual
property laws.
MIC, FCC, CE
Class B Digital Device (Residential Communication Device). This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation.
Trademarks
Windows 2000, Windows XP, Windows Vista and Windows Media Player are
the registered trademarks of Microsoft Corp.
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
Limited Liability
Neither the manufacturer, importers nor dealers are responsible for any
accidental damage, including bodily injury or any damages resulting
from misuse or inappropriate operation on behalf of the user. The information on this manual is prepared with the current player specications.
The manufacturer, iriver Limited, shall routinely add new features to the
product and may continuously apply new technologies hereafter. All
standards may be changed at any time without prior notice.
- Check whether the battery is charged or not.
Charge the product using the USB cable and then
check again.
- Insert a thin and pointed object (such as a straightened
paper clip) into the reset pinhole to reset the device.
The product cannot be charged after connecting power.
- Check whether the USB cable is rmly connected.
The LCD display turns o frequently.
- To save power consumption, the LCD is designed to be
turned o after a designated period of time.
Set this amount of time in Settings > Display > Backlight.
The product cannot be connected properly using the
USB cable.
- Check whether the USB cable is rmly connected.
Poor radio reception with heavy interference!
- Check whether the earphones jack is dirty.
- Check whether the earphones are connected.
- Adjust the position of the player and earphones.
- Turn o any nearby electronic equipment to avoid
potential interference.
No sound during playback!
- Check whether the volume is set to “0”.
-
Check whether the earphone plug or connection jack is dirty.