Rock Speaker Bluetooth
Quickstart Guide
English ( 3 – 4 )
Guía de inicio rápido
Español ( 5 – 6 )
Guide d’utilisation simplifié
Français ( 7 – 8 )
Guida rapida
Italiano ( 9 – 10 )
Kurzanleitung
Deutsch ( 11 – 12 )
Snelstartgids
Nederlands ( 13 – 14 )
Appendix
English ( 15 )
Quickstart Guide (English)
1. Make sure all items listed in the BOX CONTENTS are included in the
box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE
PRODUCT.
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE
BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE.
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
Introduction
Thank you for purchasing the ION Audio Rock Speaker
Bluetooth! Rock Speaker Bluetooth simulates a natural rock
finish that blends into your landscaping, with a rechargeable
battery-powered, water-resistant speaker. Equipped with
Bluetooth technology, you can listen to your favorite music
wirelessly while working in the garden, hosting a dinner
party, or relaxing by the pool.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this
battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years.
Here are some recommendations for getting the longest life from the internal battery.
GENERAL USAGE
• FULLY CHARGE THE BATTERY BEFORE USING IT.
• CHARGE THE BATTERY COMPLETELY AFTER EACH USE.
STORAGE
• For best product longevity, do not store at exceedingly hot (greater than 90F (32C)) or exceedingly cold
(less than 32F (0C)) temperatures.
• It is acceptable to leave your sound system plugged in. This will not overcharge the battery.
• If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity..
DISPOSAL
• Bring the unit to a recycling center or dispose of in accordance with local ordinances.
Note: If the battery fails to charge, contact ION Audio at ionaudio.com/support.
Outdoor Use and Care
Though Rock Speaker Bluetooth is water-resistant and able to tolerate splashing water, please review the tips below
to get the best performance from Rock Speaker Bluetooth:
• Bring Rock Speaker Bluetooth indoors during extreme cold, heavy rain, or melting snow.
• Please do not place Rock Speaker Bluetooth in standing water.
• Please do not connect the charging adapter to Rock Speaker Bluetooth in a wet environment.
WARNING: Keep any non-water-resistant
devices (phones, music players, etc.) in a dry
place where they will not be affected by water
and cause a risk of electric shock.
3
BOX CONTENTS
Rock Speaker Bluetooth
Charging Adapter
Quickstart Guide
Safety & Warranty Information
Booklet
Parts Description
1. Power – Hold this button to power Rock Speaker Bluetooth on and
off.
2. Bluetooth Connect – Press this button to begin Bluetooth
connecting.
Note: Rock Speaker Bluetooth will automatically power off after 30
minutes if no device is connected. After 2 hours of no music
playing, Rock Speaker Bluetooth will automatically power off, even
if still connected.
3. Link – Press this button to link two Rock Speaker Bluetooth
units together.
4. Charging Adapter Input – Insert the included charging
adapter here to charge the Rock Speaker Bluetooth battery.
5. Reset – If Rock Speaker Bluetooth is working abnormally,
shutdown the unit by placing a paperclip into the Reset hole
located on the bottom of Rock Speaker Bluetooth, and gently
push until the unit turns off. Try this only after you have first
attempted to reboot Rock Speaker Bluetooth using the power
button.
6. Charging LED – This LED is solid red when the battery is
charging and turns off when the battery is fully charged/no
adapter is connected.
7. Bluetooth LED – This LED slowly blinks blue when the
speaker is powered on, blinks fast while Bluetooth searching,
and is solid when Bluetooth connected.
8. Link LED – This LED blinks fast when searching for another
Rock Speaker Bluetooth and is solid when linked to another
Rock Speaker Bluetooth.
Bluetooth Connecting with Rock Speaker Bluetooth
Connecting to one Rock Speaker Bluetooth:
1. Power on Rock Speaker Bluetooth by holding down the power button. A tone will be heard when powering on.
2. Press the Bluetooth Connect button to enter Connecting Mode.
Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. Rock Speaker
Bluetooth LED will light up solid when it is connected and play a tone.
Note: If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device and try to
connect again.
Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.
3. To disconnect, hold the Bluetooth Connect button on Rock Speaker Bluetooth. A tone will be heard when
disconnecting.
4. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button
on the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Linking two Rock Speaker Bluetooth units:
Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them is connected,
hold the Bluetooth Connect button to disconnect and then follow the steps below.
1. Power on each Rock Speaker Bluetooth by holding down their power buttons. A tone will be heard from each
speaker when powering on.
2. Press the Link button on each Rock Speaker Bluetooth. The speakers will search for each other while playing
an intermittent tone. Once found, they will play a tone to confirm they are linked. This may take up to 2 minutes
the first time two speakers are linked.
3. Press the Bluetooth Connect button on the Rock Speaker Bluetooth that you want to be the "master" (left
channel). This is the unit that your device will connect to, and the unit from which the Bluetooth range will be
determined.
4. Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. A tone will be
heard when connected.
Note: If you experience trouble in connecting, select “Forget this Device” for Rock Speaker Bluetooth on your
Bluetooth device and try to connect again.
Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.
5. To disconnect linking, hold the Link button on the “master” Rock Speaker Bluetooth for 5 seconds. A tone will
be heard when disconnecting.
6. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button
on the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Note: When two speakers are linked, hold the power button on one speaker to turn both speakers off. The
speakers will relink automatically the next time they are both powered on.
4
Rock Speaker Bluetooth LED
activity:
Solid Red Charging LED = Battery is
charging, LED turns off when charging
is full or when no adapter is
connected.
Solid Blue Bluetooth LED =
Connected to a Bluetooth device.
Blinking Blue Bluetooth LED =
Blinks slow when powered on. Fast
blinking when searching for Bluetooth
devices to connect to.
Solid Link LED = Linked to another
Rock Speaker Bluetooth.
Blinking Link LED = Blinks fast when
searching for another Rock Speaker
Bluetooth to link to.
LINK
Guía de inicio rápido (Español)
1. Asegúrese de que estén presentes todos los elementos enumerados
en CONTENIDO DE LA CAJA estén incluidos en la caja.
2. LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES
DE UTILIZAR EL PRODUCTO.
3. PARA ASEGURAR UNA MÁXIMA VIDA ÚTIL DE LA BATERÍA,
CÁRGUELA COMPLETAMENTE ANTES DE USARLA POR
PRIMERA VEZ.
Para soporte adicional del producto, visite ionaudio.com/support
Para información acerca de la seguridad y la garantía, visite ionaudio.com/warranty
Introducción
¡Gracias por adquirir el Rock Speaker Bluetooth de ION
Audio! El Rock Speaker Bluetooth simula el acabado natural
de una roca que se mezcla con su paisaje, con un altavoz
resistente al agua, alimentado por baterías. Equipado con
tecnología Bluetooth, usted puede escuchar su música
favorita en forma inalámbrica mientras trabaja en el jardín,
es el anfitrión de una cena o se relaja al costado de la
piscina.
Baterías recargables
Las baterías de plomo-ácido recargables son del mismo tipo que se usa en los automóviles. Como ocurre con las
baterías de automóviles, la forma en que la use tiene una influencia significativa sobre la duración de su vida útil.
Con un uso y tratamiento apropiados, una batería de plomo-ácido puede durar varios años. He aquí algunas
recomendaciones para prolongar la vida útil de la batería interna.
USO GENERAL
• CARGUE COMPLETAMENTE LA BATERÍA ANTES DE USARLA.
• CARGUE LA BATERÍA COMPLETAMENTE DESPUÉS DE CADA USO.
ALMACENAMIENTO
• Para lograr una vida útil óptima del producto, no lo guarde a temperaturas muy altas (superiores 90F
(32C)) o muy bajas (inferiores a 32F (0C)).
• Es aceptable dejar su sistema de sonido enchufado. No sobrecargará la batería.
• Si deja que el nivel de la batería baje y no la carga durante 6 meses, puede perder permanentemente su
DISPOSICIÓN FINAL
Nota: Si la batería no se carga, póngase en contacto con ION Audio en ionaudio.com/support.
Uso y cuidado a la intemperie
Aunque el Rock Speaker Bluetooth es resistente al agua y capaz de tolerar salpicaduras, lea las sugerencias que se
incluyen a continuación para obtener el mejor rendimiento del Rock Speaker Bluetooth:
capacidad.
• Lleve la unidad a un centro de reciclaje o deséchela de acuerdo a las ordenanzas locales.
• No deje el Rock Speaker Bluetooth a la intemperie en condiciones de frío extremo, lluvias fuertes o nieve
derretida.
• No coloque el Rock Speaker Bluetooth sobre agua estancada.
• No conecte el adaptador de carga al Rock Speaker Bluetooth en un ambiente húmedo.
ADVERTENCIA: Coloque los dispositivos no
resistentes al agua (teléfonos, reproductores
de música, etc.) en un lugar seco donde no
sean afectados por el agua y causen un
riesgo de electrocución.
CONTENIDO DE LA CAJA
Rock Speaker Bluetooth
Adaptador de carga
Guía de inicio rápido
Folleto de información sobre la
seguridad y la garantía
5