Iomega EP510 User Manual

omega.com

e-mail: [e-mail]

For latest product manuals:

omegamanual.info

EP510, IP510,

EP511, IP511 SERIES

Electroneumatic Converters

Shop online at

User’s Guide

MADE IN

OMEGAnet®Online Service Internet e-mail

omega.com [e-mail]

Servicing North America:

U.S.A.: Omega Engineering, Inc., One Omega Drive, P.O. Box 4047

ISO 9001 Certified Stamford, CT 06907-0047 USA

Toll Free: 1-800-826-6342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

Canada: 976 Bergar

Laval (Quebec), H7L 5A1 Canada
Toll-Free: 1-800-826-6342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA

Customer Service: 1-800-622-2378/1-800-622-BEST
Engineering Service: 1-800-872-9436/1-800-USA-WHEN

®

®

®

Mexico/
Latin America

En Español: 001 [phone] FAX: [phone]
[e-mail] e-mail: [e-mail]

Servicing Europe:

Benelux: Managed by the United Kingdom Office

Toll-Free: 0800 099 3344 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

Czech Republic: Frystatska 184

733 01 Karviná, Czech Republic
Toll-Free: 0800-1-66342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

France: Managed by the United Kingdom Office

Toll-Free: 0800 466 342 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

Germany/Austria: Daimlerstrasse 26

D-75392 Deckenpfronn, Germany
Toll-Free: 0800 6397678 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

United Kingdom: OMEGA Engineering Ltd.

ISO 9001 Certified One Omega Drive, River Bend Technology Centre, Northbank

Irlam, Manchester M44 5BD United Kingdom
Toll-Free: 0800-488-488 TEL: [phone]
FAX: [phone] e-mail: [e-mail]

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any
errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.

A

IR CONNECTIONS

A

UPPLY

S

-4109/1104 IP510, EP510, IP511, EP511 SERIES

M

Connect air supply to 1/4 NPT port marked "IN." If the above specifications are not met, possibility of internal clogging
exists. Also see MAINTENANCE section.

OUTPUT

Connect output to 1/4 NPT port marked "OUT."

AUGE

G

The plugged 1/8 NPT port in the base of the transducer is internally connected with the "OUT" port. A pressure gauge can be
attached to this port to monitor output pressure.

CONTENTS

Air Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

Pressure Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2

Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2

Direct Mounting
Mounting Kits

Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Precautions to be observed during installation

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

Agency Approvals, Special Notes, and Cautions . . . . . . . . . . . . . . . . . .Page 5 & 6

Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

WARNING

In order to get optimal service from this transducer and ensure warranty coverage the following MUST be followed:

• The supply air quality to this instrument must be instrument quality air as defined by ISA Standard 57.0.01-1996.

1. Dew point not higher than 35˚F.

2. No particulates larger than 3 microns in size.

3. Maximum oil content of 1 ppm.

No mechanical adjustments or calibrations are necessary or allowed. All calibration MUST be done with electrical poten-

•
tiometers on the enclosed circuit board only. See “CALIBRATION” section of instructions for more information.

TABLE 1: SUPPLY PRESSURE REQUIREMENTS

Standard Output

Calibration

Transducer

Supply Pressure

0-2
PSI

20-45

PSI

0-5
PSI

20-45

PSI

0-30

PSI

50-90

PSI

0-60

PSI

80-120

PSI

0-100

PSI

110-130

PSI

0-120

PSI

130-140

PSI

1-17

PSI

30-70

PSI

3-9
PSI

20-100

PSI

3-15

PSI

20-100

PSI

3-27

PSI

35-100

PSI

6-30

PSI

35-100

PSI

3

A

M-4109/1104 IP510, EP510, IP511, EP511 SERIES

M

OUNTING

GENERAL

NEMA 1 and NEMA 4X transducers can be mounted in any position.

DIRECT MOUNTING

PIPE

• Any NEMA 1 transducers may be supported by its own plumbing for air supply and output. NEMA 4X transducers may
also be supported using 1/2" explosion proof conduit in the electrical port.

PANEL

• NEMA 1 transducers may be mounted to a panel with two No. 10-32 screws using threaded holes in the back of a trans-
ducer or with two to four No. 8-32 screws using threaded holes in the bottom of a transducer.

• NEMA 4X transducers may be mounted to a panel with three No. 10-32 screws using threaded holes in the back of a
transducer or with four No. 8-32 screws using threaded holes in the bottom of a transducer. In the case of back-mount­ing, if the panel extends towards the screw-on cover, a 3/16-inch-thick spacer MUST be used between the back of the
transducer and the panel in order for the panel to clear the transducer's screw-on cover.

EP510 AND IP510

WEIV EDISWEIVTNORF

WEIVPOTWEIV MOTTOB

Drawings and dimensions are for reference only.

4