Invotone DM500 User Manual [ru]

Specially designed for KTV Box and karaoke
occasion etc., much more attention is paid to the
construction and material of our DM-500 dynamic
microphone. The firmly brazing grille and Zinc
die-casting housing are adopted. Moreover, the ring
by which the top part and the bottom part of the
grille are linked enjoys the capability of preventing
the whole body from unexpected rolling down due
to its shape of multi-rhombus. With excellent
painting on the body and exquisite feel, it is hard to
be worn away. However, the best characteristic is
its sound quality, which provides clear and distinct
bass and alt without exploding noise and also can
bear high SPL. The balanced cable minimizes the
cable noise owing to the excellent shield effect and
balanced output function.

Specifications:

Element: Moving Coil Dynamic
Polar Pattern: Uni-Directional
Frequency Response: 60Hz-18KHz
Sensitivity: -50dB±3dB (0dB=1V/Pa at 1KHz)
Output impedance: 600Ω±30% (at 1KHz)

Frequency response graph:

-40

-50

-60

PROFESSIONAL DYNAMIC MICROPHONE

Connecting and disconnecting the
microphone cable:

1. Insert the XLR connector into the microphone. If
necessary, rotate the connector to align the key
on the connector and the groove in the
microphone. Push the connector into the
microphone until it clicks.

2. To disconnect the cable and microphone, grasp
the connector while depressing the tab. pull the
connector away from the microphone.

Cautions:

1. If the head of the microphone is covered by
hand or brought close to the speaker, a howling
sound may be generated. To prevent this, first
decrease the volume, then place the
microphone so that it is not pointed to the
speaker and that there is a sufficient distance
between the microphone and speaker.

2. It is important to keep foreign particles out of
the grill and the windscreen because they may
alter the frequency response of the microphone.
The grill shall be periodically cleaned using
warm, soapy water, rinsed with plain water and
let dry before replacing.

3. Due to the high sensitivity of the cartridge, do
not drop it from high or apply strong shock to it.

4. To maintain the sensitivity and quality of sound
reproducing, avoid exposing it to moisture and

(dB)

-70
20 50 200 500 2K 5K 20K

(Hz)

Frequency Response Graph

0

360

300

270

240

210

Uni-directional
(at 1kHz)

30

150

180

60

90

120

extreme temperatures.