Invotone CM610PRO User Manual [ru]

CONDENSER INSTRUMENT

-20

Frequency Response Graph

Uni-directional

6090120

150

180

MICROPHONE

INVOTONE CM-610 PRO is the latest

condenser microphone for musical instruments.

Connecting And Disconnecting The Microphone
Cable:

It adopts a back electret condenser capsule
which ensures warm and rich sound at
intermediate frequencies and no plosions at
high ones enabling the real nature of the sound
to be reproduced clearly. It can be used for
orchestral instruments, pianos, etc.

CM-610 PRO professional condenser

microphone is powered by 9V-52V DC phantom.
Its standard XLR connector matches all kinds of audio
equipment. It's an ideal choice for acoustic projects. The
exceptional design and durable construction make it
extremely attractive for the end-users.

Specifications:

Element: Back Electret Condenser
Polar Pattern: Uni-directional
Frequency Response: 30Hz-18kHz

1. Insert the XLR connector into the microphone. If
necessary, rotate the connector to align the key on the
connector and the groove in the microphone. Push the
connector into the microphone until it clicks.

2. To disconnect the cable and microphone, grasp the
connector while depressing the tab. Pull the connector
away from the microphone.

Operation:

PHANTOM POWER

VOICE AMPLIFIER,
MIXER,
POWER AMPLIFIER

SUPPLIER

XLRFXLRMXLRF

Usage:

1. Turn on your amplifier or mixing board and set the
volume control to minimum position, To connect the
phantom power to the microphone turning on the
phantom switch, accommodate the volume control

Sensitivity: -38dB±3dB(0dB=1V/Pa at 1kHz)
Output Impedance: 100Ω±30%(at 1kHz)
Max. Input SPL: 135dB(at 1kHz ≤1% T.H.D)
Self Noise: 24dB A
S/N Ratio: 70dB
Phantom Power Requirement: 9V-52V DC phantom

Frequency Response Graph:

-30

-40

-50

(dBV/Pa)

-60

20 2K 20K50 100 200 500 1K 5K

(Hz)

330

300

270

240

210

30

from low to high so obtained effect to your moderate
level for protected the sauna from pounding.

2. If the head of the microphone is covered by hand or
brought close to the speaker, a howling sound may be
generated. To prevent this, first decrease the volume,
then place the microphone so that it is not pointed to
the speaker and that there is a sufficient distance
between the microphone and speaker.

3. The sensitivity of cartridge is very fine, Don’t do drop.
Hit it or apply strong shock to it.

4. To maintain the sensitivity and quality of sound
reproducing, avoid exposing it to moisture and
extreme temperatures.

(at 1kHz)