INVACARE
®
®
MVP
Folding Wheelchair
V
ersatile, growable and designed with performance in mind, the Invacare® MVP® and MVP® jr. Wheelchairs are the premier folding chairs
in the Invacare Custom Manual wheelchair line. With a refined sense of style and three rear frame options, these chairs are easy to match
the consumers needs – responsiveness (Curved frame), stability (Square frame) or growth and positioning (Extended frame). The threepiece modular frame design easily accommodates growth by replacing the front frame section. Backed by the quality and reliability that is
built into every Invacare product, the MVP and MVP jr. Wheelchchairs give consumers the durability and performance they need and set
the standard for every folding chair in the industry. Think MVP Wheelchairs when consumers want maximum versatility and performance
with the convenience of a folder.
The MVP with curved rear frame,
tapered swingaway front riggings, 24”
high performance spoke wheels, 5”
aluminum casters, and Teal frame.
Features
• Lightweight aluminum folding frame
• Adjustable angle back option on the Square frame
• Adjustable angle footplate and clamp
• New front head tubes style
• Hideaway Undermount Wheel Locks available
• Improved wheels include black rim and black hub
• Three rear-frame options – Curved (responsive),
Square (stability) and Extended (growth and positioning)
• Standard axle plate on the Square and Extended frames
allows center-of-gravity adjustment under the back canes for
maximum stability
• Virtually unlimited seat-to-floor height/wheel combinations
• Three piece modular frame easily accommodates growth by
replacing the front frame
• Heavy-duty package increases weight limit from
250 lb. to 350 lb. (MVP Wheelchair only)
• Less-Seat-Rail option provides lower seat-to-floor heights
• Camber choices from 0˚ to 9˚
• Choice of fixed or swing-away front end
• Thumb Saver Wheel Locks are standard
• Tapered front riggings available
Features
Adjustable angle back option on the Square
frame provides four angle positions for postural
requirements: 90˚, 95˚, 100˚, 105˚.
Front head tubes offer a cleaner look and easy
adjustment to the front caster to compensate for
rear seat-to-floor height changes.
Hideaway Undermount Wheel L ocks provide
great action and remain out of the way while
propelling and transferring. Available with fixed
front frame only.
Rear-Frame Options
The MVP and MVP jr. wheelchairs are available with three rear frame options – Curved, Square and Extended frames.
The Curved rear frame option offers great
maneuver ability and quick-response performance,
while providing a sporty appearance and the
shortest overall length.
The Square rear frame option performs with
outstanding stability. The axle plate allows
the rear wheels to be placed directly below the
back canes.
The Extended rear frame option allows
adjustment for the positioning needs of both
adoles cents and individuals with special seating
requirements.
Available in frame sizes as small as 12” x 12”,
the MVP jr. wheelchair is a great solution for
your pediatric needs.
Adjustable Angle Footplate and Clamp
Adjustable angle footplates offer softer edges.
The footplate clamp is double-sided for
increased durability and superior performance.
Invacare® MVP® and MVP® jr.
Extended Frame with Less-Seat-Rail (LSR)
To accommodate the consumer’s growth, the
frame is depth adjustable and features an
adjustable angle back.
The Less-Seat-Rail option allows easy
placement of seating systems.
4
Specifications
Invacare® Invacare
MVP® Wheelchair MVP® jr. Wheelchair
Seat Width 15" - 22" 12" - 16"
Seat Depth 9" - 22" 9" - 19"
Minimum overall width* Seat width plus 10" Seat width plus 10"
Adjustable angle back** 90˚, 95˚, 100˚, 105˚ 90˚, 95˚, 100˚, 105˚
Adjustable height back 10" - 18" 10" - 18"
Camber angles 0˚, 3˚, 6˚, 9˚ 0˚, 3˚, 6˚, 9˚
Tubing outside diameter O. D. 1" aluminum 1" aluminum
Weight of chair 17 lb. (16"x16" without wheels and accessories)
Weight capacity 250 lb. 150 lb.
Heavy-duty package 350 lb. n/a
Warranty on frame and crossbraces Limited Lifetime Limited Lifetime
*Measurement taken from outside of handrims with 3˚ camber.
**Not available with Heavy-duty package.
Rear Seat-to-Floor
(range adjusts in 7/8" increments) Curved Square/Extended
16" wheel 14.75" - 16.5" 14.75" - 17.75"
18" wheel 14.75" - 17.5" 14.75" - 18.75"
20" wheel 14.75" - 19" 14.75" - 20"
22" wheel 15.25" - 20" 15.75" - 21"
24" wheel 15.75" - 20.5" 16.5" - 21.25"
26" wheel* 16.75" - 21.25" 17.5" - 21.25"
*Not available on MVP jr. Wheelchair
Front Seat-to-Floor Swingaway Fixed
Min. Max. Min. Max.
3" caster 15.25" 18.75" 14.75" 18"
5" caster 16" 19.75" 15.5" 19"
6" caster 17" 20.25" 16.5" 19.25"
6" caster 18" 20.25" 17.5" 19.75"
8" caster 18.75" 21.25" 18.25" 20.5"
Knee-to-heel*
Front Rigging Type Min. Max.**
70˚ tapered 15.75" - 19.75"
70˚ 13.50" - 18.50"
70˚ MFX 8.75" - 14.75"
Elevating 15.25" - 21.25"
90˚ 5.25" - 10.25"
60˚ 14.75" - 18.50"
60˚ MFX 11" - 15"
*Ranges adjust in 1" increments.
**Measurement taken from top of seat rail to back of footrest.
Arm Heights*
Swingaway padded 8" - 10" (in 1" increments)
Cantilever (bolt-on) 5" - 10" (in 1" increments)
Adjustable height Dual point 10" - 14" (in 1" increments) (conventional or spacesaver)
T-arm low range 6" - 10" (in ½" increments) (full and desk range)
T-arm high range 8" - 14" (in 1" increments) (full and desk range)
*Measurement taken from top of seat rail to top of armrest.
®
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
© 2011
Invacare Corporation.
All rights reserved. All
trademarks are identified
by the symbols ™ and ®.
All trademarks are owned
by or licensed to
Invacare Corporation
unless otherwise noted.
Specifications are
subject to change
without notification.
Form No. 01-350
Rev. 02/11
100808
Loading...