Interlogix TP-ADD-1DIP Specsheet

Product Data Sheet

TP-ADD-1DIP

TruPortal IP-Based 1-Door Add-on Module

Overview

TruPortal now offers an IP-based 1-door, 2-reader add-on
controller with PoE support that expands the capabilities of the
system while maintaining its simplicity. TruPortal's IP PoE 1­door add-on enables customers to leverage existing IT
infrastructure while eliminating the need for local power. In
addition, the unit helps lower labor costs for cable installation,
while reducing install time and increasing the ROI of existing IT
networks. And because it’s IP-based, this new controller isn’t
restricted by the length constraints of an RS-485 bus to provide
the ideal solution for effective, effi cient performance.

Standard Features

E For use with TruPortal Base System Controller
E Secures a single door with up to 2 readers
E Leverages existing IP network infrastructure
E PoE compatible
E Auto detection by TruPortal HW discovery
E Easy configuration via Web interface

TP-ADD-1DIP

TruPortal IP-Based 1-Door Add-on Module

Specifications

Primary Power (DCor AC)

IEEE802.3af 16 watt Class 0 Mode A and B

Main Power Input:

Secondary Power Input:

Communication Ports

Inputs

Digital Inputs

Reader Inputs Wiegand Data1/Data0

Outpus

Relay Outputs

Door Strike Power

Reader Port Compatibility

Input Supervision

Event History

Cardholders and Credentials

Regulatory Information

Agency approvals FCC Class A, CE

Environmental

Operating Temperature +2°C to +50°C

Relative humidity 5% to 95% non-condensing

Mechanical

Dimensions 258mm x 232mm x 77mm

Weight - Boards 0.47 Kg

Weight - Gross 2 Kg

Power over Ethernet Power Sourcing
Equipment (PoE/PSE) on Standard Category 5
Ethernet Cable

Auxiliary 24 VDC 1A power supply (24 watts) –
Not included

IP Communication with a TruPortal System
Controller

2 dedicated inputs per Door (RTE, Door Status,
Tamper, Aux)

1 Door strike relay (2A @ 28VDC or 30 VAC
maximum)

Optionally able to power the door strike (390 mA
maximum current) Jumper-selectable strike
voltage (12VDC / 24VDC)

4 Wiegand D0/D1 interfaces. Jumper selectable
Reader power (5 VDC, 12VDC)

Configurable resistance and supervision mode
on all inputs

Stored on the TruPortal System Controller.
65,000 historical events.

Stored on the TruPortal System Controller.
10,000 Credentials

Ordering Information

Part No. Description

TP-ADD-1DIP

TruPortal IP-Based 1-Door Add-on Module

As a company of innovation, UTC Fire & Security reserves the right to change product
specifications without notice. For the latest product specifications, visit UTC Fire & Security
online or contact your sales representative.
TP-ADD-1DIP-2014-12-5 07:44:16 Released :12-NOV-13