Product Data Sheet
OH-NETREC-1000
Network Receiver Licensed Software - 1000 accounts
The OH-NetRec
The Network Receiver software serves the
proprietary monitoring provider as well as the
traditional or contract central stations. The
receiver will monitor all alarm activity and control
communication using UTC Fire & security IP
transmitters in the CSX75 panel range (like the
CS7050 TCP/IP module), Advisor Advanced
range (ATSx000A-IP), Advisor Master panel
range ( ATS2xxx, ATS3xxx, ATS4xxx with
ATS1806 or ATS1809 module), NetworX panel
range (like the NX-590(N)E TCP/IP module) and
TDA74xx devices.
Alarm transmission
The communication between OH NetRec receiver
and alarm transmitters is secured using 3DES
encryption. The connection between transmitters
and the receivers is continuously monitored using
a polling mechanism (heartbeat). Depending on
the interface to the automation software (IP
versus RS232) and the polling interval the max
number of supported accounts is 1,000.
For EN50131 grade 3 environments the reeciver
also supports enhanced substitution detection.
OH-NetRec capabilities
The Network receiver software can effectively
monitor up to 1,000 controls with very little
bandwidth required.
Multiple receivers may be used to support the
dual, split, or backup TCP/IP reporting of the
different TCP/IP Reporting modules.
Whether a university, large retailer, or traditional
central station, the OH Network Receiver is a
powerful receiver handling the finest and most
versatile controls in the world.
Either Contact ID, SIA format or X-SIA reporting
(ATS only) is supported and all of the major
automation providers support the OH protocol and
the Sur-Gard protocol (selectable) to send alarm
information to automation. Additional signals are
generated for Line Faults (alarm transmitter not
responding) and substitution detected.The
receiver offers a complete and secure solution for
network and Internet monitoring.
Standard Features
Java based, supported on Windows 7, WIndows 8,
E
Windows Server 2008
Connects over networks using Ethernet with 10-
E
BaseT/100-BaseT
Heartbeats used to provide supervision of availability
E
as well as substitution detection
E
Monitors and supports 1,000 control panels
RS232 serial port or IP connection to automation
E
computer
E
Supports SIA and Contact ID formats (all transmitters)
Support X-SIA (ATS1806/1809 or Advisor
E
Advanced-IP and through TDA74xx module)
Supports both OH2000E protocol & Sur-Gard protocol
E
on the RS232 output
Supports the OH2000E protocol to MAS Automation
E
over TCP/IP
Required hardware depends on number of supported
E
accounts
OH-NETREC-1000
Network Receiver Licensed Software - 1000 accounts
Specifications
OH-NETREC-SOFTWARE
IPOH2000E
Automation protocol
RS232Sur-gard MLR, OH2000
PollingYes
Connection supervision
Substitution detectionYes
Using ATS8550Yes
Up/Download callback
ProcessorDual core, 2.4GHz
PC hardware (recommended minimum)
Memory2GB
Operating systemWindows 7
Advisor MasterATS1806
Supported devices
Advisor AdvancedATS1000A-IP
CSX75CS7050(N)
NetworXNX590(N)E
Ordering Information
Part No. Description
OH-NETREC-100
OH-NETREC-1000
Network Receiver Licensed Software for 100 accounts
Network Receiver Licensed Software for 1000 accounts
Additional features
The receiver supports callback for
up/download purposes when
combined with the Multi-User
Downloader (ATS8550). In
environments where the IP address
of the alarm transmitter changes
regularly, Up/Download can only be
Windows Server 2008
32 and 64 bit
ATS1809
ATS2000A-IP
ATS7310
CS9104/9204
CS7002(N)
NX-7002(N)(V3)
NX-9104/9204
achieved when the IP address is
known. As the alarm transmitter is
continuously connected to the
receiver for supervision purposes the
receiver is able to instruct the
transmitter to start an up/download
session.
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-IR-OH-NETREC-1000-2015-06-3 07:23:10