Interlogix NXG-1820-EUR User Manual
r
y
)
A
NXG-1820-EUR Touch Screen User Manual
here. Left and right arrows will switch to the previous/next
Introduction
The NXG-1820 is an intuitive graphical touch screen interface
for users of the xGen security system. It is offering simple
fingertip control, via its clear 3.5” touch screen with easy to
understand graphic icons.
Speake
Status Bar (1)
item. Sometimes a "Go to" button will appear to allow you
to navigate directly to the item you need.
The bottom tool bar typically includes a back button to
return to the previous screen, and a home button to save
the current settings and return to the home screen.
Entering a PIN Code
You will need a valid PIN code to access to various features
and system information.
After a period of inactivity, a screensaver will appear and it will
go into power save mode. Tap the screen to wake it up. A
screen will appear requesting to enter your code. A valid PIN is
required to unlock the screen and access the system.
System Awa
Arm (2
Status (5)
Main Menu (6)
Partition
List (7)
1. System Status bar – this colour coded section will provide
detailed information about your system.
2. Away – touch this button to arm the system in Away Mode.
3. Stay – touch this button to arm the system in Stay Mode.
4. Off – touch this button to disarm the system and to
acknowledge fault messages.
5. Status – touch this button for detailed status on partitions,
zones, and devices.
6. Menu – touch this button to access the menus.
7. Partition List – touch this button to view partition details.
8. SOS – touch this button to access emergency features
and the installer information.
System
Disarm (4)
System Stay
rm (3)
Emergency (8)
Navigating the NXG-1820E Touch Screen
Enter a valid user code followed by ENTER . User PIN
codes can be between 4 and 8 digits in length. The default
master user PIN code is 1234.
If you make a mistake, press the Delete key .
If the PIN code is invalid for the feature you are trying to
access you will be returned to the home screen.
Permissions are assigned to users and keypads to determine
what features a user can access and at what times. If you are
unable to access a feature, contact your installation company
or building manager.
System Status
The xGen will display colour coded system status messages
on the top of the main screen.
Status and information typically appears in the top section of
the screen.
User functions are in the middle of the screen. Navigation
buttons to scroll through lists up and down will appear
© 2015 UTC Fire & Security Americas Corporation, Inc. 1 / 7 P/N 230444 • REV D • ISS 08DEC15
• Red – critical messages including alarm
• Yellow – zones bypassed
• Blue – system (fault) conditions present
• Green – system is normal
Arm Your System In Away Mode
Enter a valid PIN code to unlock the screen.
Touch the Away or Away + button to arm your system in Away
mode:
If your system has multi-partition control enabled, the Stay +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access to.
Disarm One Or More Partitions
Enter a valid PIN code to unlock the screen.
Typically the buzzer will sound (continuous tone) announcing
the entry delay.
Touch the Off or Off + button to disarm your system:
If your system has multi-partition control enabled, the Off +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions that are in the state the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which areas and at what
time/day that user has access.
The icon will change to red when the alarm system is set in
away mode.
A buzzer will sound (beeping) announcing the exit delay.
Leave the premises during this time.
If your system has multi-partition control enabled, the Away +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access to.
Arm Your System In Stay Mode
Enter a valid PIN code to unlock the screen.
Touch the Stay or Stay + button to arm your system in Away
mode:
The icon will change to yellow when alarm system is set in stay
mode.
In Stay mode, typically one or more zones will be bypassed.
See colour code section on top of the display to read the zones
that are bypassed or go to Status menu.
Disarm After An Alarm
When an alarm condition occurs the screen may make a
constant beeping sound.
Enter a valid PIN code to unlock the screen.
The colour coded section provides further information about
the alarm condition, including the zone description (if
applicable).
For more details, touch the Status button. The partition and
zone(s) that caused the alarm will be displayed. Touch the
partition or zone number on the screen for a description.
2 / 7 P/N 230444 • REV D • ISS 08DEC15
Touch Details for more details on the type of alarm:
Touch the Off or Off + button to acknowledge the alarm
condition and disarm the partition(s):
• Device Filters – time-date, main AC, battery, box tamper,
siren, current, phone line, Ethernet line, Ethernet
communication, wireless link, wireless communication,
expander
Touch the up and down arrows to scroll to see more partitions,
zones, and devices if available.
The list and grid buttons to switch between a list view and a
grid view:
Display Partition List
If your system has multiple partitions, touch the Partition Status
Overview button (shown below) on the main screen to display
the partitions:
PartitionNumberList
(readonly)
Status
To view detailed status information about partitions, zones, and
devices enter a valid PIN code to unlock the screen and touch
the Status button:
Enter a valid PIN code with permissions to view the system
status. The following screen will appear:
Touch a partition number to display the partition status screen:
The top three buttons switch the status view between
partitions, zones, and xGen devices.
The left and right arrows allow you to filter the results to display
only selected events.
The and arrows allow you to scroll through all
available partitions and request their status.
• Partition Filters – not ready, away armed, stay armed, in
alarm
• Zone Filters – not ready, bypassed, in chime, in alarm, in
tamper, wireless or fire, all status except chime
P/N 230444 • REV D • ISS 08DEC15 3 / 7
Loading...