Network Transmission
NS3562-8P-2S
Low-profile Wall-mount
Industrial PoE+ Managed Switch
OVERVIEW
The IFS® NS3562-8P-2S Low-profile Wall-mount Industrial
Gigabit PoE+ Managed Switch by Interlogix is equipped with eight
10/100/1000Mbps RJ45 ports with PoE+ (30w) capabilities and two
100/1000Mbps SFP (fiber) uplink ports.
This fully managed Layer 2 switch provides an industrial hardened
design that provides for operational recovery in the event of a
network or power system failure.
Layer 2 Managed Switch
The IFS Industrial Gigabit Managed Switch Series supports
advanced features including IEEE 802.1Q VLAN, GVRP, port link
aggregation, QoS, broadcast storm control and MAC address
filtering. The series also includes IGMP snooping and querying
multicasting for media operations and bandwidth utilization to
fit a variety of applications. Via aggregation of supporting ports,
the series allows the operation of high-speed trunk operation
combining multiple ports. A maximum of four ports can be
assigned for four trunk groups and support fail-over as well.
Additionally, it is compliant with equipment from other vendors
that meet IEEE802.3 standard.
STANDARD FE ATUR ES
Ports
• 8-Ports 10/100/1000Base-TX (PoE+)
• 2-Ports 100/1000Base-FX (SFP)
• Auto MDI/MDI-X and Auto-negotiation
Power over Ethernet (PoE)
• Up to 8 IEEE 802.3at devices powered
• IEEE 802.3af/at Power over Ethernet End-Span PSE compliant
• Up to 30 watts for each PoE port support
• Auto detect powered device (PD)
• Remote power that feeds up to 328 ft. (100m)
Design
• Slim IP-30 metal enclosure
• Wall mount or magnet fittings
• 52~56VDC operation
• Terminal block or DC receptacle for power
• Voltage/surge-supression (EFT 6000VDC protection for power lines or ESD
6000VDC protection for Ethernet)
• IEC60068-2-xx stanards compliant for free-fall, shock and vibration
• Wide operating temperature range of -40°C~70°C
Warranty
• 3-year limited warranty
Robust Hardened Design
With an IP-30 rated enclosure, IFS Industrial Gigabit Managed
Switches protect against electromagnetic (EMI) and radio-frequency
(RFI) interference typically found in industrial environments. This
series of switches comply with IEC60068-2-xx standards for free-fall,
shock, and vibration and operate in -40°C~75°C temperatures found
in difficult environments such as plant floors or in curbside traffic
control cabinets.
interlogix.com/ifs
Specifications
PART NO. NS3562-8P-2S
10/100/1000Base-T Ports RJ-45 (8)
100/1000Base-X SFP Ports SFP Ports (2)
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Electro Static Discharge
Physical Ports
(ESD) Protection
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps/non-blocking
Throughput
(Packet per second)
Address Table 8K entries
Share Data Buffer 4Mbit
Maximum Frame Size 9K Bytes (Jumbo Frames)
Switch Performance
Flow Control Back pressure for Half-Duplex
Port Configuration Port disable/enable, Auto-negotiation 10/1000/1000Mbps full and half-duplex mode selection, Flow control
Port Status Display each port’s speed Auto negotiation status, duplex mode, link status, Flow control status
Bandwidth Control Bandwidth control per port: Ingress: 500Kb~1000Mbps, Egress: 500Kb~1000Mbps
Spanning Tree IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple spanning tree protocol
VLAN 802.1Q Tagged Based VLAN, up to 255 VLAN groups
Multicast IGMP (v2/v3) Snooping, up to 255 multicast Groups
Layer 2
QoS Traffic classification based, Strict priority and WRR 8-Level priority for switching
Port Mirroring RX / TX / Both
Security IEEE 802.1x Port-Based / MAC-Based network access authentication. RADIUS users access authentication.
SMNP MIBs RFC-1213 MIB-II, IF-MIB, RFC-1493 Bridge MIB, RFC-1643 Ethernet MIB, RFC-2863 Interface MIB,
Link Aggregation IEEE 802.3ad LACP / Static Trunk, Supports 1 group of 2 SFP ports per trunk
Management Interface Console, Telenet, Web Browser, SNMP v1, v2c and v3
6K VDC
14.8Mpps @64Bytes
IEEE 802.3x Pause Frame for Full-Duplex
disable/enable and bandwidth control on each port
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-Based VLAN
Protocol-Based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
IGMP Querier mode support
MLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Querier mode support
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IP-Based Access Control List (ACL). MAC-Based Access Control List. Source MAC / IP address binding. DHCP
Snooping. Dynamic ARP Inspection. IP Source Guard. Auto DoS rule. IP address access management.
RFC-2665 Ether-Like MIB, RFC-2819 RMON MIB (Group 1, 2, 3 and 9), RFC-2737 Entity MIB,
RFC-2618 RADIUS Client MIB, RFC-2933 IGMP-STD-MIB, RFC3411 SNMP-Frameworks-MIB,
IEEE 802.1X PAE, LLDP, MAU-MIB
Specifications
PART NO. NS3562-8P-2S
IEEE PoE Standard IEEE 802.3af/IEEE 802.3at Power over Ethernet/PSE
Total Max. PoE Power Budget 200W
Maximum Devices 8
(PoE)
Output Power (per-port) 48~56 VDC, 350mA max. 15.4 watts (IEEE 802.3af) or 48~56 VDC, 590mA max. 30 watts (IEEE 802.3at) per
port - dependent on power supply used
Power over Ethernet
PoE Pin Assignment 1/2(+), 3/6(-)
System Power (Green)
10/100/1000Mbps Ports PoE in-Use (Amber)
LNK/ACT (Green)
Indicators
SFP GigE Uplink Ports 1000 (Green), LNK/ACT (Amber)
LED Status
Power Input 1 (Primary Power) 52~56VDC
Electrical Fast Transient (EFT)
Protection
Power Connector 3-pin terminal block or DC power receptacle
Enclosure IP-30 Metal Case
Mounting Wall-mount
Dimensions (in/cm) (W x D x H) 7 x 1 x 5.5 in., (178 x 25 x 134mm)
Electrical & Mechanical
Weight (lbs/g) 1.41 lbs., 640g
Operating Temperature -40ºC~75ºC
6KV DC
Storage Temperature -40ºC~85ºC
Relative Humidity 5%~95% (non-condensing)
Environmental
Regulatory Standards FCC Part 15 Class A, CE
IEEE/RFC Standards IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.3af Power over Ethernet
RFC 768 UDP
RFC 793 TFTP
Standards Compliance
IEC Standards IEC60068-2-32 (Free fall)
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP Version 1
RFC 2236 IGMP Version 2
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
NS3562-8P-2S
5.83 in. (148mm)
7.01 in. (178mm)
6.42 in. (163mm)
.24 in. (6mm)
.95 in.
(24.2mm)
910
Reset
PWR
SFP
9
10
PoE In-use
ACTLNK
PoE In-use
ACTLNK
ACTLNK
ACTLNK
1000
100
3421
7865
DC Input Range
48-56V
V+
V
-
Ground
8-Port Gigabit PoE+ Industrial Managed Switch
NS3562-8P-2S
SFP
9 10
PoE
PoE
Low-profile Wall-mount
Industrial PoE+ Managed Switch
Dimensional Diagrams
5.83 in. (148mm)
7.01 in. (178mm)
6.42 in. (163mm)
Ground
-
V
4.65 in. (118mm)
V+
DC Input Range
48-56V
8-Port Gigabit PoE+ Industrial Managed Switch
NS3562-8P-2S
SFP
9 10
PoE In-use
PoE In-use
ACTLNK
ACTLNK
PoE
3421
PWR
9
SFP
10
ACTLNK
1000
100
ACTLNK
.24 in. (6mm)
PoE
7865
910
Ordering Information
NS3562-8P-2S
Included
Accessories
Note: This switch requires a Small Form-factor Pluggable (SFP) for optical uplink use. IFS SFPs
are available for multi-mode, single mode, and 1 or 2 fibers for various transmission distances over
Low-profile Wall-mount Industrial PoE+ Managed Switch
(Wide Operating Temp. -40°C~75ºC)
User’s Manual, Wall Mount Kit, Magnet Kit
Reset
.95 in.
(24.2mm)
optical fiber. Please refer to the IFS SFP data sheet to select the appropriate SFP for your particular
application needs. IFS S25 or S35 Series SFPs are recommended.
Note: External power supply must be purchased separately.
Accessories
SFP
SFP
SFP
SFP
PS48VDC480W-DIN
S30 Series
S35 Series (wide-temp)
S20 Series
S25 Series (wide-temp)
48VDC Industrial 480W DIN-rail Power Supply
interlogix.com
Specifications subject to change without notice.
© 2016 United Technologies Corporation.
All rights reserved.
All trademarks are the propert y of their respective owners.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
20 16/11 ( G S P -2111)
Loading...