Interlogix 5825A-W Specsheet
Acoustic Glassbreak Sensor
Recessed ShatterPro™ II and Accessories
5820A Series
www.GE-Interlogix.com
GE Glassbreak Sensors
Product Information
Standard Features
Recess mounts in a 1-inch diameter hole in ceiling
or wall
25' radius range protects an entire room with
one sensor
Protective sleeve makes removal easy
Single Gang Box Kit for Prewire and Flush Mounting
Model Numbers
5820A-W, 5822A-W, 5825-W
The 5820A Series Recessed ShatterPro™II is designed for use
when sensor appearance is a consideration. The 5820A recessed
model can be mounted directly into the wall or ceiling or can be
used with the single gang box accessory. A trim ring is included.
Using our patented Pattern Recognition Technology
™
, the sensor
listens for the actual pattern of breaking glass while eliminating
most false alarm patterns. Recessed ShatterPro II sensors listen
across the glass break frequency spectrum to differentiate the
sound of breaking glass from most normal room sounds.
The test feature makes installation faster by eliminating the test
mode jumper. The Recessed ShatterPro II is tested by activating
the hand-held glassbreak tester at close range. Opening the
sensor is unnecessary.
A simple hand-clap feature lets end-users confirm at any time
that the Recessed ShatterPro II is operational. The sensor will
blink twice.
The 5820A Recessed ShatterPro II detects in a full 360° coverage
pattern, with a 25' (7.5 m) radius range from sensor to glass. The
Recessed ShatterPro II is suitable for use in quiet occupied areas
on the perimeter loop.
Overview
5820A
Acoustic Glassbreak Sensor
Recessed ShatterPro™ II and Accessories
5820A Series
©2003 GE Interlogix. ShatterPro and Pattern Recognition Technology are trademarks of GE Interlogix. All other trademarks are properties of their owners.
G-2732-2000KA-0103
Specifications
Electrical
Operational voltage 9 to 16V DC
Current draw 12mA typical; 25mA max.
Relay output Normally closed,
open 4 seconds on alarm
On resistance 5 to 20 Ω
Off resistance >1 MΩ
Maximum loop rating
(relay or tamper loop) 16VDC, 50mA
Fails safe and opens on power loss
Environmental
Lightning suppression 400 watts for 1 msec pulse
Operating temperature 0°F to 120°F (-18°C to +50°C)
RFI immunity 10 V/meter from 1 to 1000MHz
Features
Housing material Flame retardant ABS plastic
Microphone Omni-directional 360° electret
Sensitivity setting Factory set
Range 25' (7.5m) measured to the farthest
point of glass
25' (7.5m) on the opposite wall
Glass types detected
Plate glass
3
/32" to 1/4" (2.39 to 6.4mm)
Tempered glass
1
/
8" to
1
/
4" (.125 to 6.4mm)
Wired glass
1
/4" (6.4 mm)
Laminated glass
1
/8" to 1/4" (.125 to 6.4mm)
Mounting location Ceiling or any wall adjacent or
opposite to glass
Minimum distance from glass 3.3' (1m)
Dimensions 2.50" (64mm) D x 1.35" (34mm) W
Color White
Listing UL-639
GE Interlogix
www.GE-Interlogix.com 2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5484
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
Dimensions – 5820A
Mounting Location Range
Recessed ShatterPro II, latch or non-latch LED White
Recessed ShatterPro II, tamper, latch or non-latch LED White UL
Hand-held Tester White
Single Gang Box Kit with ShatterPro II White
5820A-W
5822A-W
5709C-W
5825A-W
Ordering Information
Model Description Color Listing
2.75"
(69.9mm)
4.5"
(114.3mm)
Dimensions – 5829A
Range measured to the furthest glass
m
Sensor has 360° coverage
2.50"
64mm
1.00"
25mm
)
25’ (7.5 m
25’ (7.5 m)
2.50"
64mm
1.35"
35mm
2.53"
64.3m
Loading...