Interlogix 5820A-W Specsheet

Acoustic Glassbreak Sensor

Recessed ShatterPro™ II and Accessories

5820A Series

Product Information

Standard Features

Recess mounts in a 1-inch diameter hole in ceiling or wall

25' radius range protects an entire room with one sensor

Protective sleeve makes removal easy

Single Gang Box Kit for Prewire and Flush Mounting

Model Numbers

5820A-W, 5822A-W, 5825-W

The 5820A Series Recessed ShatterPro™II is designed for use

when sensor appearance is a consideration. The 5820A recessed

model can be mounted directly into the wall or ceiling or can be

used with the single gang box accessory. A trim ring is included.

Using our patented Pattern Recognition Technology

™

, the sensor

listens for the actual pattern of breaking glass while eliminating

most false alarm patterns. Recessed ShatterPro II sensors listen

across the glass break frequency spectrum to differentiate the

sound of breaking glass from most normal room sounds.

The test feature makes installation faster by eliminating the test

mode jumper. The Recessed ShatterPro II is tested by activating

the hand-held glassbreak tester at close range. Opening the

sensor is unnecessary.

A simple hand-clap feature lets end-users confirm at any time

that the Recessed ShatterPro II is operational. The sensor will

blink twice.

The 5820A Recessed ShatterPro II detects in a full 360° coverage

pattern, with a 25' (7.5 m) radius range from sensor to glass. The

Recessed ShatterPro II is suitable for use in quiet occupied areas

on the perimeter loop.

Overview

5820A

Acoustic Glassbreak Sensor

Recessed ShatterPro™ II and Accessories 5820A Series

Specifications

Electrical

Operational voltage 9 to 16V DC Current draw 12mA typical; 25mA max. Relay output Normally closed,

open 4 seconds on alarm

On resistance 5 to 20 Ω Off resistance >1 MΩ Maximum loop rating (relay or tamper loop) 16VDC, 50mA

Fails safe and opens on power loss

Environmental

Lightning suppression 400 watts for 1 msec pulse Operating temperature 0°F to 120°F (-18°C to +50°C) RFI immunity 10 V/meter from 1 to 1000MHz

Features

Housing material Flame retardant ABS plastic Microphone Omni-directional 360° electret Sensitivity setting Factory set Range 25' (7.5m) measured to the farthest

point of glass 25' (7.5m) on the opposite wall

Glass types detected

Plate glass

/32" to 1/4" (2.39 to 6.4mm)

Tempered glass

8" to

4" (.125 to 6.4mm)

Wired glass

/4" (6.4 mm)

Laminated glass

/8" to 1/4" (.125 to 6.4mm)

Mounting location Ceiling or any wall adjacent or

opposite to glass

Minimum distance from glass 3.3' (1m) Dimensions 2.50" (64mm) D x 1.35" (34mm) W Color White Listing UL-639

Dimensions – 5820A

Mounting Location Range

Recessed ShatterPro II, latch or non-latch LED White Recessed ShatterPro II, tamper, latch or non-latch LED White UL Hand-held Tester White Single Gang Box Kit with ShatterPro II White

5820A-W 5822A-W 5709C-W 5825A-W

Ordering Information

Model Description Color Listing

2.75"

(69.9mm)

4.5"

(114.3mm)

Dimensions – 5829A

Range measured to the furthest glass

Sensor has 360° coverage

2.50"

64mm

1.00"

25mm

)

25’ (7.5 m

25’ (7.5 m)

2.50"

64mm

1.35"

35mm

2.53"

64.3m