Interlogix 5812A-W, 5815A-W Specsheet

S E N T R O L

P R O D U C T I N F O R M A T I O N B U L L E T I N

5812A SERIES ACOUSTIC

GLASSBREAK SENSOR

• Designed for quiet occupied areas on the perimeter loop

• End-user can test sensor operation with a clap of the hands

• Listens across the glassbreak frequency spectrum for greater false alarm immunity

• Consistent detection even of soft, quiet glass breaks

• Detects through blinds and light drapes

ShatterPro

Model numbers: 5812A-W, 5815A-W, SPRES

The Sentrol 5812A Series ShatterPro

acoustic glassbreak sensor provides great false

alarm immunity, fast installation testing, and a hand-

clap feature that lets end-users confirm the sensor’s

operational status.

Using Sentrol’s patented Pattern Recognition

Technology™, the sensor listens for actual patterns of

breaking glass while eliminating most false alarm

patterns. ShatterPro™ II sensors listen across the

glassbreak frequency spectrum for greater false alarm

immunity.

A new test feature makes installation faster by

eliminating the test mode jumper. The ShatterPro™ II

is tested by activating the Sentrol hand-held

glassbreak tester at close range. Opening the sensor is

unnecessary.

A simple hand-clap feature lets end-users confirm at

any time that the ShatterPro

sensor will blink twice but will not trip when a hand

clap is made close to the unit.

The ShatterPro

pattern, with a 25' (7.5 m) radius from sensor to glass.

The ShatterPro™ II is suitable for use in quiet occupied

areas on the perimeter loop.

™

II detects in a full 360° coverage

™

II is operational. The

™

continued

Sentrol 5810A Series ShatterPro

™

Specifications:

Electrical

Operational voltage ........................................... 9 to 16 V DC

Current draw ................................ 12 mA typical; 25 mA max.

Relay output ......... Normally closed, open 4 seconds on alarm

On resistance ................................................. 5 to 15 Ohms

Off resistance ..................................................... 20 MOhms

Maximum loop rating

(relay or tamper loop .............................. 16 V DC, 50mA

Fails safe and opens on power loss

Environmental

Lightning suppression ................... 400 watts for 1 msec pulse

Operating temperature ............ 0°F to 120°F (-18°C to +50°C)

RFI immunity ......................... 20 V/meter from 1 to 1000MHz

Features

Housing material ........................... Flame retardant ABS plastic

Microphone ............................. Omni-directional 360° electret

Sensitivity setting .................................................... Factory set

Range ......................................... 25' (7.5 m) measured to the

farthest point on all glass

25' (7.5 m) on the opposite wall

Glass types detected

Plate glass ............................................... Up to

Tempered glass ...................................... Up to 1⁄4" (6.4 mm)

Wired glass ............................................. Up to

Laminated glass ...................................... Up to

⁄4" (6.4 mm)

Mounting location ...................................... Ceiling or any wall

Minimum distance from glass ................................... 3.3' (1 m)

Dimensions ................................................... 1.75" (4.5 cm) H

3.25" (8.3 cm) W

0.88" (2.3 cm) D

Color .............................................................................. White

Mounting Location Range ___________________________________________________________________________________

25' (7.5 m)

Range measured to the farthest glass

360° coverage

Dimensions __________________________________________________________________________________________________

1.75"

4.5 cm

Front View

3.25"

8.3 cm

1.75"

4.5 cm

Side View

0.88"

2.3 cm

Ordering Information

Description Model Number Color Listing

ShatterPro II, tamper, latch or non-latch LED 5812A-W White UL

ShatterPro II, tamper, Form C, latch or non-latch LED 5815A-W White ULC

Hand-held Tester 5709C-W White

ShatterPro Residential SPRES White

CORPORATE HEADQUARTERS

12345 SW Leveton Dr., Tualatin, OR 97062 Tel.: 503.692.4052 Fax: 503.691.7566 http://www.sentrol.com

Sentrol reserves the right

to change specifications

without notice.

U.S. & Canada: 800.547.2556 Technical Service: 800.648.7424

SENTROL

FaxBack: 800.483.2495

G-3225-FLG20K-1297