Interlogix 5600-W, 5620-W Specsheet

S E N T R O L

P R O D U C T I N F O R M A T I O N B U L L E T I N

5600 SERIES

“Tru-Dual” Transducer
Glassbreak Sensor

Model numbers: 5600-W, 5605-W, 5620-W, 5625-W

• Effective in harsh environments
such as kitchens and laundry
rooms – even behind drapes
and blinds

• Ideal for detection on sliding
glass doors, picture windows
and windows that open

• Protects up to 10' (3 m) of glass

• Double detection – glassbreak
and forced opening

• Excellent false alarm immunity

• Ideal for occupied areas

Sentrol’s 5600 Series ShatterPoint™ “Tru-Dual”
Transducer Sensor provides superior false alarm

immunity and perimeter protection for a single point of
entry such as sliding glass doors, side-light windows,
kitchen windows, or large picture windows up to 10' (3 m)
of range. The sensor mounts to any frame behind drapes
and blinds, so there is no worry about shadowing the
sensor. The 5620 models, with built-in reed switch, offer
a perfect and economical solution for detection of all
forced entries.

The sensor’s “Tru-Dual” transducer design,
effectively eliminates room noise false alarms, making
this sensor ideal for occupied areas. The pattern­recognizing algorithm enables the sensor to look for the
correct acoustic glass breaking signature from the
microphone and verify the attack with advanced piezo
transducer technology.

No sensitivity adjustment and an automatic test mode
make installation quick and easy. Built-in 90° mounting
allows the 5600 to mount easily to any frame, and easily
accessible terminals help speed wire connections.

continued

Sentrol 5600 Series ShatterPoint™

Specifications:

Electrical

Operational voltage ............................................ 9 to 16V DC

Current draw ..................................12mA typical, 20mA max.

Relay output............. Normally closed, open 4 sec. on alarm

Maximum loop rating ...................................... 16V DC, 50mA

Environmental

Operating temperature ............... 0° to 120°F (-18° to +50°C)

Humidity.....................................10% to 90% noncondensing

Lightning suppression..................400 watts for 1 msec pulse

RFI immunity............................... 20 V/meter, 1 to 1000 MHz

Mounting

3/4"

Models 5620 and 5625

Features

Glass types

Plate......................................3/32" (2.4 mm) to 3/8" (9 mm)

Tempered ............................ 1/8" (3.2 mm) to 1/4" (6.4 mm)

Laminated ............................ 1/8" (3.2 mm) to 1/4" (6.4 mm)

Wired............................................................... 1/4" (6.4 mm)

Range

Single-pane window ......................................up to 10' (3 m)

Multi-pane window........................................up to 8' (2.4 m)

Sliding-glass door .........................................up to 8' (2.4 m)

Mounting location .........................................................Frame

Minimum Glass Size......................12" (30 cm) x 12" (30 cm)

Magnet Gap Distance........................3/4" (1.9 cm) maximum

Housing material................................... Flame retardant ABS

Color .............................................................................. White

Dimensions

Sensor

Mounting Location

3.95"

10.0 cm

Magnet

0.25"

0.64 cm

Inside Mount

Facing Mount

1.5"

3.81 cm

0.375"

0.95 cm

ORDERING INFORMA TION

Description Model No. Color Listing

ShatterPoint™ 5600-W White
ShatterPoint™ with Form C relay and tamper switch 5605-W White
ShatterPoint™ with magnetic contact 5620-W White
ShatterPoint™ with Form C relay, tamper switch, and magnetic contact 5625-W White
Hand-held Tester 5709C-W White
Replacement magnet 1927-W White

1.25"

3.18 cm

0.9"

2.3 cm

SENTROL

CORPORATE HEADQUARTERS

12345 SW Leveton Dr., Tualatin, OR 97062
Tel.: [phone] Fax: [phone]
http://www.sentrol.com

U.S. & Canada: 800.547.2556
Technical Service: 800.648.7424
FaxBack: 800.483.2495

Sentrol reserves the right

to change specifications

without notice.

©1998 Sentrol

G-2401-FLG20K-0297

Printed on recycled paper