Intergraph QuickTime 3 Pro User Manual

Unlocking QuickTime 3 Pro

To unlock the features of the Apple QuickTime 3 Pro software installed on
your system, you must install the Intergraph

1. From the operating system Start menu, go to Settings/Control/QuickTime.

2. In the QuickTime Settings dialog, select Registration from the pop-up menu,

and then click Enter Registration.

3. In the Enter Registration dialog, type your Intergraph key (Intergraphxxxxx

on the sticker below) into the Name box, and your QuickTime 3 Pro key
(20-digit number on the sticker below) into the Registration Number box,
and then click OK. Enter the keys exactly as shown, using zeroes instead of
the letter O.

When installing the Intergraph and QuickTime 3 Pro keys, contact Intergraph
Computer Systems for support. Visit our Support pages on the World Wide
Web at http://www.intergraph.com/ics or call the Customer Response Center
at 1-800-633-7248.

For more information on registering QuickTime 3 Pro, visit Apple Computer on
the World Wide Web at http://www.apple.com/quicktime/rights/win/.

When using QuickTime 3 Pro, contact Apple Computer for support. Visit Apple
Computer on the World Wide Web at http://www.apple.com/quicktime.

 and QuickTime 3 Pro keys:

SERIAL NUMBER LABEL

Intergraph is a registered trademark of Intergraph Corporation. Apple and
QuickTime are registered trademarks of Apple Computer Inc. Other brands and
product names are trademarks of their respective owners.